Miche EVO Max Cups 24mm SpindleIdeal for use with oversized spindles of 24mm diameter, this superb bottom bracket has been specially engineered for top-notch performance. Featuring lightweight cups made from strong AL 7075-T6 aluminium construction and sealed bearings, you'll notice just how fast and freely your crankset can rotate. Ideal as a replacement for your old or worn out existing model.Features: Material: Cups: Lightweight AL 7075-T6 Aluminium; Shell: Aluminium Spindle Size: 24mm Sealed bearingsBuy Miche Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Miche Supertype Evo Max Bottom BracketThis top-notch bottom bracket is specifically designed for use with 24mm cranks for smooth rolling operation. Its high-quality aluminium press fit cups are compatible with BSA frame standards, so you can enjoy increased stiffness and efficiency. Finally, it weighs only 134g, so you won't have to worry about adding any unnecessary weight to your ride.Features: Bracket Material: AL 7075-T6 Aluminium Cup Material: AL 7075-T6 Aluminium Bearings: SKF sealed Axle Diameter: 24mm Compatibility: 1,370x24tpi BSA, press fit Weight: 134gBuy Miche Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Replacement crank spindle spacers from Jet BMX. 6 pack including 2x 0.5mm, 2x 1.5mm and 2x 3mm spindle spacers
Hope Road Stainless Steel Bottom BracketThe eagerly anticipated road specific external bottom bracket is now available. The machined aluminium cups hold full stainless steel cartridge bearings.These custom, Swiss made bearings are double sealed, fully serviceable and removable which gives a much greater life span than stock units. The bearings are made (as all Hope bearings are) by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability.Hope use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings.Features: External bottom bracket designed for threaded bottom brackets The machined aluminium cups hold either stainless steel cartridge bearings or ceramic bearings in stainless races Custom Swiss made bearings are double sealed which gives a much greater life span than stock units Cartridge bearings are replaceable Designed to suit 24mm crank axles Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Bottom Bracket Truvativ GXP Converter These converter rings are all you need to make your Hope bottom bracket compatible with Truvativ GXP cranks and all SRAM chainsets that have a 24-22mm tapered spindle. Suitable for mountain bike bottom brackets and road and city bikes too. Features: 2 x converter rings Specifically designed for Hope bottom brackets Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope PF41 Press Fit 30mm Bottom BracketHope brings you its PF41 bottom bracket bearings which are ready for 30mm spindles. Normally, with bike frames with 41mm pressfit bottom bracket shells, you can only run cranksets with a 24mm spindle, now you can upgrade to the crankset you want, rather than the only one that will fit. The smooth running fully sealed also ensure your drivetrain will keep running smoothly and in all riding conditions.Features: Type: BB86/92 Crankset Axle Compatibility: 30mm Bottom Bracket Compatibility: 41x89.5, 92, 104.5, 107 and 121mm High-quality stainless steel sealed cartridge bearings Suitable for Road, Mountain Bike (MTB) and Fatbikes PF bottom brackets are designed to fit bikes with a threadless bottom bracket cup Ability to convert the bottom bracket to fit SRAM DUB cranks with a simple shim adaptor (sold separately) Specific fitting tool required (sold separately) Weight: 77gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope PF46 Press Fit Stainless Bottom BracketThe external bottom bracket is available with two different bearing options. All common systems are covered with this upgrade unit, making it ideal for Shimano, Race Face and Truvativ (extra conversion kit required).The machined aluminium cups hold either full stainless steel cartridge bearings, or ceramic bearings in stainless races. These custom, Swiss made bearings are double sealed which gives much greater life span than stock units. They are also replaceable. The bearings are made by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability. We use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. The unit is suitable for 68 & 73mm shell width's - with an 83mm width version and a specific road unit.Specification:Fits BB92, BB89.5 and BB86.5 framesCups pressed in and held in place by a screw in centre tube stopping any movement or play usually found in press-fit framesStainless steel or ceramic bearingsEasily serviced, replaceable sealed bearings and external labyrinth sealCompatible with any 24mm axle cranksSpecific fitting tool (made by Hope) required for fitmentBuy Hope PF46 Press Fit Bottom Bracket from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope PF46 Press Fit Stainless Bottom BracketThe external bottom bracket is available with two different bearing options. All common systems are covered with this upgrade unit, making it ideal for Shimano, Race Face and Truvativ (extra conversion kit required).The machined aluminium cups hold either full stainless steel cartridge bearings, or ceramic bearings in stainless races. These custom, Swiss made bearings are double sealed which gives much greater life span than stock units. They are also replaceable. The bearings are made by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability. We use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. The unit is suitable for 68 & 73mm shell width's - with an 83mm width version and a specific road unit.Specification:Fits BB92, BB89.5 and BB86.5 framesCups pressed in and held in place by a screw in centre tube stopping any movement or play usually found in press-fit framesStainless steel or ceramic bearingsEasily serviced, replaceable sealed bearings and external labyrinth sealCompatible with any 24mm axle cranksSpecific fitting tool (made by Hope) required for fitmentBuy Hope PF46 Press Fit Bottom Bracket from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope PF46 Press Fit Stainless Bottom BracketThe external bottom bracket is available with two different bearing options. All common systems are covered with this upgrade unit, making it ideal for Shimano, Race Face and Truvativ (extra conversion kit required).The machined aluminium cups hold either full stainless steel cartridge bearings, or ceramic bearings in stainless races. These custom, Swiss made bearings are double sealed which gives much greater life span than stock units. They are also replaceable. The bearings are made by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability. We use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. The unit is suitable for 68 & 73mm shell width's - with an 83mm width version and a specific road unit.Specification:Fits BB92, BB89.5 and BB86.5 framesCups pressed in and held in place by a screw in centre tube stopping any movement or play usually found in press-fit framesStainless steel or ceramic bearingsEasily serviced, replaceable sealed bearings and external labyrinth sealCompatible with any 24mm axle cranksSpecific fitting tool (made by Hope) required for fitmentBuy Hope PF46 Press Fit Bottom Bracket from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope PF41 Press Fit Stainless Bottom BracketDesigned and manufactured in the UK, this Hope Press Fit bottom bracket has stainless steel bearings and suits BB92 and BB89 bottom bracket shells. It's compatible with any crank with a 24mm axle, such as Shimano Hollowtech II chainsets and SRAM GXP (with separately sold adaptors). It can also easily be serviced with replaceable sealed bearings and external labyrinth seals.Features: Type: Press Fit Bearings: Stainless Steel Axle Compatible: 24mm Cup Diameter Measurements: 41mm external, 24mm internal Bearing cups thread into a centre tube to give a very secure, safe fit Easy to service and replaceable parts Specific fitting tool required - purchased separatelyManufacturer Reference Number: BBPF41SSN Weight: 112g (approx) Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
NO KEYS REQUIREDWith the added convenience of an integrated four digit resettable combination lock there’s no need to carry a key. Create your own unique four digit code for easy locking every time. WEARABLE DESIGNThe lightest wearable chain lock SPIN features Hiplok’s wearable fastening adjusts to fit your waist without being locked to your body providing a safe and convenient way to carry a secure chain lock. TRUSTED SECURITYRobust security for everyday locking the Hiplok SPIN has a premium quality hardened steel 6mm steel chain at it’s core to give you peace of mind. SECURE WEARABLE CHAIN LOCK 6MM HARDENED STEEL CHAIN INTEGRATED 4-DIGIT COMBINATION LOCK WEARABLE - SAFE & REMOVABLE ADJUSTABLE FIT (26'- 44' WAIST) 75CM LOCKING LENGTH WEIGHT: 800G
NO KEYS REQUIREDWith the added convenience of an integrated four digit resettable combination lock there’s no need to carry a key. Create your own unique four digit code for easy locking every time. WEARABLE DESIGNThe lightest wearable chain lock SPIN features Hiplok’s wearable fastening adjusts to fit your waist without being locked to your body providing a safe and convenient way to carry a secure chain lock. TRUSTED SECURITYRobust security for everyday locking the Hiplok SPIN has a premium quality hardened steel 6mm steel chain at it’s core to give you peace of mind. SECURE WEARABLE CHAIN LOCK 6MM HARDENED STEEL CHAIN INTEGRATED 4-DIGIT COMBINATION LOCK WEARABLE - SAFE & REMOVABLE ADJUSTABLE FIT (26'- 44' WAIST) 75CM LOCKING LENGTH WEIGHT: 800G