Allows the use of 9, 10 and 11 speed Campagnolo cassettes on Elite indoor trainers.
With the increasing popularity of E-bikes, Race Face has answered the call by modifying its rock-solid Aeffect crank arm specifically for E-bike riders. This model benefits from increased clearance while still optimising its Q-factor, and a redesigned spline interface to maximise strength. This is the perfect choice of upgrade for a solid and reliable riding experience.
LifeLine Go-Through Socket Set (34 Piece)The LifeLine Pro 34 piece Go -Through socket set is a great value, professional quality and high performance tool set which has been selected specifically for the Bicycle workshop. The Go-Though sockets remove the need for deep section sockets as the hollow centre will allow long items to pass through and stay out of the way.The comprehensive set comes complete in a robust plastic carry case, which will protect them from damage, help you keep them in order and prevent you from loosing any!Features: Manufactured from Chrome Vandium Steel High Polish Finish 1/4” Drive Go-Through ratchet handle with rotation adjustment lever, 48T ratchet for super fast engagement and dual density rubber handle for excellent durability, comfort and grip. 3/8” Drive Go-Through ratchet handle with rotation adjustment lever, 48T ratchet for super fast engagement and dual density rubber handle for excellent durability, comfort and grip. 1/4” to 1/4" Coupler which allows ratchet to be used with LifeLine Pro Ratchet wrench fittings 13 x 1/4" Go-Through sockets - 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 and 14mm 13 x 3/8" Go-Through sockets - 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24mm 1/4” - 75mm extension bar 3/8” - 75mm extension bar 1/4” Go-Through to 1/4” Adapter with Quick Release 3/8” Go-Through to 3/8” Adapter with Quick Release 3/8” Go-Through to 1/2” Adapter with Quick Release Blow moulded plastic carry case Buy LifeLine Products from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Preset Torque Driver (PTD-5)This shop quality pre-set torque driver limits torque applied to fasteners, preventing over-tightening and damage to lightweight components. The PTD-5 features all metal internal construction with a comfortable, ergonomic composite moulded grip. Each tool is assembled and calibrated at The Park Tool factory in Minnesota. Features: Pre-set to 5 Nm ¼ inch hex drive Includes 3, 4, 5mm and T25 bits stored in the handle Limits torque applied to fasteners while rotating clockwise All metal internal construction for long lifeBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Preset Torque Driver PTD-6This shop quality pre-set torque driver limits torque applied to fasteners, preventing over-tightening and damage to lightweight components. The PTD-6 features all metal internal construction with a comfortable, ergonomic composite moulded grip. Each tool is assembled and calibrated at The Park Tool factory in Minnesota. Features: Pre-set to 6 Nm ¼ inch hex drive Includes 3, 4, 5mm and T25 bits stored in the handle Limits torque applied to fasteners while rotating clockwise All metal internal construction for long lifeBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Socket and Bit Set (SBS-1.2)Coming with all the common sized tool heads for getting the job done, Park Tool has created its SBS-1.2 18-piece Socket and Bit Set from a strong and hard-wearing steel so you can rely on it for many years to come. This bike-specific kit also comes in a convenient plastic tray so you can keep all the pieces organised and held together in your toolbox drawer.Features: Material: Chrome Vanadium Steel 3, 4, 5, 6, 8 and 10mm hex bits Long Reach 5 and 6mm hex bits Long Reach T25, T30 and T40 Torx style bits 8, 9, 10, 13, 14, 15mm and 1" sockets (The 1" socket fits various Park Tool Freewheel, Cassette Lockring, and Bottom Bracket tools) Convenient bit and socket holder tray included All sockets and bits are 3/8" drive Sockets Available To Purchase Separately: YesBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Bottom Bracket Bearing Tool Set BBT-30.4Install and extract bottom bracket bearings with this Bottom Bracket Tool Set from Park Tool. This set includes everything required to easily tackle bottom bracket bearings in a range of bracket systems. Efficient Bottom Bracket Bearing RemovalComprised of a bottom bracket bearing remover and two bushings for fitting new bearings, the Bottom Bracket Bearing Tool Set BBT-30.4 is suitable for removing and replacing BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 systems. To remove the bearing, the remover is fed through the shell until the flat head goes into the opposite side bearing. Once engaged, the tool's plastic guide will fit into the near-side shell opening to hold the tool steady while you tap the handle end firmly with a hammer, until the bearing pops out. To install new bearings, the bundled bushings are used with a head cup press (not included) to quickly and accurately press the bearings into the shell.This updated take on the BBT-30.3 features additional length to work with wider fat bottom bracket shells, making the Bottom Bracket Bearing Tool Set BBT-30.4 a great addition to any garage or workshop.Features: Compatibility: BB30, PressFit 30 (PF30), 386EVO, BBright and PF121 bottom bracket systems Included parts: Extra-long bottom bracket bearing remover, 2 x bushings for use with head cup press (sold separately)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Pro Crown Race Setting ToolLifeLine offer a comprehesive range of bicycle tools with quality built-in and at great value prices. Whatever job is looming be it maintenance or a rebuild, LifeLine have the equipment you need.Includes: Setting Tube with One 1.5" setting insert for installing the crown race used on 1.5” headsets Use a hammer and tap the end cap on the tube to seat the race into its proper place.Buy LifeLine Crown Race Setting Tool from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Pro Crown Race Setting ToolLifeLine offer a comprehesive range of bicycle tools with quality built-in and at great value prices. Whatever job is looming be it maintenance or a rebuild, LifeLine have the equipment you need.Includes: Setting Tube with One 1.5" setting insert for installing the crown race used on 1.5” headsets Use a hammer and tap the end cap on the tube to seat the race into its proper place.Buy LifeLine Crown Race Setting Tool from Chain Reaction Cycles, the World's Largest Online Bike Store.
Miche Performance 57mm Drop Brake Caliper SetEnjoy exceptional braking with this Drop Brake Caliper Set from Miche. Featuring a lightweight, hard-wearing alloy construction and a dual-pivot design, this set is the ideal choice for reliable, enhanced braking.Features:Special steel chrome-plated screws and nutsHeat-treated steel pivotsLightweight alloyDual pivotBrake Type: V-BrakeDrop: 41-57mmWeight: 325gBuy Miche Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon StemTested on tough enduro and downhill trails, Nukeproof's Horizon Stem features a sturdy but sleek design, ideal for thrill seeking racing. Taking feedback from Nukeproof's expert riders and staff, this trusted mountain bike stem is lightweight without sacrificing any strength and allows you to adjust the bar height to ensure you're sitting in the optimal riding position.Precision CNC Machined for Strength and To Reduce WeightThe stem can be mounted either way, providing 5mm of bar height adjustability allowing you to tailor your cockpit set up with 5mm rise or fall. It has been precision CNC machined to maintain high strength and to remove unnecessary material to save weight and give a sleek modern, stylish look.Offset Design for Durability and Easier FittingThe Horizon stem steerer clamp features an offset design, which provides maximum thread contact for the steerer bolts. All sharp edges have been removed during the machining process to ensure a smooth feel while eliminating any risk of injury should your body come in contact with the stem. The face plate has also been designed specifically with ""no gap"" at the top to give it a clean look and to make fitting assembly easier.The fitting instructions for this stem can be found HERE for your convenience and are also included within the stem packaging. Features: Precision CNC-machined Opposing offset steerer clamp to give maximum thread contact Knee-friendly steerer clamp design Four-bolt front mount face plate Rise: +/- 5° Stack Height: 35mm Invertible: Yes Stem Cap Included: No Weight: 128g (31.8 x 35mm), 171g (35 x 50mm)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.