Nukeproof Reactor 290 Alloy Frame - GreyBoasting a rock-solid 6061 aluminium build, this trail-ready mountain bike (MTB) frame is engineered to endure the most demanding of terrain conditions. Thanks to its hydroforming and triple-butting process, it offers extra durability as you charge from trail to trail. Keeping your ride smooth, its RockShox Super Deluxe Ultimate RCT rear shock also gives you increased tuneability and control for superior rear end suspension performance. This makes it perfect for blasting across rock gardens, tree roots and whatever the trail has to throw at you. Coming complete with updated geometry, internal cable routing and 148x12mm rear hub spacing, this full-suspension MTB frame is fully equipped for the demands of modern trail riding.From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at.Full Suspension Alloy MTB FrameThe Alloy Reactor features a custom triple butted hydro-formed tube set and carbon seat stays, which help reduce the overall weight of the frameset. Critically this reduces the unsprung weight; making the suspension as active as possible.The Reactor is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size.Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”?Adjustable GeometryAll Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”.Trail - As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents.Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities.Suspension DesignTo ensure the bike could climb as well as it descends, we designed the four bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride.Features: Material: Nukeproof Reactor 290 Alloy, 130mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven Carbon Fibre seat stays Use: Mountain Bike (MTB) frame Shock: RockShox Super Deluxe Ultimate RCT, Custom ML 320 tune, 210x50mm, Bearing End, 1x bottomless token fitted Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internal cable routing ISCG05 mount Enduro bearings Weight: 3.72Kgs/8.2lbs (Medium option)Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Reactor 290 Alloy Frame - GreyBoasting a rock-solid 6061 aluminium build, this trail-ready mountain bike (MTB) frame is engineered to endure the most demanding of terrain conditions. Thanks to its hydroforming and triple-butting process, it offers extra durability as you charge from trail to trail. Keeping your ride smooth, its RockShox Super Deluxe Ultimate RCT rear shock also gives you increased tuneability and control for superior rear end suspension performance. This makes it perfect for blasting across rock gardens, tree roots and whatever the trail has to throw at you. Coming complete with updated geometry, internal cable routing and 148x12mm rear hub spacing, this full-suspension MTB frame is fully equipped for the demands of modern trail riding.From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at.Full Suspension Alloy MTB FrameThe Alloy Reactor features a custom triple butted hydro-formed tube set and carbon seat stays, which help reduce the overall weight of the frameset. Critically this reduces the unsprung weight; making the suspension as active as possible.The Reactor is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size.Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”?Adjustable GeometryAll Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”.Trail - As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents.Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities.Suspension DesignTo ensure the bike could climb as well as it descends, we designed the four bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride.Features: Material: Nukeproof Reactor 290 Alloy, 130mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven Carbon Fibre seat stays Use: Mountain Bike (MTB) frame Shock: RockShox Super Deluxe Ultimate RCT, Custom ML 320 tune, 210x50mm, Bearing End, 1x bottomless token fitted Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internal cable routing ISCG05 mount Enduro bearings Weight: 3.72Kgs/8.2lbs (Medium option)Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
This trail-ready mountain bike (MTB) frame features a rock-solid 6061 aluminium build, which makes it more than capable of enduring the most demanding of terrain conditions. Nukeproof has also put this model through a hydroforming and triple-butting process for extra durability as you charge from trail to trail. Another highlight is its RockShox Super Deluxe Ultimate RCT rear shock, which gives you increased tuneability and control from your rear end suspension's performance. This makes it ideal for blasting across rock gardens, tree roots and whatever the trail has to throw at you on your ride. Benefitting from updated geometry, internal cable routing and 148x12mm rear hub spacing, this full-suspension MTB frame is fully equipped for the rigours of modern trail riding. From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. Full Suspension Alloy MTB Frame The Alloy Reactor features a custom triple butted hydro-formed tube set and carbon seat stays, which help reduce the overall weight of the frameset. Critically this reduces the unsprung weight; making the suspension as active as possible. The Reactor is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design To ensure the bike could climb as well as it descends, we designed the four bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. Features: Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Reactor 290 Alloy, 130mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fibre Seat stays Internal cable routing ISCG05 mount Enduro bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Two position adjustable Flip chip system Shock: RockShox Super Deluxe Ultimate RCT, Custom ML 320 tune, 210x50mm, Bearing End, 1x bottomless token fitted Headset: Nukeproof, 44-56 IITS Weight: 3.72Kgs/8.2lbs (Medium option)
The Sommet 297 frame features a carbon/alloy construction and is optimised for enduro racing. It offers a sublime balance of high-speed control, exceptional pedalling efficiency and all-day riding comfort. It is also equipped with a 170mm-travel Kashima-coated Fox Float X2 Factory Series rear shock and features geometry that's ideal for use with 170mm-travel suspension forks. This big-hitting Vitus Sommet 297 Mountain Bike frame, specifically designed for a mullet wheel setup, has been enhanced to deliver stability where all around there is chaos. With volume added to the carbon front triangle, the bike feels calm and predictable with no compromise on agility. So, whether you're flinging yourself through the most technical Enduro tape or shredding your steepest local trails you still get that unforgettable rush. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill-seekers and the diehards. This is why you do it. Long-Travel Enduro Race Frame for Mixed-Wheel Platform As the sport of Enduro moves forward, challenging both bike and rider with more technical descents and punchy climbs, the Sommet 297 has been engineered to keep pace. Extensive work has been done to improve small bump sensitivity, smoothing out the trail to keep you firmly in control and reduce pedal bob when you need to lay down more power. There’s a flip-chip to help you refine a setup that best suits your style, internal cable routing to keep everything tidy and the frame is well protected with robust guards on the downtube and chainstays. Dial-in your perfect mullet setup by fitting a big party 29er in the front to keep the rolling momentum high and a business 27.5 at the back for traction and sharp acceleration. The Sommet is not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. This is the perfect foundation from which to build your dream Enduro bike. Key Features: Big-hitting enduro frame with modern geometry Mullet 29" front, 27.5" rear platform balancing speed and agility Adjustable flip-chip to fine-tune handling and your preferred feel Ultra-Smooth Fox Float X2 Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areas Features: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing – 148mm x 12mm thru-axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, Grip2 air spring, 2 position lever, 205mm x 65mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 36.4mm Diameter Carbon Sommet Enduro Platform: Modern geometry with an adjustable flip-chip, improved suspension kinematics and a smile-inducing ride Wheel Size: Mullet - 29" Front / 27.5" Rear Suspension Travel (MTB Only): 170mm Front, 170mm Rear Intended Use: Enduro
Whether you're shredding your favourite local trails with your riding buddies or attacking some technical routes on your own, this full suspension mountain bike (MTB) frame is engineered for performance. It features a robust 6061 aluminium frame construction that's been put through a hydroforming and triple-butting process to ensure maximum strength and durability as you conquer your way around the mountain. Nukeproof has also equipped this model with a dependable RockShox Super Deluxe Ultimate RCT rear shock for smooth and consistent rear end suspension performance, whatever the trail conditions. Coming complete with 148x12mm Boost rear hub spacing and internal cable routing, this is an ideal choice of upgrade for handling the demands modern MTB trail riding. From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. Triple-Butted Alloy MTB Frame The Alloy Reactor features a custom triple butted hydro-formed tube set and carbon seat stays, which help reduce the overall weight of the frameset. Critically this reduces the unsprung weight; making the suspension as active as possible. The Reactor is available for 27.5” or 29” wheel sizes. These are two totally different, compromise-free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design To ensure the bike could climb as well as it descends, Nukeproof designed the four bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. Features: Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 160mm (Comp 150mm) Axle to Crown: 555mm (Comp 545mm) Fork Offset: 46mm Rear Travel: 140mm Wheels Size: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x55mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: S/M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Reactor 275 Alloy, 140mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fibre Seat stays Internal cable routing ISCG05 mount Enduro bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Two position adjustable Flip chip system Shock: RockShox Super Deluxe Ultimate RCT, Custom ML 320 tune, 210x55mm, Bearing End, 1x bottomless token fitted Headset: Nukeproof, 44-56 IITS Weight: 3.79Kgs/8.3lbs (Medium option)
Fast Forward Ryot 33 DT240 Carbon Road Disc WheelsetReady for clocking up the miles on your road bike, this high-quality wheelset features full carbon clincher rims that are specifically developed for exceptional strength, stiffness and an overall low weight. Fast Forward has also equipped this model with Centrelock disc brake compatibility, so you can enjoy powerful and consistent braking performance wherever your ride takes you. Coming kitted out with tubeless-ready technology, it's a great option for riders who want to benefit from lower rolling resistance, increased comfort and fewer chances of flats or punctures.Versatile Road Bike Wheelset with LAW Tech Aero ProfileWith the RYOT33, Fast Forward engineered it to be as versatile as you can imagine by creating a perfectly balanced wheel for many circumstances and terrains. The key ingredient is its LAW Tech aerodynamic rim profile. LAW is short for 'Laminar Airflow Wing' and has been specially developed to deliver better aerodynamics when using wider tyres by creating a smooth airflow. It is the wheel of choice for the cyclist that wants to benefit from all features to be as versatile as possible. Due to its low weight of 1465 grams, it is ideal for climbing mountain roads and offers stability and confidence on the descent. The internal rim width is suitable for tyres up to 42mm making the RYOT33 also perfect for light gravel and cyclocross bikes. DT Swiss 240 EXP Hub SystemThe DT Swiss 240 hubs in the RYOT33 have been improved with an EXP ratchet system. The hub internals now offer an even higher precision with fast engagement and increased stiffness combined with a lower weight. This helps to bring the performance of the wheel to an even higher level.Built for you with the most precision and the same amount of attention that Fast Forward spends on all wheels at its facility in The Netherlands. The wheels are shipped as a complete package with accessories in a nice protective wheel bag. (disc rotors not included).Features: Material: Full Carbon Clincher Use: Road, Light Gravel and Cyclocross Axle: 12x100mm; Rear: 12x142mm Rim Width: 33mm External Rim Width: 30mm Internal Rim Width: 21mm Brake Type: Centrelock Disc Brake Max Tyre Pressure: 8.3 bar; 120 psi Tyre Range: 23mm-42mm Tubeless Ready: Yes Disc Brake Compatible: Yes Rim Brake Compatible: No Inner Tube Compatible: Yes Tubeless Compatible: Yes Tubular Compatible: No Hub Type: DT Swiss 240 EXP Bearings: Stainless Steel Spoke Type: Straight pull Spoke Count: Front: 24; Rear: 24 Nipples: Brass 15mm prolock Single or Pair: Pair 3 year warranty Hand-built in Holland Weight Limit: 120kg Weight: 1465g (pair)Manufacturer's Part Numbers: ASRYOT33FCC240SH Black 700c Shimano 9/10/11sp ASRYOT33FCC240XD Black 700c SRAM XDRBuy Fast Forward Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
We created a groupset that's as capable as today's riders and the bikes that they choose. It offers more range, a smoother gear progression, and the simplicity of eTap shift logic so that you're always in the right gear. AXS allows you to easily personalize the groupset right from your phone and enable your choices while riding. Orbit technology offers next-level chain management for all the places a drop-bar bike can go. Add exceptional disc brake performance from our award-winning HRD platform, and it's true innovation, for true advancement. Specification: 12 Speed Wireless shifting Contains: Shifters Rear derailleur and battery Front derailleur and battery Charger and cord Quick start guide
The 29" version of the legendary S&M ATF frame features a 100% 4130 chromoly frame with an integrated head tube, Mid bottom bracket shell, V-brake mounts and 3/8" dropouts. It comes with the S&M 29" ATF Pitchfork made from 4130 chromoly and features an integrated bearing race with 3/8" dropouts. ###section### Product Specs MATERIAL: 4130 Chromoly HEAD TUBE ANGLE: 69° SEAT TUBE ANGLE: 69° CHAIN STAY LENGTH: 17.75" BB HEIGHT: 12.25" WHEEL SIZE: 29" STANDOVER HEIGHT: 15.25" DROPOUT SIZE: 10mm HEADSET TYPE: Intergrated BB TYPE: Mid BRAKE MOUNTS: Welded GYRO TABS: None WEIGHT: TBC ###section### Product Highlights Longer Backend and Mellow Headtube Angle for stability Great all round frame for all types of riding High-quality Chromoly construction Made in USA Seatclamp not included ###shogun-image-section###
TIMELESS LOOKS & PERFORMANCEWith it's handcrafted steel frame and vintage styling the Endurance 725 evokes the spirit of cycling's past. But make no mistake, this is a steel road bike with a distinctly modern flair. It's a fusion of contemporary frame design with the traditional ride comfort that only a premium steel frameset can provide. Designed with endurance riding in mind the geometry of the Endurance 725 provides stability, comfort and control, with enough adjustability to suit long days in the saddle or a more performance optimised riding position. Full SpecificationFrame: Reynolds 725 Steel, triple-butted, seamless welds. Colour: White with midnight blue accents.Fork: Full carbon fibre monocoque, tapered steerer.Headset: LEVEL 52, 42-52mm, tapered.Brake Fitment: Rim brake caliper.Cable Routing: Internal, including Di2 compatibility.Front Derailleur Mount: Band-on 31.8mm.Bottom Bracket: Threaded BSA 68mm.Seatpost Diameter: 27.2mm.Seatclamp: 31.8mm.Tyre Clearance: 28mm without mudguards fitted, 25mm with mudguards.Mudguard Compatible. Yes.Thru-Axles: 9mm quick release.Sizes: XS, S, M, L, XL.Raw Frame Weight: 2100g (med) - fork 470g +/- 5g.Frame Warranty: 3-years.
If you’re looking for a frame that’s snappy confident and happiest on trails that make other hardtails cry you’ve come to the right place.The Fuse’s M4 aluminum frame is loaded with smart touches. The wide-diameter down tube boosts stiffness. The low-slung top tube gives you the clearance to throw the bike around on tight trails. Adjustable dropouts let you run the Fuse geared or single-speed. Those same dropouts also let you adjust the chainstays by as much as 15 millimeters lengthening the rear end for more stability or shortening it up for quick nimble manners. The Fuse is a piece of rolling art—the kind of functional art that has you dragging handlebars in corners braking way too late and making indecent growling noises mid-ride. The Fuse’s M4 aluminum frame is loaded with smart touches. Wide-diameter down tube boosts stiffness. Low-slung top tube gives you the clearance to throw the bike around on tight trails. Adjustable dropouts let you run the Fuse geared or single-speed. Tune the Fuse to your trails by changing chainstay length as much as 15 millimeters. Frame Specialized M4 Premium Aluminum 148mm thru-axle adjustable dropout SS compatible tapered head tube internal cable routing Seat Binder Alloy 38.6mm
With quick acceleration and a lightweight efficient feel on the climbs this newcomer in the Cosmic family takes over the venerable Ksyrium Pro Carbon UST. Carbon rims and disc-brake control gives you an added advantage in the mountains and hills. It features the same rim as our pro-level SLR 32 model which means superlight full carbon construction for easier climbing and instant acceleration.The 21mm internal rim width is optimized for 28mm tires to deliver a smooth efficient ride on a variety of road surfaces. And new refined spokes help make this rim 80g lighter than its predecessor. Our new Infinity hub platform adds stiffness so the wheels feel quick and responsive out of every corner.Our Road Tubeless system lets you run lower tire pressure for improved rolling efficiency a smoother ride quality and a reduced risk of flats. The new rim bed shape makes it easier than ever to mount and remove tires. If your typical rides include tough climbs technical cornering and descents the Cosmic SL 32 Disc is a fast easy way to supercharge your road bike.These wheels are designed engineered and patented by Mavic in Annecy France and are 100% handmade in our European carbon factory. Key benefits Fast climbing and snappy acceleration Reduced inertia of a lighter weight rim delivers instant acceleration NACA inspired rim shape (32mm deep) minimizes aerodynamic drag Flat double-butted spokes save weight and improve responsiveness Laterally stiff for improved power transfer Our new Infinity hub plaform optimizes lacing and spoke tension to improve wheel stability Strong hub axle and ID360 freewheel technology for instant acceleration Improved UST Road delivers more speed comfort and control in an easy to use tubeless system No tubes means less friction better efficiency and grip a reduced risk of punctures New rim bed shape makes it easier to mount and change tires Rims Tire: UST Tubeless and tubetype Disc brake specific profile Internal width: 21 mm UST tubeless technology Drilling: traditional Height: 32mm ETRTO size: 622x21TC Material: 100% carbon fiber Spokes Count: 24 front and rear Nipples: brass ABS Material: steel Shape: straight pull flat double butted Lacing: front and rear crossed 2 contactless Delivered with User guide UST valve and accessories Front QR adapters Pre-installed tubeless rim tape Rear QR adapters for Instant Drive 360 Hubs Axle material: aluminum Front and rear bodies: aluminum Instant Drive 360 freewheel technology Rear: Quick Release 12x142 and 12x135 compatible QRM Auto bearing preload technology Front: Quick release and 12x100 through axle compatible Infinity hubs Intended use Recommended tire sizes: 25 to 32 mm ASTM CATEGORY 2 : road and offroad with jumps less than 15cm For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 120kg bike included Max Pressure: see indication on wheel and tire If they differ use the lowest of the 2 Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 61bar/88PSI with a 25mm tyre - 35bar/51PSI with a 64mm tyre Compatibility Freewheel: Shimano/Sram convertible to Campagnolo ED11 N3W and XD-R with optional driver bodies Rear axle: 12mm thru axle convertible to Quick Release with included adapters Front axle: 12x100 thru axle easily convertible to quick release with included adapters Not compatible with 15mm through axles Versions Disc standard: Center Lock® only Freewheel: Shimano/Sram or XD-Road Compatible Adapters and freewheel bodies 12 to 9mm front adapter for quick release (V2680301) 12mm front hub cap (V2680501 - Delivered with the wheel) 12x142 rear axle adapters (V2510701 - Delivered with the wheel) 12 to 9mm rear adapter for quick release (V2510801 - Delivered with the wheel) ID360 Shimano / Sram Light freewheel body (V3850101) ID360 Campagnolo freewheel body (V3440101) ID360 XD-R freewheel body (V2580101) ID360 Shimano / Sram freewheel body (V3430101) ID360 N3W freewheel body (V4270101) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
This versatile carbon road wheel is ideal for riders seeking the perfect balance between weight aerodynamics and efficiency. New spokes and hubs give the Cosmic SL 45 Disc a light and lively feel for climbing and accelerating.The rim is engineered with a NACA rim profile that’s 45mm deep and 26mm wide designed specifically for all-rounder performance on flat or hilly terrain. The new rim bed shape makes it easier than ever to fit tubeless and tube-type tires. Riding UST Tubeless means no tube so no friction and more air volume means a smoother ride. The result is a faster ride with super low rolling resistance. Refined spokes make this wheelset 80g lighter than its predecessor the Cosmic Pro Carbon UST Disc. Combined with our all-new Infinity hub platform which makes the wheels feel quick and responsive out of every corner they are stiffer and more efficient.This Cosmic SL 45 Disc is engineered specifically for disc brakes with an optimized spoke count and lacing. They are offered in Center Lock only and are compatible with 12mm thru-axles and can convert to quick release with included adapters. They are available for Shimano and SRAM XD-R cassettes and convert to Campagnolo with an optional driver body.These wheels are designed engineered and patented by Mavic in Annecy France and are 100% handmade in our European carbon factory. Key benefits Accelerate and climb faster hold higher speeds 45mm NACA inspired rim shape minimizes drag for added speed. Reduced inertia of the lightweight rim delivers instant acceleration. Flat double butted spokes save weight and improves responsiveness Versatile performance for all road riding conditions Minimal drag low inertia and high lateral stiffness makes it fast and efficient on all types of terrain from the flats to mountain climbs Disc-brake specific build for improved control and compatibility with 12mm thru axles Improved UST Road delivers more speed comfort and control in an easy to use tubeless system No tubes means less friction better efficiency and grip a reduced risk of punctures New rim bed shape makes it easier to mount and change tires Specifications DELIVERED WITH User guide UST valve and accessories Front QR adapters Pre-installed tubeless rim tape Rear QR adapters for Instant Drive 360 Rims Tire: UST Tubeless and tubetype Height: 45 mm Disc brake specific profile Internal width: 19 mm UST tubeless technology Drilling: traditional ETRTO size: 622x19TC Material: 100% carbon fiber Spokes Count: 24 front and rear Nipples: brass ABS Material: steel Shape: straight pull flat double butted Lacing: front and rear crossed 2 contactless Delivered with User guide UST valve and accessories Front QR adapters Pre-installed tubeless rim tape Rear QR adapters for Instant Drive 360 Hubs Axle material: aluminum Front and rear bodies: aluminum Instant Drive 360 freewheel technology Rear: Quick Release 12x142 and 12x135 compatible QRM Auto bearing preload technology Front: Quick release and 12x100 through axle compatible Infinity hubs Intended use Recommended tire sizes: 25 to 32 mm ASTM CATEGORY 2 : road and offroad with jumps less than 15cm For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 120kg bike included Max Pressure: see indication on wheel and tire If they differ use the lowest of the 2 Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 675bar/97PSI with a 23mm tyre - 38bar/55PSI with a 62mm tyre Compatibility Freewheel: Shimano/Sram convertible to Campagnolo ED11 N3W and XD-R with optional driver bodies Rear axle: 12mm thru axle convertible to Quick Release with included adapters Front axle: 12x100 thru axle easily convertible to quick release with included adapters Not compatible with 15mm through axles Versions Disc standard: Center Lock® only Freewheel: Shimano/Sram or XD-Road Compatible Adapters and freewheel bodies 12 to 9mm front adapter for quick release (V2680301) 12mm front hub cap (V2680501 - Delivered with the wheel) 12x142 rear axle adapters (V2510701 - Delivered with the wheel) 12 to 9mm rear adapter for quick release (V2510801 - Delivered with the wheel) ID360 Shimano / Sram Light freewheel body (V3850101) ID360 Campagnolo freewheel body (V3440101) ID360 XD-R freewheel body (V2580101) ID360 Shimano / Sram freewheel body (V3430101) ID360 N3W freewheel body (V4270101) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape