Hope PF41 Press Fit Stainless Bottom BracketDesigned and manufactured in the UK, this Hope Press Fit bottom bracket has stainless steel bearings and suits BB92 and BB89 bottom bracket shells. It's compatible with any crank with a 24mm axle, such as Shimano Hollowtech II chainsets and SRAM GXP (with separately sold adaptors). It can also easily be serviced with replaceable sealed bearings and external labyrinth seals.Features: Type: Press Fit Bearings: Stainless Steel Axle Compatible: 24mm Cup Diameter Measurements: 41mm external, 24mm internal Bearing cups thread into a centre tube to give a very secure, safe fit Easy to service and replaceable parts Specific fitting tool required - purchased separatelyManufacturer Reference Number: BBPF41SSN Weight: 112g (approx) Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope PF46 Press Fit Stainless Bottom BracketThe external bottom bracket is available with two different bearing options. All common systems are covered with this upgrade unit, making it ideal for Shimano, Race Face and Truvativ (extra conversion kit required).The machined aluminium cups hold either full stainless steel cartridge bearings, or ceramic bearings in stainless races. These custom, Swiss made bearings are double sealed which gives much greater life span than stock units. They are also replaceable. The bearings are made by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability. We use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. The unit is suitable for 68 & 73mm shell width's - with an 83mm width version and a specific road unit.Specification:Fits BB92, BB89.5 and BB86.5 framesCups pressed in and held in place by a screw in centre tube stopping any movement or play usually found in press-fit framesStainless steel or ceramic bearingsEasily serviced, replaceable sealed bearings and external labyrinth sealCompatible with any 24mm axle cranksSpecific fitting tool (made by Hope) required for fitmentBuy Hope PF46 Press Fit Bottom Bracket from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope PF46 Press Fit Stainless Bottom BracketThe external bottom bracket is available with two different bearing options. All common systems are covered with this upgrade unit, making it ideal for Shimano, Race Face and Truvativ (extra conversion kit required).The machined aluminium cups hold either full stainless steel cartridge bearings, or ceramic bearings in stainless races. These custom, Swiss made bearings are double sealed which gives much greater life span than stock units. They are also replaceable. The bearings are made by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability. We use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. The unit is suitable for 68 & 73mm shell width's - with an 83mm width version and a specific road unit.Specification:Fits BB92, BB89.5 and BB86.5 framesCups pressed in and held in place by a screw in centre tube stopping any movement or play usually found in press-fit framesStainless steel or ceramic bearingsEasily serviced, replaceable sealed bearings and external labyrinth sealCompatible with any 24mm axle cranksSpecific fitting tool (made by Hope) required for fitmentBuy Hope PF46 Press Fit Bottom Bracket from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope PF46 Press Fit Stainless Bottom BracketThe external bottom bracket is available with two different bearing options. All common systems are covered with this upgrade unit, making it ideal for Shimano, Race Face and Truvativ (extra conversion kit required).The machined aluminium cups hold either full stainless steel cartridge bearings, or ceramic bearings in stainless races. These custom, Swiss made bearings are double sealed which gives much greater life span than stock units. They are also replaceable. The bearings are made by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability. We use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. The unit is suitable for 68 & 73mm shell width's - with an 83mm width version and a specific road unit.Specification:Fits BB92, BB89.5 and BB86.5 framesCups pressed in and held in place by a screw in centre tube stopping any movement or play usually found in press-fit framesStainless steel or ceramic bearingsEasily serviced, replaceable sealed bearings and external labyrinth sealCompatible with any 24mm axle cranksSpecific fitting tool (made by Hope) required for fitmentBuy Hope PF46 Press Fit Bottom Bracket from Chain Reaction Cycles, the World's Largest Online Bike Store.
FSA BB30 Road Bike Bottom Bracket (OS6000)Accurately machined by FSA to suit road bike BB30 bottom bracket shells, this pair of fully sealed BB30 bearings come with lightweight alloy carriers and durable chrome steel ball bearings. Delivering a smooth rotation and all-weather protection, they ensure you get the most from your drivetrain on every ride.BB30 is a design where the bearings press directly into the frame and seat against circlips installed in machined grooves inside the bottom bracket shell. BB30 compatible shells have a 42mm inner diameter (ID) and have no threading. BB30 bearings have a 30mm ID that directly fit BB30 model cranksets with a 30mm outer diameter (OD) spindle.Features: Material: Alloy Carrier, Chrome Steel BB30 cartridge bearings Bottom Bracket Type: BB30 BB Shell Width: 68mm, Road/BMX Includes: 2x Stainless steel BB30 cartridge bearings, Wave Spring and circlips, Nylon adjustment washers Suits Axle Size: 30mmManufacturer's Part Number: 200-3002 Weight: 50gBuy FSA Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
FSA BB30 MTB Bottom Bracket (OS7000)BB30 MTB uses the same direct fit bottom bracket and Cir-clip design as BB30 - BB30 MTB uses the 30mm inner diameter (ID) bearing, for cranksets with a 30mm diameter (OD alloy spindle.Features: Material: Chrome steel BB30 cartridge bearings BB shell width: 68/73mm for MTB Includes: Cir-clips and bearing covers Weight: 63gBuy FSA Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
FSA BB392EVO 24 Spindle Adapters (EE084)Full Speed Ahead (FSA) produces world class bicycle components for road cycling, MTB, and Triathlon for World Tour teams, club riders and people who just love to ride their bikes. FSA has a long history in the sport of cycling and a strong heritage of innovation in design and manufacturing.Features: Black anodized aluminium cups For MegaExo road carbon cranks Steel bearing Weight: 89gBuy FSA Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
FSA BB386/30 Spindle Adapters (MW258A)The MegaEvo BB30 BB allows the fitting of a 386Evo crankset to a PF30 frameset.Buy FSA Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
FSA PF30 24 Spindle Adapters Road (EE085)Allows the installation of FSA diameter 24mm spindle MegaExo cranksets, as well as Shimano HollowTech II cranksets into BB30 & PF30 road bike bottom bracket shells (BB30 or PF30 BB required, not included).Features: Aluminum with plastic insert For Energy, Gossamer Pro, Gossamer, Vision TriMax, and MegaExo cranksets Weight: 83gBuy FSA Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
FSA BB386EVO CA Spindle Adapters (EE101)Adapts Campagnolo Ultratorque road cranksets into 386EVO BB shells using the Campagnolo bearings that are pre-installed on Ultratorque Cranksets.Features: Aluminum cup Anodized blue Includes Wave Spring Weight: 53.9gBuy FSA Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Rotor BB1 BSA Steel Road Bottom BracketRotor set out with the goal of creating a bottom bracket unlike anything currently available on the market with a flashy and aesthetically appealing look.The BB1 is incredibly light and is sure not to go unnoticed, and the smooth unobtrusive lines marry perfectly with any type compatible crankset, be it made of carbon or aluminium. The BB1 is available in black colour with steel bearings, Enduro Grade5 Ceramic and Enduro Grade3 Ceramic. The steel option offers a light and elegant bottom bracket at a very competitive price while the ceramic bearing options are ideal for those looking to shed every possible gram while at the same time acquiring an incredibly smooth bottom bracket. Both versions are available for road (BSA only) as well as MTB use. The ceramic versions come in at an incredible 91g for the road model, and 95g for the MTB, while the steels comes in at 97g for road and 101g for MTB; still quite impressive.Features: BB1 BSA FOR BSA FRAME Steel: 96g, Ceramic 91g. Black anodized and lasered design. Lathe and CNC T6 heat treated 7075 Aluminium. Labyrinth seals prevent bearing contamination. For all ROTOR and Shimano compatible 24mm cranks.Buy Rotor Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Rotor BB1 BSA Ceramic Road Bottom BracketRotor set out with the goal of creating a bottom bracket unlike anything currently available on the market with a flashy and aesthetically appealing look.The BB1 is incredibly light and is sure not to go unnoticed, and the smooth unobtrusive lines marry perfectly with any type compatible crankset, be it made of carbon or aluminium. The BB1 is available in black colour with steel bearings, Enduro Grade5 Ceramic and Enduro Grade3 Ceramic. The steel option offers a light and elegant bottom bracket at a very competitive price while the ceramic bearing options are ideal for those looking to shed every possible gram while at the same time acquiring an incredibly smooth bottom bracket. Both versions are available for road (BSA only) as well as MTB use. The ceramic versions come in at an incredible 91g for the road model, and 95g for the MTB, while the steels comes in at 97g for road and 101g for MTB; still quite impressive.Features: BB1 BSA FOR BSA FRAMESteel: 96g, Ceramic 91g.Black anodized and lasered design.Lathe and CNC T6 heat treated 7075 Aluminium.Labyrinth seals prevent bearing contamination.For all ROTOR and Shimano compatible 24mm cranks.Buy Rotor Components from Chain Reaction Cycles, the World's Largest Online Bike Store.