Nukeproof Reactor 290 Factory Carbon Bike (XT - 2022)Equipped to smoothen out even the toughest and roughest sections of the trails, the Reactor 290 Factory Carbon model brings you professional performance so you’ll leave your riding buddies or racing competitors trailing behind. In addition to its monocoque carbon fibre frame, it’s kitted out with Fox Factory suspension front and rear, Shimano XT 12-speed gears and powerful Shimano XT 4-Pot disc brakes.From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at.Frame Construction:To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise-free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size.Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”?Adjustable Geometry:All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”.Trail - As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents.Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities.Suspension Design:To ensure the bike could climb as well as it descends, Nukeproof designed the 4 bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride.Features: Frame: Nukeproof Reactor 290 Carbon, 130mm Travel, UD woven Carbon Fibre frame, internal cable routing, ISCG 05 mounts, Enduro bearings, Threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection Fork: Fox 36 Float, Factory Series, Kashima, Grip 2 Damper, 150mm, 44mm Offset, BOOST, Orange Shock: Fox Float X, Factory Series, Kashima, 2 Position, EVOL LV, Custom CM+, RM, Rezi LM tune, 210x50mm, Bearing End, 1x 0.2 spacer fitted. Front Wheel: DT Swiss XM1700 SPLINE 30,29", 6 Bolt, 110x15mm Rear Wheel: DT Swiss XM1700 SPLINE 30, 29", 6 Bolt, Shimano Microspline Driver, 148x12mm Tyres: Front: Maxxis Assegai 29x2.5" WT 3C MaxxTerra/EXO+/TR, Rear: Maxxis Dissector 29x2.4" WT 3C MaxxTerra/EXO+/TR Crankset: Shimano XT M8100 12-Speed, Hollowtech 2, 170mm, 30T, 52mm Chainline Shifter: Shimano XT M8100-R, 12-speed Rapidfire Plus, I-Spec EV Rear Derailleur: Shimano XT M8100, SGS 12-Speed, Shadow Plus Chain: Shimano XT M8100 HG 12-speed Inc Quicklink Cassette: Shimano XT M8100-12, 12-Speed (HYPERGLIDE+), 10-51T Brakes: Shimano XT M8120, 4 Pot Brake, Metallic Pads Front Rotor: Brakco, 203mm Rear Rotor: Brakco, 180mm Handlebars: Nukeproof Horizon V2 25mm Rise, Width - M780mm, L800mm, XL800mm Stem: Nukeproof Horizon, 45mm, Black Saddle: Nukeproof, Black Seatpost: Bikeyoke Divine Stealth with Brand-X Remote lever, M:160mm drop; L/XL:185mm drop Headset: Nukeproof, 44-56 IIT Grips: Nukeproof Sam Hill Signature Weight: 14.19Kg (Medium, Tubeless)Please Note: Due to severe delays in the bicycle supply chain, Nukeproof has been forced to make some alterations to the specification of the component parts supplied with this bicycle. As a result, the specification may differ from those shown in the images. Please refer to the specification table above for accurate information.Key Specifications: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 150mm Axle to Crown: 557mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CSTechnologies: Flip Chip Adjustable Suspension Geometry: All models of the Reactor feature a "flip-chip", so that the bike geometry can be easily adjusted from "Trail" to "Rail" mode without having to custom tune your suspension setup. The Trail setting is best suited for pumping and carving your rhythm and style into the mountainside and still caters for rides who love the climb as much as the descent. On the other hand, the Rail setting turns the Reactor into an adrenaline-fuelled gravity tamer. Dropping the bottom bracket height by 6mm and slackening the head angle by half a degree, these changes give this Reactor greater stability and control when the trail leans downhill towards vertical Nukeproof 4-Bar Horst Linkage Suspension Design: Ensuring the bike can climb as well as it descends, Nukeproof focussed on fine-tuning their 4-Bar Horst linkage suspension setup to give higher levels of anti-squat performance when higher up the cassette in the climbing gears, but also to deliver greater trail-gobbling performance when you drop down the cassette and begin descending the mountain. This means that the bike behaves itself on the climbs and grips with unprecedented traction and efficiency when making your way back towards sea-level. When you get it up to speed and drop a few gears to carry momentum, this bike turns into a trail hooligan and helps you carve the trail with style. The combination of low anti-squat and progressive suspension-rate give it the ultimate in small bump compliance (removes rough trail and root chatter) with good mid-stroke support for cornering/pumping and end stroke progression for aggressive riding. With balanced anti-rise suspension performance, the Reactor provides some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure stability and traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any rideEasy AssemblyWhen you order a bike, one of our trained mechanics will carefully prepare and pack your bike for shipping. Upon delivery, the assembly is simple and all necessary tools are conveniently included in the box.Depending on the delivery service and destination, bikes will either be delivered in a large or a small box. Below is a guide as to how your bike will arrive: All bikes for delivery within the UK and Republic of Ireland will be delivered in a large box, except for kids’ bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for delivery within the EU on a standard service will be delivered in a large box. If an express delivery option is chosen, your bike will be packed into a small box. Again, the exception is kids’ bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for worldwide delivery outside the EU will be delivered in small boxes.This video demonstrates assembly from a SMALL BOX.This video demonstrates assembly from a LARGE BOX.Buy Nukeproof Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Tech 3 X2 Brake (No Rotor)The superb Hope Tech 3 X2 Brake (No Rotor) is specifically designed to enhance the functional design and integration of your MTB (mountain bike) brake set-up.Adjustable MTB Disc BrakeThis MTB Disc Brake features a piston that's actuated by a cam and a roller system to eliminate any free play and initial friction. Additionally, its classic split clamp design makes the master cylinder easy to install on your handlebars without having to remove anything else. Finally, it's directly compatible with any Shimano I-Spec type shifter, so there's no need for an additional mount to attach the shifter to the master cylinder. Please Note: This model does not include rotors.Features:Material: CNC Machined 2014 T6 Aluminium'On the fly' BPC (bite point control) and Reach adjustmentDirect compatibility with Shimano I-Spec shifterDirect mount available for SRAM shifters5% power increase over TECH Evo master cylinderHanded master cylinders for better integration on the handlebarsUpdated piston dust cover designUpdated reservoir diaphragm design9.74 caliper with all mount optionsWide-angle hose connector mountTop entry pad fittingFixed or floating rotorBlack braided hoseA drip-free bleed nipple and wide-angle orientation of the fluid inlet connector have also been added, allowing for neater hose routing and cleaner servicing.Weight: from 340g (approx)Buy Hope Components & Wheels from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Tech 3 Disc Brake Master Cylinder PistonThis top-quality model is a genuine Hope replacement part for your Tech 3 hydraulic disc brakes. Additionally, it's ideal for replacing your old or worn-out existing model for fast and precise stopping power and control.Features: Material: CNC-machined Aluminium Sealed fluid housing Made in Britain Genuine Hope replacement partBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Disc Brake Hose ConnectorComplete cable end fitting kit for connecting a Hope Brake lever to the Hose at a 90 degree angle, contains all parts required for one connection. Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Disc Brake Hose ConnectorComplete cable end fitting kit for connecting a Hope Brake lever to the Hose at a 90 degree angle, contains all parts required for one connection. Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Tech Master Cylinder Lid Genuine Hope replacement parts Hope Tech Master Cylinder Lid Features: Tech Master Cylinder Lid Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Tektro R315 Brake CalipersBenefitting from aluminium arms, these caliper brakes are designed to deliver excellent strength and durability wherever your next road adventure takes you. Tektro has also put these through a melt-forging process for additional robustness on demanding road conditions. As a result, they're more than capable of handling all of the demands associated with long days on the road.Dual Pivot Caliper BrakesFeaturing a dual-pivot design, these brakes use their two pivot points to offer better braking as well as increased power and control. Providing a firm and instantaneous braking response, these also ensure a longer service life. Coming complete with P473 adjustable angle pads, these brakes allow you to enjoy improved durability as well as high-response braking over longer periods on your road journey.Features: Arms Material: Melt Forged Aluminium Use: Road Type: Dual Pivot Caliper brakes Pads: P473 adjustable angle pads Quick Release Mechanism: Yes Dimension: 41-57mm Single or Pair: Pair Weight: 193g (each)Manufacturer's Part Number: R315 Black PairBuy Tektro Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Tektro RL720 CX Brake LeversTop mount ergonomic lever design for the use with caliper or cantilever brakes Features: Forged aluminium lever and bracket Hinged bracket Clamp size - 24mm, 26mm or 31.8mm Reach adjustment and return spring Finish - Black or Silver Weight - 90g/pair Buy Tektro Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Transfil Black Snake PTFE Brake CableFeaturing a high-quality PTFE build for excellent resistance on your ride, this replacement brake cable is perfect for when it's time to service your brakes. Transfil has also kitted out this model with a Teflon coating that's waterproof and has anti-friction properties for smooth performance. Suitable for both road bikes and mountain bikes, this cable is easy to fit, maintenance-free and does not fray. Features: Material: Polytetrafluoroethylene (PTFE) Finish: Teflon coated Use: Road, Mountain Bike (MTB) Type: Brake Cable Size: 2000mm ANTI friction Easy to fit Maintenance-free Does not fray WaterproofManufacturer's Part Number: KB30 Black 2mBuy Transfil Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Brake Hose KitThis brake hose kit is a replacement kit for road and mountain bike (MTB) hydraulic disc brakes. Choose the kit you require depending on the brake that you have. All hoses are constructed from a high tenacity braided yarn.There are several options to choose from the menu for this brake hose kit. Please see the below details for more information on each kit:Spec 1- Shimano Straight- Straight Kit- road bikes and entry level MTB with Shimano brakes. 3M x Black Hose- ID=2.1mm/ OD= 5mm 2 x M9 Flange Nuts (for road lever) 2 x M8x0.75 Stainless Nuts (MTB lever end or Road caliper end) 2 x M8x0.75 Forged Nuts 4 x Stainless Inserts 4 x Copper OliveSpec 2- Shimano Straight- 90 Degree Kit- regular MTB bikes with Shimano brakes. 1.8M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 2 x Stainless Inserts 2 x Copper OliveSpec 3- Avid/SRAM Straight- 90 Degree Kit- Fitment for SRAM Guide Ultimate fitment and Level (remove banjos) 1.8M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 4 x Stainless Inserts 4 x Alloy Threaded OlivesSpec 4- Avid/SRAM Straight- Straight Kit- Fitment for SRAM Guide R, RS, RSC 1.8M x Black Hose with M6 male adapter pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with male adapter pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 4 x Stainless Inserts 4 x Alloy Threaded OlivesSpec 5- Avid/SRAM Straight- 90 Deg Kit MONOBLOCK- Fitment for SRAM Code, Red & Force 1.8M x Black Hose with monoblock banjo pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with monoblock banjo pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 2 x Stainless Inserts 2 x Alloy Threaded OlivesSpec 6- Tektro Straight- Straight Kit 1.8M x Black Hose with banjo pre-assembled- ID=2.5mm/ OD= 5.5mm 1M x Black Hose with banjo pre-assembled- ID=2.5mm/ OD= 5.5mm 2 x M8x0.75 Forged Nuts 2 x Copper Inserts 2 x Copper OlivesFeatures: Type: Replacement Brake Hose Kit for hydraulic brakes All hoses are constructed from a high tenacity braided yarnBuy LifeLine Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Brake Hose KitThis brake hose kit is a replacement kit for road and mountain bike (MTB) hydraulic disc brakes. Choose the kit you require depending on the brake that you have. All hoses are constructed from a high tenacity braided yarn.There are several options to choose from the menu for this brake hose kit. Please see the below details for more information on each kit:Spec 1- Shimano Straight- Straight Kit- road bikes and entry level MTB with Shimano brakes. 3M x Black Hose- ID=2.1mm/ OD= 5mm 2 x M9 Flange Nuts (for road lever) 2 x M8x0.75 Stainless Nuts (MTB lever end or Road caliper end) 2 x M8x0.75 Forged Nuts 4 x Stainless Inserts 4 x Copper OliveSpec 2- Shimano Straight- 90 Degree Kit- regular MTB bikes with Shimano brakes. 1.8M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 2 x Stainless Inserts 2 x Copper OliveSpec 3- Avid/SRAM Straight- 90 Degree Kit- Fitment for SRAM Guide Ultimate fitment and Level (remove banjos) 1.8M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 4 x Stainless Inserts 4 x Alloy Threaded OlivesSpec 4- Avid/SRAM Straight- Straight Kit- Fitment for SRAM Guide R, RS, RSC 1.8M x Black Hose with M6 male adapter pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with male adapter pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 4 x Stainless Inserts 4 x Alloy Threaded OlivesSpec 5- Avid/SRAM Straight- 90 Deg Kit MONOBLOCK- Fitment for SRAM Code, Red & Force 1.8M x Black Hose with monoblock banjo pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with monoblock banjo pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 2 x Stainless Inserts 2 x Alloy Threaded OlivesSpec 6- Tektro Straight- Straight Kit 1.8M x Black Hose with banjo pre-assembled- ID=2.5mm/ OD= 5.5mm 1M x Black Hose with banjo pre-assembled- ID=2.5mm/ OD= 5.5mm 2 x M8x0.75 Forged Nuts 2 x Copper Inserts 2 x Copper OlivesFeatures: Type: Replacement Brake Hose Kit for hydraulic brakes All hoses are constructed from a high tenacity braided yarnBuy LifeLine Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Brake Hose KitThis brake hose kit is a replacement kit for road and mountain bike (MTB) hydraulic disc brakes. Choose the kit you require depending on the brake that you have. All hoses are constructed from a high tenacity braided yarn.There are several options to choose from the menu for this brake hose kit. Please see the below details for more information on each kit:Spec 1- Shimano Straight- Straight Kit- road bikes and entry level MTB with Shimano brakes. 3M x Black Hose- ID=2.1mm/ OD= 5mm 2 x M9 Flange Nuts (for road lever) 2 x M8x0.75 Stainless Nuts (MTB lever end or Road caliper end) 2 x M8x0.75 Forged Nuts 4 x Stainless Inserts 4 x Copper OliveSpec 2- Shimano Straight- 90 Degree Kit- regular MTB bikes with Shimano brakes. 1.8M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 2 x Stainless Inserts 2 x Copper OliveSpec 3- Avid/SRAM Straight- 90 Degree Kit- Fitment for SRAM Guide Ultimate fitment and Level (remove banjos) 1.8M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 4 x Stainless Inserts 4 x Alloy Threaded OlivesSpec 4- Avid/SRAM Straight- Straight Kit- Fitment for SRAM Guide R, RS, RSC 1.8M x Black Hose with M6 male adapter pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with male adapter pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 4 x Stainless Inserts 4 x Alloy Threaded OlivesSpec 5- Avid/SRAM Straight- 90 Deg Kit MONOBLOCK- Fitment for SRAM Code, Red & Force 1.8M x Black Hose with monoblock banjo pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with monoblock banjo pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 2 x Stainless Inserts 2 x Alloy Threaded OlivesSpec 6- Tektro Straight- Straight Kit 1.8M x Black Hose with banjo pre-assembled- ID=2.5mm/ OD= 5.5mm 1M x Black Hose with banjo pre-assembled- ID=2.5mm/ OD= 5.5mm 2 x M8x0.75 Forged Nuts 2 x Copper Inserts 2 x Copper OlivesFeatures: Type: Replacement Brake Hose Kit for hydraulic brakes All hoses are constructed from a high tenacity braided yarnBuy LifeLine Components from Chain Reaction Cycles, the World's Largest Online Bike Store.