Hand built right here at Sourcebmx. One of the highest spec custom wheels we offer this wheel uses the Profile tried and tested Mini Cassette hub laced into the super strong Cinema 888 rim. This wheel is laced together using high quality straight gauge stainless spokes. ###section### Product Specs WHEEL SIZE:20" HUB:Profile Mini Cassette AXLE:14mm Male DRIVE SIDE:Right Side Drive RIM:Cinema 888 SPOKES:Straight Gauge NIPPLES:Brass WEIGHT:1270g / 2.79lbs
Ultra-thin wall chromoly tubular arms that offer superior stiffness for smaller racers. Each chromoly Mini Crankarm weighs less than a solid aluminium arm of equal length. Titanium Gun Drilled Hollow (GDH) axle with chromo GDH axle bolts. Titanium GDH axle bolt upgrade available. Ti Sprocket Bolt is INCLUDED. ###section### Product Specs Type:3 pc Spindle Diameter:19mm Includes BB Bearings:No Weight:18.41 oz - 19.15 oz ###shogun-image-section###
Hand built right here at Sourcebmx. This custom rear BMX wheel uses the tried and tested Profile Mini cassette hub in polished laced into a BSD NASA rim using high quality double butted rainbow spokes. NOTE: Please confirm the size of your driver at Checkout. Titanium driver and axle upgrades also available at checkout.###section### Product Specs WHEEL SIZE: 20" HUB: Profile Mini Cassette Hub AXLE: 14mm Male DRIVE SIDE: Right Side Drive RIM: BSD NASA Rim SPOKES: Double Butted Rainbow NIPPLES: Brass WEIGHT:
Hand built right here at Sourcebmx. This custom rear BMX wheel uses the tried and tested Profile Mini cassette hub in polished laced into a BSD NASA rim using high quality double butted rainbow spokes. NOTE: Please confirm the size of your driver at Checkout. Titanium driver and axle upgrades also available at checkout.###section### Product Specs WHEEL SIZE: 20" HUB: Profile Mini Cassette Hub AXLE: 14mm Male DRIVE SIDE: Left Side Drive RIM: BSD NASA Rim SPOKES: Double Butted Rainbow NIPPLES: Brass WEIGHT:
Overview “AC-2” = Dual Angular Contact. This describes the use of both angular contact bearings&and&angled bearing cups/hub bores used in the hub design. The AC-2 hub features revolutionary bearing installation and function never seen before in a bicycle hub. It has been designed from the ground up for ease of maintenance and optimal bearing performance. The AC-2 Cassette Hub also offers changeable pawl/spring configurations for varying points of driver engagement to suit a rider’s personal preference. Here are a few key points of the AC-2 BMX Cassette Hub: -The AC-2 hubs use 20mm Angular Contact bearings with a wave spring pre-load. Bearings are pressed into tapered cups that mate with the angled bores machined into the hub shell. This design feature allows bearing/cup to be easily installed and removed from hub shell&without&any special tools. No more presses or hammers needed! Another attribute of the tapered bearing cup/angled hub shell bore design is how the bearings seat in the hub. The bearings/cups on each side of the hub shell are in&perfect&alignment with each other! This ensures superior bearing performance and less chance of premature wear. -Hub shell and driver literally “float” on the axle. The only force on the bearings is supplied by the wave spring(which delivers the appropriate bearing pre-load needed for angular contact bearings). Tightening of axle bolts has absolutely no affect on the bearings! -The bearings, wave spring, and shim(s) are secured on the axle by one retaining ring. The only tool used to assemble/disassemble the AC-2 hub is a pair of snap ring pliers! -The AC-2 hub cassette driver is also unique. It allows for changeable P.O.E.(points of engagement). The hub driver comes standard with 6 pawls and springs. This option offers 96 P.O.E. -Maximum engagement. The other choice is to use just 3 pawls and springs. P.O.E. is reduced to 48 and minimal drag is achieved. This is a rider preference choice and both have a unique sound! -The proprietary Profile Racing 10 spline aluminum cassette body allows you to use Profile's standard steel, Elite, or aluminum cogs ranging from 12t to 18t. ###section### Product Specs HUB TYPE:&Cassette AXLE:&Female Bolts DRIVER:&Choose In Basket SPOKE HOLES:&36h WEIGHT:&370g / 13.05oz
Available with a huge choice of 14mm female bolts or 10mm bolts with drivers from 9t through to 18t! - Select your drive side and Colour and then select your driver option and bolts at the Checkout!. Titanium Upgrades also available. Hand Made in the USA! The Elite is a high spec, lightweight hub made to the highest standards possible in Florida, USA. The Elite cassette features Profile's Ultra driver which includes six pawls and springs creating 204 points of engagement which means instant engagement and a really loud buzz! The Elite hub features a heat treated Aluminium Shell and centre axle and is available with a choice of 10mm or 14mm female bolts (Titanium axle upgrade available at checkout). The hub spins on over-sized abec 5 bearings for less resistance and the heat treated colour matched cone spacers and a engraved Profile Logos finish off the hub. Finished with an ultra deep anodised finished. ###section### Product Specs HUB TYPE:Cassette AXLE:Female Bolts DRIVER:Choose In Basket SPOKE HOLES:36h WEIGHT:443g / 15.6oz
Sold standard with a 14mm Hollow Male Axle (You can Upgrade to Titanium at Checkout) Drivers from 9t through to 18t! - Select your drive side and Colour and then select your driver option at checkout. Titanium Upgrades also available. Hand Made in the USA! The Elite is a high spec, lightweight hub made to the highest standards possible in Florida, USA. The Elite cassette features Profile's Ultra driver which includes six pawls and springs creating 204 points of engagement which means instant engagement and a really loud buzz! The Elite hub features a heat treated Aluminium Shell with a Hollow 14mm Crmo Axle as standard (Titanium axle upgrade available at checkout). The hub spins on over-sized abec 5 bearings for less resistance and the heat treated colour matched cone spacers and a engraved Profile Logos finish off the hub. Finished with an ultra deep anodised finished. ###section### Product Specs HUB TYPE:Cassette AXLE:14mm Male DRIVER:Choose In Basket SPOKE HOLES:36h WEIGHT:509g / 17.95oz
Available with a huge choice of 14mm female bolts or 10mm bolts with drivers from 9t through to 18t! - Select your drive side and Colour and then select your driver option and bolts at the Checkout!. Titanium Upgrades also available. Hand Made in the USA! The Elite is a high spec, lightweight hub made to the highest standards possible in Florida, USA. The Elite cassette features Profile's Ultra driver which includes six pawls and springs creating 204 points of engagement which means instant engagement and a really loud buzz! The Elite hub features a heat treated Aluminium Shell and centre axle and is available with a choice of 10mm or 14mm female bolts (Titanium axle upgrade available at checkout). The hub spins on over-sized abec 5 bearings for less resistance and the heat treated colour matched cone spacers and a engraved Profile Logos finish off the hub. Finished with an ultra deep anodised finished. ###section### Product Specs HUB TYPE:Cassette AXLE:Female Bolts DRIVER:Choose In Basket SPOKE HOLES:36h WEIGHT:443g / 15.6oz
Sold standard with a 14mm Hollow Male Axle (You can Upgrade to Titanium at Checkout) Drivers from 9t through to 18t! - Select your drive side and Colour and then select your driver option at checkout. Titanium Upgrades also available. Hand Made in the USA! The Elite is a high spec, lightweight hub made to the highest standards possible in Florida, USA. The Elite cassette features Profile's Ultra driver which includes six pawls and springs creating 204 points of engagement which means instant engagement and a really loud buzz! The Elite hub features a heat treated Aluminium Shell with a Hollow 14mm Crmo Axle as standard (Titanium axle upgrade available at checkout). The hub spins on over-sized abec 5 bearings for less resistance and the heat treated colour matched cone spacers and a engraved Profile Logos finish off the hub. Finished with an ultra deep anodised finished. ###section### Product Specs HUB TYPE:Cassette AXLE:14mm Male DRIVER:Choose In Basket SPOKE HOLES:36h WEIGHT:509g / 17.95oz
Sold standard with a 14mm Hollow Male Axle (You can Upgrade to Titanium at Checkout) anx a 9t Driver! - Select your drive side and Colour and then select your Slack ring at checkout. Titanium axle and driver Upgrades also available at checkout . Hand Made in the USA! The Z-coaster has been designed from the ground up by Profile to be the most versatile and reliable Freecoaster hub. The hub can be used as either a Freecoaster or regular cassette hub bu simply switching the Slack-Cam ring inside the hub. The Shell is machined from 6061 aluminium and features a hollow 14mm Crmo Axle (Titanium upgrades available at Checkout). The Z coaster features a unique Driver which uses Z shape pawls which allows for adjustment from 1/8 of a crank to 1/3 of a crank by changing the Slack Cam ring. The driver is also supported from the outside by a huge bearing making this hub ultra reliable and maintenance free. Finished in super deep anodised colours. ###section### Product Specs HUB TYPE:Cassette / Coaster Switchable AXLE:14mm Male DRIVER:Choose In Basket SPOKE HOLES:36h WEIGHT:583g / 20.55oz
Available with a huge choice of 14mm female bolts or 10mm bolts with a 9t driver - Select your drive side and Colour and then select your Slack ring and bolts at the Checkout!. Titanium driver Upgrades also available at checkout! Hand Made in the USA! The Z-coaster has been designed from the ground up by Profile to be the most versatile and reliable Freecoaster hub. The hub can be used as either a Freecoaster or regular cassette hub bu simply switching the Slack-Cam ring inside the hub. The Shell is machined from 6061 aluminium and features a Crmo centre female axle with choice of 10mm or 14mm bolts (Titanium upgrades available at Checkout). The Z coaster features a unique Driver which uses Z shape pawls which allows for adjustment from 1/8 of a crank to 1/3 of a crank by changing the Slack Cam ring. The driver is also supported from the outside by a huge bearing making this hub ultra reliable and maintenance free. Finished in super deep anodised colours. ###section### Product Specs HUB TYPE:Cassette / Coaster Switchable AXLE:Female Bolts DRIVER:Choose In Basket SPOKE HOLES:36h WEIGHT:559g / 19.7oz
Sold standard with a 14mm Hollow Male Axle (You can Upgrade to Titanium at Checkout) anx a 9t Driver! - Select your drive side and Colour and then select your Slack ring at checkout. Titanium axle and driver Upgrades also available at checkout . Hand Made in the USA! The Z-coaster has been designed from the ground up by Profile to be the most versatile and reliable Freecoaster hub. The hub can be used as either a Freecoaster or regular cassette hub bu simply switching the Slack-Cam ring inside the hub. The Shell is machined from 6061 aluminium and features a hollow 14mm Crmo Axle (Titanium upgrades available at Checkout). The Z coaster features a unique Driver which uses Z shape pawls which allows for adjustment from 1/8 of a crank to 1/3 of a crank by changing the Slack Cam ring. The driver is also supported from the outside by a huge bearing making this hub ultra reliable and maintenance free. Finished in super deep anodised colours. ###section### Product Specs HUB TYPE:Cassette / Coaster Switchable AXLE:14mm Male DRIVER:Choose In Basket SPOKE HOLES:36h WEIGHT:583g / 20.55oz