FEEL THE NEW X-PERIENCE LOOK constant desire to innovate and improve your product experience has resulted in a design that is dependable, durable and easy to use. Our new mountain-bike pedal was constructed around a heavy-duty mechanism, is resistant to the negative effects of coming into contact with various external factors (rocks, roots, mud…), and provides consistent and reliable performance over time. Its spindle, equipped with a double weather-resistant seal, has been improved to withstand even the worst conditions you may encounter during your rides. We have remained devoted to the principles that guide us daily. Fewer hassles mean more time to ride, and therefore, more fun. TECHNOLOGY THE BEST POWER TO WEIGHT RATIO All the energy you produce is transferred to your MTB through your pedals. Their role, is therefore, crucial. LOOK’s objective in this new undertaking was to find solutions that would enable the most efficient transfer of rider power possible. That is why LOOK has chosen to place the weight/contact surface ratio as the primary factor when defining the product. Generally speaking, the greater the contact surface, the more efficiently energy is transferred. On the other hand, the greater the contact surface, the more the pedal will weigh. The challenge faced by our engineers was therefore, to identify the zones that are useful for energy transmission and then optimize the pedal design in order to limit any that are unused. This task allowed LOOK to engineer a pedal with the best weight / contact surface ratio on the market. LATERAL CONTACT SUPPORT Lateral contact support guides your foot in finding your pedal and provides you a point of contact even if you have not yet engaged the cleat. This wide contact area prevents your foot from sliding on the pedal body and offers consistent and reassuring support. MECHANISM GEOMETRY The mechanism works regardless of external conditions (in the mud, forces are significantly different from those encountered when dry), more space allows for the shedding of various foreign matter (mud, sand…). These zones give the user a constant and stable feeling of being securely clipped in, in all conditions. ADJUSTABLE TENSION An adjustable tension screw allows you to fine-tune the entry/release resistance to your personal skill level. Specifications: USE: XC Competition and Leisure TENSION: 6 to 14 BODY: Carbon SPINDLE: Titanium FLOAT: 6° PLATFORM MATERIAL: Chromoly PLATFORM AREA: 515 mm² PLATFORM WIDTH: 60 mm STACK HEIGHT + CLEATS: 16,8 mm WEIGHT PEDAL: 150 gr WEIGHT PAIR + CLEATS: 404 gr GUARANTY: 2 years
Ride fast and enjoy total and confident control with the Gravita Tensor Clip MTB Shoes. Fizik's engineers have created a shoe that offers that perfect balance of protection, durability and a precise fit that is sorely lacking in many downhill and enduro MTB shoes. X6 Outsole. Clip in and Stay in Control. The heart of the Tensor Clip shoe is the X6 Outsole. It's this that keeps you confidently on the pedals and is crucial for reacting quickly, aggressively and nimbly to changing terrain and trail features. For the clipped version of the Gravita Tensor, Fizik has utilised a Vibram XS EVO tread compound. This isn't quite as sticky as that found on the flat-pedal shoe but makes for a smoother engagement and disengagement from clip-in pedals. The rubber compound is formed into a zonal lug pattern. Low profile mid-foot tread offers an optimal mechanical interface with pedal bodies, keeping you planted even if you don't immediately find your clip in point. Meanwhile, the heel and toes feature a deeper tread for greater traction when hiking back up the hill. Flex is also tuned for the clip-in rider. The stiffness gets a boost, rated 5 out of 10 on the Fizik stiffness scale, optimising power transfer and improving pedalling efficiency. Precision Fit Downhill and enduro racing is all about shorter more intense efforts. Sprinting from the start gate, pushing hard into berms and lung-busting racing to the finish line. And it's the precise fit of the Gravita Tensor that supports your foot during those efforts. No power wasted. The ergonomically designed lace pattern creates an even tension across the foot and makes for easy adjustment to how you like your shoes to feel. Stability is also enhanced via Fizik's Powerstrap. Sitting over the instep, it stabilises the plantar arch and locks your heel in place. It also doubles as a lace lock. Durable and Protective While rowdy mountain bike riding demands a tough shoe, Fizik didn't want to add unnecessary bulk or weight to the Tensor. The solution was to use a slim silhouette and utilise rip-stop fabrics that are very tough and yet remarkably light in weight. The rip-stop upper is also complemented by an injection-moulded TPU armoured toe-box to ward off rocks and roots - just what you need when you're foot out and flat out. Laminated scuff-guards also protect in high wear areas. Lastly, when riding aggressively you're constantly moving and it's easy to hit your ankle to cranks and swingarms. Here the raised inner ankle pad takes the sting out of those impacts, while not affecting your ankle mobility. Cleat Guidance These MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.
The ultimate pedal for enduro racing and riding.The mallet E was developed with the help some well known enduro athletes. 12% smaller than the Mallet DH pedals but with many of its well loved features. There are 2 different axle lengths available 52mm or 57mm (the 57mm pedal is only available in a half black/half blue colour option). The 52mm will provide an engagement point and Q factor similar to other brands of pedals. If you have been previously using the Mallet DH pedal you may benefit from using the longer axle version. Riders who prefer a wider Q factor / have less crankarm / pedal clearance may also benefit from the longer axle pedals. Available in black or blue colour options with the standard 52mm axle or half black / half blue with the longer 57mm axle. Concave pedal platform for secure foothold. Like it’s DH equivalent you get that flat pedal feel whilst running clipless. 49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. Ribbed body allows for better traction when unclipped Chamfered edges for reduction in rock strikes Excellent mud-shedding: the design is very open. 4-sided entry: clip in on all 4 sides of the pedal by pushing forward or pulling backwards on the pedal. Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these). Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box. Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models which allows for ease of servicing this is easily done using the pedal refresh kit (CRB-16051). Mallet E Weight (per pair) 419g Spindle Forged scm 435 chromoly steel Body 6061-T6 aluminium Wings 17-4PH stainless Spring 300 series stainless steel inner bearing Igus LL-glide bearing outer bearing Enduro cartridge bearing Pins 12 pins per pedal Cleats premium brass cleats included release angle 15° or 20° Warranty 5 years
The design for the original crankbrothers pedal began out of frustration. The founders of crankbrothers Carl and Frank were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated…. It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The candy 7 pedal is a clipless pedal with a platform offering improved stability across a wide range of disciplines from all mountain / trail to cyclo-cross. The pedal body is 10% larger than the level 1 2 and 3 pedal bodies. The chamfered edges help to minimise rock strikes. There is an ongoing debate amongst many riders about which is best candy or eggbeater. The candy pedal provides an additional platform which is confidence inspiring and also gives some support or those moments when you’ve unclipped but are unsure if you need to get your foot down for a dab jump off the bike or quickly get clipped in again and put the power down. Excellent mud-shedding: the design is very open. Ribbed body for extra traction when unclipped 4-sided entry: clip in on all 4 sides of the pedal by pushing forward or pulling backwards on the pedal. Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these). Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box. Chamfered edges help reduce rock strikes Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models which allows for ease of servicing this is easily done using the pedal refresh kit (CRB-16051). candy 7 Weight (per pair) 320g Spindle Forged scm 435 chromoly steel Body 6061-T6 aluminium Wings 17-4PH stainless Spring 300 series stainless steel inner bearing Igus LL-glide bearing outer bearing Enduro cartridge bearing Cleats premium brass cleats included release angle 15° or 20° Warranty 5 years
The ultimate pedal for enduro racing and riding. The mallet E was developed with the help some well known enduro athletes. 12% smaller than the Mallet DH pedals but with many of its well loved features. There are 2 different axle lengths available 52mm or 57mm (the 57mm pedal is only available in a half black/half blue colour option). The 52mm will provide an engagement point and Q factor similar to other brands of pedals. If you have been previously using the Mallet DH pedal you may benefit from using the longer axle version. Riders who prefer a wider Q factor / have less crankarm / pedal clearance may also benefit from the longer axle pedals. Concave pedal platform for secure foothold. Like it’s DH equivalent you get that flat pedal feel whilst running clipless. 49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. Ribbed body allows for better traction when unclipped Chamfered edges for reduction in rock strikes Excellent mud-shedding: the design is very open. 4-sided entry: clip in on all 4 sides of the pedal by pushing forward or pulling backwards on the pedal. Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these). Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box. Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models which allows for ease of servicing this is easily done using the pedal refresh kit (CRB-16051). Specification Weight (per pair): 419g Spindle: Forged scm 435 chromoly steel Body: 6061-T6 aluminium Wings: 17-4PH stainless Spring: 300 series stainless steel Inner bearing: Igus LL-glide bearing Outer bearing: Enduro cartridge bearing Pins: 12 pins per pedal Cleats: Premium brass cleats included Release angle: 15° or 20° Warranty: 5 years
The flat pedal from crankbrothers is engineered to provide the optimal interface between shoe and pedal. The 13mm external and 11mm internal thickness on the level 7 stamp provide a low profile concave pedal body that your feet sit into. Adjustable pins allow the rider to fine tune the feel. The outsole profiles of the top mountain bike show brands were analysed and the data used to create two distinct surface areas to optimise shoe/pedal contact across all of these different models. The small is designed for EU shoe sizes from 37-43 and 43-49 for large. Once the optimal sizes had been established the features required for the ideal flat pedal were also incorporated. Concave pedal platform so that your shoe feels like it sits into the pedal and feels connected. 13mm external and 11mm internal thickness. 20 adjustable pins per pedal. 8mm in the centre of the pedal and 10mm on the outer edges. Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Small: 100mm x 100mm pedal body footprint Large: 114mm x 111mm pedal body footprint Available in red or black Specification Weight: 345g (Small) 375g (Large) Spindle: Forged scm 435 chromoly steel Body: Forged 6061-T6 Inner bearing: Igus LL-glide bearing Outer bearing: Igus LL-glide bearing Body dimensions: 100mm x 100mm (Small) 114mm x 111m (Large) Pins: 10 adjustable pins per side Warranty: 5 years
The world’s most successful downhill / race pedal just got even better! Dual-chamfered edges reduce costly rock strikes and combined with proven traction pad technology Mallet DH maximises your performance. Mallet pedals feature a double sided open design allowing for quick and reliable engagement with minimal mud clogging. A two piece body keeps the weight down whilst providing a strong and durable platform. Mallet DH are the clipless pedal of choice by most Pro World Cup riders. The ability to set the release angle of the cleats to either 15° to 20° means you can be really active on the pedal whilst still remaining attached to the bike. The concave pedal body gives a flat pedal feel with the assurance that you are connected to the bike. Release angle: 15° to 20° Cleat: Premium brass cleats included Warranty: 5 years Weight: 479g per pair Platform: Extruded/machined aluminium Wings: cast stainless steel Spring: 300 series spring stainless steel Spindle: Forged scm435 chromoly steel Q-factor: 57mm Inner bearing: igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails Outer bearing: enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials grease and sealing on their bearings which are designed especially for use on a bike Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal Traction pins: 8mm adjustable Excellent mud-shedding: using the very open designed pedal platform Dual chamfered edges to reduce rock strikes Ribbed body for extra traction when unclipped 4-sided entry: clip in on all 4 sides of the pedal by pushing forward or pulling backwards on the pedal Extremely lightweight: pedal design is very simple with only a few key parts Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models which allows for ease of servicing this is easily done using the pedal refresh kit (CRB-16051). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle
The flat pedal from crankbrothers is engineered to provide the optimal interface between shoe and pedal. The 13mm external and 11mm internal thickness on the level 7 stamp provide a low profile concave pedal body that your feet sit into. Adjustable pins allow the rider to fine tune the feel. The outsole profiles of the top mountain bike show brands were analysed and the data used to create two distinct surface areas to optimise shoe/pedal contact across all of these different models. The small is designed for EU shoe sizes from 37-43 and 43-49 for large. Once the optimal sizes had been established the features required for the ideal flat pedal were also incorporated. Concave pedal platform so that your shoe feels like it sits into the pedal and feels connected. 13mm external and 11mm internal thickness. 20 adjustable pins per pedal. 8mm in the centre of the pedal and 10mm on the outer edges. Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Small: 100mm x 100mm pedal body footprint Large: 114mm x 111mm pedal body footprint Available in red or black Specification Weight: 345g (Small) 375g (Large) Spindle: Forged scm 435 chromoly steel Body: Forged 6061-T6 Inner bearing: Igus LL-glide bearing Outer bearing: Igus LL-glide bearing Body dimensions: 100mm x 100mm (Small) 114mm x 111m (Large) Pins: 10 adjustable pins per side Warranty: 5 years
High performance trail-conqueror. All new Flume combines advanced off-road footwear technology with bike-specific performance to offer a trail flat shoe that's designed to outlast the biggest epics. Flume BOA® uses the BOA® Fit System for a fast effortless and precise fit with strong flexible and low-friction textile TX4 Laces. The Cordura® upper is breathable and lightweight but also trail-tough and protective with a stitch-free and fully welded construction. The new adaptable outsole has a supportive pedal contact area featuring our MAX GRIP rubber for a confident connection with the pedal when charging the trail ahead. Compliant reverse hex traction in the toe and heel make easier work when hiking becomes necessary. FEATURES MAX GRIP rubber outsole. Hexagon outsole featuring reverse hex traction pattern on toe and heel for hike able climbs and descents. D3O® High Impact Zone Technology insole absorbs impact and reduces fatigue. BOA® Fit System with flexible low-friction textile TX4 Laces expertly configured for performance. Hook and loop strap for additional forefoot adjustment. Lightweight bonded upper featuring Cordura® mesh for durability and breathability. Anti-bacterial mesh lining controls odor. TPU mud guard to protect against dirt debris and rubbing. TPU toe and heel protection with reinforced anti-abrasion film. Fully gusseted tongue prohibits intake of dirt and debris. EVA midsole for extra cushion and support. Heel pull tab for easy entry.
High performance trail-conqueror. All new Tallac combines advanced off-road footwear technology with bike-specific performance to offer a trail flat shoe that's designed to outlast the biggest epics. Tallac BOA® uses the BOA® Fit System for a fast effortless and precise fit with strong flexible and low-friction textile TX4 Laces. The Cordura® upper is breathable and lightweight but also trail-tough and protective with a stitch-free and fully welded construction. The new adaptable outsole has a supportive pedal contact area featuring our MAX GRIP rubber for a confident connection with the pedal when charging the trail ahead. Compliant reverse hex traction in the toe and heel make easier work when hiking becomes necessary. FEATURES MAX GRIP rubber outsole. Hexagon outsole featuring reverse hex traction pattern on toe and heel for hike able climbs and descents. D3O® High Impact Zone Technology insole absorbs impact and reduces fatigue. BOA® Fit System with flexible low-friction textile TX4 Laces expertly configured for performance. Hook and loop strap for additional forefoot adjustment. Lightweight bonded upper featuring Cordura® mesh for durability and breathability. Anti-bacterial mesh lining controls odor. TPU mud guard to protect against dirt debris and rubbing. TPU toe and heel protection with reinforced anti-abrasion film. Fully gusseted tongue prohibits intake of dirt and debris. EVA midsole for extra cushion and support. Heel pull tab for easy entry.
Performance The concave pedal platform of this model offers a more secure foothold. Like its downhill (DH) equivalent, you get that flat pedal feel whilst running clipless. They're 49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. Ribbed body allows for better traction when unclipped whilst chamfered edges allow a reduction in rock strikes. The open design of the crankbrothers Mallet E also provides excellent mud shedding. Plus, they also boast 4-sided entry, meaning you can clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal. Fit Increased float: 6° of side-to-side rotational play. The float of crankbrothers Mallet E Pedals allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately. Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box. Durability The outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. The double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. Maintenance Crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit. Additional Information: Warranty: 5 years
Engineered for powering you through the roughest of terrain conditions, these DH-orientated pedals are equipped with a fully CNC-machined pedal body construction for maximum strength and durability. Hope has also kitted these out with stainless steel clips and cleats for a strong and secure hold as you charge down the trails. Another benefit is they feature heat-treated and plated chromoly (Cr-Mo) steel axles, making them robust and reliable wherever your next ride takes you. Downhill Clip-In Pedals with Large Platform Size Perfectly suited for the demands of modern downhill mountain bike riding, these pedals boast large platform size with a dual-sided mechanism that's designed for easy pedal entry, secure cleat holding and positive, consistent release functionality. They also have a footplate option on each pedal for maximum shoe/pedal contact. Focusing on increased grip, these have seven replaceable pins per side, which allows you to enjoy excellent stability and control. One final highlight is they run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability. Technologies: - Fully serviceable and re-buildable - Titanium axle upgrades are available separately - Q-Factor – 55mm - Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also allow 2mm of lateral (side to side) float. - Large platform with the option of 7 pins per side or footplates to give maximum contact between the shoe and pedal and to provide the greatest stability. - Pedals run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability. Manufacturer's Part Numbers: PDUGCB Blue PDUGCC Orange PDUGCN Black PDUGCPU Purple PDUGCR Red PDUGCS Silver