Improperly aligned frame and fork dropouts can cause bent axles and quick release skewers as well as tracking and shifting problemsThe FFG-2 quickly determines whether dropouts are aligned and parallelIf an error is detected long handles and comfortable moulded grips afford plenty of leverage for straighteningWorks on frames and forks with dropout spacing up to 160 mm
Taking it's reading directly from the dropout, the FAG-2 will precisely tell you what level of realignment is required to get your bike back to its peak performance. Off-kilter frames often have a detrimental impact on how your bike rides and even after wheel and derailleur adjustments, your wheels may still not be lined up properly. However, with this Frame Alignment Gauge and its retractable pointer, the exact realignment can be pin-pointed quickly and precisely for any size of bike. The FAG-2 is an ideal device to help make sure your bike and wheels are perfectly aligned for optimum performance.
Designed to cut new threads on fork steerers, or clean up existing threadsExpandable cutting dies are made from the highest quality high speed steel, to ensure a precision cut and a long lifeThe thread guide system allows the metal shavings produced to fall through the guide, preventing damage to the threadsIncludes a 1 inch x 24 tpi cutting die, and a 1 inch cutting guide1-1/8 inch x 26 die, 1-1/4 inch x 26 die, 1-1/8 inch guide, and 1-1/4 inch guide are also available, and will fit the same handle
Park Tool Head Tube Reaming/Facing Set (HTR-HS)This tool is ideal for customising the actual setup that you require for your bike maintenance. This tool can be modified to face headsets and bottom brackets, press in bearings and headset cups or simply to ream a section of the frame which needs a little more clearance.Build your own specific tool by adding cutters, reamers and facers to this base tool unit. This kit includes the handle, shaft and the quick release centre cone & nut. Over 20 different reamers and facers are compatible with this central assembly, for numerous headset and bottom bracket standards.Note that no reamers, facers or pilots are included with this set.Features:Park Tool part #: HTR-HSUniversally customisable tool for many usesCreate your own tool rather than having many different variants of the same designBuy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Heavy Duty Steel Tyre Lever Set TL-5The TL-5 Heavy Duty Tire Lever Set is designed for use on the toughest tire and rim combinations. Made of forged steel, these beefy levers are a full 8" (20.3cm) long for superior leverage. Specially designed tip engages tire bead so it can be removed with just two levers. Ideal for difficult to remove downhill and freestyle tires. Set of two.Buy Park Tool Heavy Duty Steel Tyre Lever from Chain Reaction Cycles, the World's Largest Online Bike Store.
Three hex wrenches in an effective packageExcellent ergonomics and effective leverage as the composite centre fits into the palm of the handSpeeds any job up as you have three hex keys in your hand at any one timeMade from heat-treated Bondhus Protanium high torque steel for a long life4 5 and 6 mmMade in the USA and covered by Park Tool's legendary limited lifetime warranty
The Park Tool HTR1 Head Tube Reaming and Facing Set allows for proper frame preparation. The HTR1 combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. The HTR1 comes complete with a 30.0mm reamer, and four different size pilots, (29.8mm, 30.0mm, 33.8mm, and 36.8mm). There are cases when a reamer is required to clean out or increase the diameter of the head tube. Most times however, facing of the head tube for good cup fit is the objective. In this case, reaming is not necessary and the pilots can be used in place of the reamers to keep the tool straight and create a faced head tube. The unique part of the HTR1 is the quick-release, quick adjust feature. The bottom portion can slide off and on easily without the long threading process. This portion of the tool can still be fine tuned while in use. The tapered centering cone unit rides on a bearing for extra smooth operation. All cutting surfaces are top quality and extra sharp.
Proper frame preparation is very importantThe HTR-1B combines reaming and / or facing of the head tube to create a perfect fit for most sizes of headset cupsThe HTR-1B comes complete with a 33.8 mm reamer and four different size pilots (29.8 mm 30.0 mm 33.8 mm and 36.8 mm)The reamer is used to clean out or increase the diameter of the head tubeMost often facing of the head tube for good cup fit is the objective and no reaming is required in which case the pilots can be used in place of the reamersThe unique quick-release quick-adjust feature allows you to slide the bottom portion on and off easily without the long threading processThis threading function of the tool can still be fine tuned whilst in useThe tapered centring cone unit rides on a bearing for extra smooth operationAll cutting surfaces are top quality and extra sharp
Park Tool Hex wrenches made from industrial tool steel, hardened and tempered for shop use. Shop quality L-Shaped stubby hex keys fit into tight fixtures such as caliper mounting bolts and chainring bolts. Made from high-torque industrial steel with chamfered tips for tight tolerances. 1.5, 2, 2.5, 3, 4, 5, and 6mm hex sizes fit neatly into carrying case. HXS-3 Hex Keys are intentionally kept very short 6-20mm in depth to be the specific tool needed to reach fixtures where standard hex keys are impossible to reach.
The Park Tool HXS1 are shop quality L-shaped hex wrenches which have a genuine Bondhus balldriver tip on the long arm (excluding 8 and 10mm) for hard to reach bolt heads and a straight tip on the short arm for high torque applications. The wrench tips are precision chamfered for a clean, tight fit. Special speed bearing attachment facilitates installation and removal of long-threaded bolts. Wrenches are made from industrial quality Bondhus Protanium high torque steel through hardened for long life. Set includes 2, 2.5, 3, 4, 5, 6, 8, and 10mm sizes. The same shop quality L-shaped hex wrenches as the HXS2, but without the bench mount/wall mount holder.
FeaturesPopular home and professional workshop item, giving a set of all popular Hex wrenches,Includes 2, 2.5, 3, 4, 5, 6, 8, and 10 mm sizes,Bondhus Balldriver tip on the long arm (except on 8 mm and 10 mm sizes) allows access to awkwardly placed bolts,Speed Bearing system on 3, 4, 5, 6, and 8 mm allows quick fitting of bolts,Super strong 8650 Cr-Vntool steel,Holder features tapered holes for easy location,.
Perfect for taking on every rideUnique Park I-Beam technology is strong compact and lightweightThe I-Beam creates a structure to mount all the tools onto3 4 5 6 and 8 mm hex wrenches cover most fixings on a bike including many crank boltsA straight blade screwdriver is useful for adjusting screws on brake and gear componentsAll tools fold into the I-Beam to create a neat regular shape that will slip easily into a jersey pocket or seatpackA must have take-along tool for road and off-road use