With the advent of thru-axle technology; first on forks and more recently on frames, moving wheels between different bikes can cause headaches. However one of the main benefits of Hope's hub range is that they can be quickly converted to run any front or rear axle standard on the market today. The conversion kits are constructed from the same high grade CNC machined aluminium and simply press fit into the ends of the hub body to have you up and running in minutes.
Zipp s 303 Firecrest Tubeless Disc-brake Front Wheel is designed for the real world a world of imperfect conditions, road surfaces, and elements where the bottom line is simple. Efficiency = speed. It s faster, lighter, and more capable over varied terrain, whether the surface is pavement in all its conditions or no pavement at all. New Zipp graphics and cosmetic identity that scream speedVersatile endurance wheel for the modern road bike with tubeless and hookless rim profileLighter Weight than its predecessor, making it nimble and fast.Tubeless Made Easy, optimised tyre bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tyre.Ultra-wide 25mm rim profile creates a better tyre interface to be fast on or off the roadNew 40mm rim depth makes a light and aero wheel in every situationNew ZR1 DB hub is engineered in Germany with better seal design for improved durabilityShips with 12mm front and rear end capsCentre locking rotor interface. Lock ring is included with the wheelsDeeply rooted in Zipp s drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced: Wind resistance, rolling resistance, rider fatigue, weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 30mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tyre, boosting aero efficiency on the road. The wide rim stance also features less tyre deflection for reduced rolling resistance. The combination of the wider tyre, increased tyre volume, and lower tyre pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions the tyre and wheel system absorbs the shaking, not the rider. At the centre of the 303 Firecrest Tubeless Disc brake is a versatile and durable new hub, the German-engineered ZR1 DB. The 303 Firecrest Tubeless Disc-brake wheel is for dedicated cyclists who aspire to the latest in technology. Its competitors in races, against peers, or simply conquering personal limits. This is about becoming faster and matching your motivation to the most advanced technology.Orientation (wheels): FrontSize (wheels): 700cRim construction: CarbonTire compatibility: Clincher Tubeless ReadyRim depth: 40mmSurface texture: ABLC SawToothBrake compatibility: Disc (Center Lock)Rim - inside width: 25mmRim profile: SymmetricalRim finish: UD fiber, adhesive decalsColor (Decal): StandardNipple material: AluminumNipple anti-rotation: Sapim Secure-LocSpoke type: CX-SprintSpoke count: 24Spoke pattern: 2 CrossHubZ: R1 Disc BrakeDriver body type: n/aColour (hub): BlackAxle type (Wheels): TA 12x100Axle material: Aluminum front & rearBearings: Cartridge - Stainless SteelDriver Mechanism: n/aDriver body material: n/aMax tyre pressure: 73psiMax recommended rider weight: 250lbsPart Weight (g): 613Please Note: The below tyre brands have communicated to us that their tubeless models are compatible with our tubeless hookless straight side wheels. Riders wishing to run regular clincher tyres should check with the manufacturer if they are compatible with hookless rims. This is a guide and we still recommend consumers confirm compliance with their chosen tyre manufacturer: Zipp - Tangente Speed RT25, R28, and the Tangente Course G40 gravel tyreSchwalbe Rene Herse
Burgtec s Penthouse Pedals have developed a bit of a cult following over the years. Designed and produced right here in the UK, they are built to withstand the most challenging of British conditions. The Penthouse is now on its fifth edition, and continues to be an instant hit with aggressive flat pedal riders. Oversized platform with 15mm slimline profile provides incredible grip16 Easy to remove pinsDouble bush and single sealed bearing internalsLightweight 7075 alloy construction and steel axle keep weight downThe MK5 features an oversized platform with 8 pins on each side to provide incredible grip, a 15mm slimline profile to keep weight as low as possible and double bush & single bearing internals for exceptional performance and durability. Offering the perfect balance of grip and low weight performance, combined with a stunning anodised finish in a range of colours, the Burgtec Penthouse MK5s are a serious contender for best flat pedals on the market.
The Burgtec Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider s demands for precision and for those moments when you have to be inch perfect.Forged and Fully CNC machined from AL6061 T6 AluminiumStainless Steel HardwareAvailable lengths: 35mm, 42.5mm and 50mmAvailable in both 31.8mm and 35mm ClampWeight: 35mm 138g, 42.5mm 152g, 50mm 160g9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie PinkFrom the start of the design process, it became clear that Burgtec wanted extra rigidity. To yield this, they would need to make the Stem using a forging process, a new thing for them. The result of which allowed them to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.Another area where they made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. They ve vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as they could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition, and like every Burgtec product, it s fully CNC machined and anodized in all your favourite flavours.
Who doesn't love a bit of colour coordinating or even colour clashing if that's more your thing With Burgtec you can do both! The Burgtec Top Cap is perfect for riders who want to add some colour to their bike, whether that be tastefully or otherwise! Designed to suit 1 1/8 stems, the Top Cap is lovingly machined from aluminium and anodised in a range of stylish colours to match or clash with the rest of the Burgtec range. Only compatible with Burgtec Top Cap Bolt.
Who doesn't love a bit of colour coordinating or even colour clashing if that's more your thing With Burgtec you can do both! The Burgtec Top Cap is perfect for riders who want to add some colour to their bike, whether that be tastefully or otherwise! Designed to suit 1 1/8 stems, the Top Cap is lovingly machined from aluminium and anodised in a range of stylish colours to match or clash with the rest of the Burgtec range. Only compatible with Burgtec Top Cap Bolt.
Clean and simple is often the best policy and the Burgtec Santa Cruz Rear Axle is as simple and clean as it gets. With a lever-less design for added security and clearance when the trail gets tight, this super tough 7075 aluminium axle is compatible select Santa Cruz bikes and is made to their exact specifications. Easily removed with a 6mm Allen key, the Rear Axle also features a get out of jail 6mm Allen key on the non-drive in case you round out the other side. Clever! Not only is the axle tougher, stronger and more user friendly, it's also 20 grams lighter than the stock Santa Cruz axle and is available in the usual range of stylish Burgtec colours. A matching dropout bolt is also included. Lightweight, tough and easy to use, the Burgtec Santa Cruz Rear Axle is the perfect finishing touch to your Santa Cruz bike. Fits all 148mm x 12mm and 142mm x 12mm Exact Axle Length is 168.5mm Thread M12 x 1.0mm pitch also fits other brands that use this size.Fits:5010 V1, V2, V3Bronson V1, V2, V3Nomad V2.1, V3, V4Chameleon V5, V6, V7Heckler V7Bantam V1Blur TR V1.1Blur XC V2.2Blur LT V2.2, V2.1cBlur V3Highball V1, V2, V3Tallboy LT V1.1Tallboy V1.1, V2, V3, V4High Tower V1 and V2High Tower LT V1Mega Tower V1
Clean and simple is often the best policy and the Burgtec Santa Cruz Rear Axle is as simple and clean as it gets. With a lever-less design for added security and clearance when the trail gets tight, this super tough 7075 aluminium axle is compatible select Santa Cruz bikes and is made to their exact specifications. Easily removed with a 6mm Allen key, the Rear Axle also features a get out of jail 6mm Allen key on the non-drive in case you round out the other side. Clever! Not only is the axle tougher, stronger and more user friendly, it's also 20 grams lighter than the stock Santa Cruz axle and is available in the usual range of stylish Burgtec colours. A matching dropout bolt is also included. Lightweight, tough and easy to use, the Burgtec Santa Cruz Rear Axle is the perfect finishing touch to your Santa Cruz bike. Fits all 148mm x 12mm and 142mm x 12mm Exact Axle Length is 168.5mm Thread M12 x 1.0mm pitch also fits other brands that use this size.Fits:5010 V1, V2, V3Bronson V1, V2, V3Nomad V2.1, V3, V4Chameleon V5, V6, V7Heckler V7Bantam V1Blur TR V1.1Blur XC V2.2Blur LT V2.2, V2.1cBlur V3Highball V1, V2, V3Tallboy LT V1.1Tallboy V1.1, V2, V3, V4High Tower V1 and V2High Tower LT V1Mega Tower V1
The Hope Fortus 30 Front Wheel features a wide and optimised rim profile with a 30mm internal width to improve tyre contact area and traction. The Fortus 30 is built to be incredibly strong, making it an ideal choice for hard-hitting enduro and downhill enthusiasts.Incredibly strong 30mm ID welded and eyeletted 6061 T6 Aluminium tubeless ready rim (Tape and Valves included)Durable Hope Pro 4 hubs with stainless steal sealed cartridge bearingsLightweight & strong Sapim Race DB spokes and brass nipplesComplete Fortus 30 wheelset weight from 2230gAs well as being compatible with 2.2-2.6 inch wide tyres they are also tubeless compatible; just add tape, valves & sealant and away you go! The welded and eyeletted rim is constructed of a strong and durable 6061 T6 aluminium, the double butted spokes are black Sapim race stainless steel and the nipples are silver brass. The wheels come equipped with Hope s Pro 4 hub. The boost front wheel option comes built with a 110x15mm boost specific hub. All the wheels are machine built and hand finished in Barnoldswick.How could Hope possibly follow on from the legendary Pro 2 It was always going to be a tough act to follow. But with the Pro 4, Hope have seemingly done the impossible. With a ground up redesign, the Pro 4 hub takes everything that made the Pro 2 great and brings it bang up to date. With larger diameter flanges to help increase stiffness on modern 27.5 and 29 inch wheels with no weight increase, the Pro 4 uses Hope s bullet proof sealed stainless steel cartridge bearings that make for an extremely reliable centrepiece to your wheelset.
Who doesn't love a bit of colour coordinating or even colour clashing if that's more your thing With Burgtec you can do both! The Burgtec Top Cap Bolt is perfect for riders who want to add some colour to their bike, whether that be tastefully or otherwise! Designed to suit 1 1/8 stems, the Top Cap Bolt is lovingly machined from aluminium and anodised in a range of stylish colours to match or clash with the rest of the Burgtec range. Only compatible with Burgtec Top Cap.
Enjoyment can be in the simplest things. That is why using Urban Iki Front seats is made simple! Mounting the seat can be done in within just 5 minutes with the mounting materials. They come standard with the seat. No hassle! Just bike away in a few minutes. Age Range 9 months to 3 yearsWeight Range 9 to 15kgSafe 5-point belt harnessEasy belt adjustment with custom designed seat belt closureSoft shoulder paddingAdjustable footrests and foot strapsSoft rubber, water repellent seat cushionIntegrated drainageErgonomically shaped seatEasy to assemble with click and go mounting on stemTUV tested to EN14344 safety standardFits most ahead and Quill style stemsThe buckle on the 5-point safety belt is designed to open and close in an easy way by parents hands. And adjusting the footrests can be done with one hand. No problem keeping the bike steady when doing so. The Urban Iki is tested at their own testing facility to meet the high Japanese safety standards. Also, the independent German institute TUV tested and approved the Urban Iki Front seat according to EN14344 standard. Guaranteed safety!
The Hope Fortus 30 Front Wheel features a wide and optimised rim profile with a 30mm internal width to improve tyre contact area and traction. The Fortus 30 is built to be incredibly strong, making it an ideal choice for hard-hitting enduro and downhill enthusiasts.Incredibly strong 30mm ID welded and eyeletted 6061 T6 Aluminium tubeless ready rim (Tape and Valves included)Durable Hope Pro 4 hubs with stainless steal sealed cartridge bearingsLightweight & strong Sapim Race DB spokes and brass nipplesComplete Fortus 30 wheelset weight from 2230gAs well as being compatible with 2.2-2.6 inch wide tyres they are also tubeless compatible; just add tape, valves & sealant and away you go! The welded and eyeletted rim is constructed of a strong and durable 6061 T6 aluminium, the double butted spokes are black Sapim race stainless steel and the nipples are silver brass. The wheels come equipped with Hope s Pro 4 hub. The boost front wheel option comes built with a 110x15mm boost specific hub. All the wheels are machine built and hand finished in Barnoldswick.How could Hope possibly follow on from the legendary Pro 2 It was always going to be a tough act to follow. But with the Pro 4, Hope have seemingly done the impossible. With a ground up redesign, the Pro 4 hub takes everything that made the Pro 2 great and brings it bang up to date. With larger diameter flanges to help increase stiffness on modern 27.5 and 29 inch wheels with no weight increase, the Pro 4 uses Hope s bullet proof sealed stainless steel cartridge bearings that make for an extremely reliable centrepiece to your wheelset.