Fox Suspension Float DPS Factory Series Rear ShockEngineered for superb off-road performance, the Float DPS Factory Series Rear Shock from Fox Suspension offers excellent shock absorption and control on the toughest rides.This rear MTB shock features a Float DPS damper, which helps you perfect turns without cutting corners. Its DPS dual-piston system also combines exceptional bump compliance with smooth efficiency, so you can conserve your energy for when you need it most. Coming complete with three positions of adjustment, this is a superb upgrade for a more rider-tuned feel. Features: Finish: Genuine Kashima Coat Use: MTB Damper: DPS with three adjustment positions: Open/Medium/Firm modes Air Sleeve: One-piece EVOL LV air sleeve Piston Valve: Dual Piston valve Volume: Multiple options available Shock Actuation: Remote Mount: Trunnion Shock Size/Travel: 185x50mmTechnologies: DPS Damper: DPS damper with three positions - Open, Medium, Firm modes Dual Piston: Dual Piston valve design improves both rebound and compression flow EVOL LV Air Sleeve: Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivityBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
CeramicSpeed OSPW R9100/R8000 CoatedThis Shimano R9100/R8000 specific version of CeramicSpeed’s OSPW system features the same construction as the standard model, but it’s been enhanced to make the most of your power output even further and the increased watt outputs start at 2.4 watts. The ceramic bearings in this model have been coated with a special treatment to further reduce friction and increase protection from wear and tear. A thin coating is also applied to the bearing races, to increase corrosion resistance.Shimano Specific Pulley WheelsBecause of the design of the 9100 series derailleurs, the R&D team at CeramicSpeed tested and concluded that the best performing combination of oversized pulleys for the Shimano 9100 series is a 13-tooth upper and 19-tooth lower pulley. The design of this Shimano-specific OSPW System is very strong and stiff to ensure a high durability factor. In-house tests show that the higher the tooth count, the longer the pulley wheel lasts.Optimum PerformanceThis revolutionary OSPW System is developed, produced and assembled by hand in Denmark. Designed to be a plug-and-play fit, it's the result of an in-depth development process and has been finely tuned to provide optimal performance. Created to answer the need for less friction (as much as 60%), increased speed and a more efficient drivetrain, the OSPW System gives back what other drivetrains take: watts.Features: Material: Cage: Carbon Fibre, Polyamide; Bearings: Polyamide, Steel and Ceramic; Castors: Aluminium Bearings: Ceramic type 607 Pulley Teeth: Top: 13T; Bottom: 19T Speed: 11-SpeedCapacity: 32T Compatibility: Shimano Dura-ace 9100/9150 and Ultegra R8000 rear derailleurs onlyUse: Road, Triathlon, RanndoneurWeight: 57gMaintenance:It’s important that you properly lubricate your bearings to ensure optimal performance and maximum longevity. Add oil to the outside of the bearing seal, so that oil can penetrate the bearing. Do this when you lubricate your chain, or if you have washed your bike or have been riding in wet or muddy conditions.Buy CeramicSpeed Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
CeramicSpeed OSPW R9100/R8000 CoatedThis Shimano R9100/R8000 specific version of CeramicSpeed’s OSPW system features the same construction as the standard model, but it’s been enhanced to make the most of your power output even further and the increased watt outputs start at 2.4 watts. The ceramic bearings in this model have been coated with a special treatment to further reduce friction and increase protection from wear and tear. A thin coating is also applied to the bearing races, to increase corrosion resistance.Shimano Specific Pulley WheelsBecause of the design of the 9100 series derailleurs, the R&D team at CeramicSpeed tested and concluded that the best performing combination of oversized pulleys for the Shimano 9100 series is a 13-tooth upper and 19-tooth lower pulley. The design of this Shimano-specific OSPW System is very strong and stiff to ensure a high durability factor. In-house tests show that the higher the tooth count, the longer the pulley wheel lasts.Optimum PerformanceThis revolutionary OSPW System is developed, produced and assembled by hand in Denmark. Designed to be a plug-and-play fit, it's the result of an in-depth development process and has been finely tuned to provide optimal performance. Created to answer the need for less friction (as much as 60%), increased speed and a more efficient drivetrain, the OSPW System gives back what other drivetrains take: watts.Features: Material: Cage: Carbon Fibre, Polyamide; Bearings: Polyamide, Steel and Ceramic; Castors: Aluminium Bearings: Ceramic type 607 Pulley Teeth: Top: 13T; Bottom: 19T Speed: 11-SpeedCapacity: 32T Compatibility: Shimano Dura-ace 9100/9150 and Ultegra R8000 rear derailleurs onlyUse: Road, Triathlon, RanndoneurWeight: 57gMaintenance:It’s important that you properly lubricate your bearings to ensure optimal performance and maximum longevity. Add oil to the outside of the bearing seal, so that oil can penetrate the bearing. Do this when you lubricate your chain, or if you have washed your bike or have been riding in wet or muddy conditions.Buy CeramicSpeed Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 10 Speed GoatLink Derailleur HangerIf you want to add extra capacity to your Shimano Shadow+ rear mechanism for the ultimate 1x10 speed setup, the Goatlink adaptor is for you. With this carefully machined component installed on your Shimano-equipped mountain bike (MTB), you’ll enjoy better shifting performance and be able to run Wolf Tooth’s Giant Cog (GC) cassette expanders and other brands of larger cassettes.The GoatLink is simply the fastest route to improved wear and long-term shifting performance on wide-range 1x10 drivetrains using the Shimano Shadow+ Rear derailleurs. Made by Lindarets and Wolf Tooth, it re-positions 10-speed Shimano Shadow+ Rear derailleurs to the optimal location when using the GC 40 tooth and GC 42 tooth sprockets.Features: Material: 6061 Aluminium Compatibility: Shimano Shadow+ 10-Speed rear derailleurs (clutch-type only) Included: Stainless Steel bolt Torque: 8-10Nm Speed: 10-Speed Optimised for Wolf Tooth's 40 and 42-tooth GCs and all sizes of Drop-Stop chainrings - but will work with any 11-40T or 11-42T 10-Speed cassette You will never need a longer b-screw with the GoatLink Made in the USA Direct Mount-native frames and SRAM rear derailleurs are not supported Part Numbers: WT10SGLINK Weight: 19g Please Note: Due to variations in derailleur hanger geometry, chainstay length, chainring size, B-screw adjustment, and suspension configuration, individual results will vary slightly.Please Also Note: Compatible Shimano Shadow+ 10-speed rear derailleurs (clutch-type only) that have a Direct Mount link (including spacer, if so equipped) or B-pivot knuckle with a thickness of 7.9-8.1mm. Shimano changed to this sometime in 2013. Very early Shadow+ rear derailleurs have a thinner link and are not compatible. Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 11 Speed GoatLink Derailleur HangerIf you want better shifting performance when running larger cassettes with your Shimano SLX, XT OR XTR 11 speed rear derailleur, then the GoatLink Derailleur Hanger from Wolf Tooth is for you. An ideal addition to your 1x11 drivetrain, it will help your mountain bike (MTB) to deliver the clean shifting and power delivery you need for taking on the most technical sections of the trails.This project began with the desire to run 11 Speed Shimano derailleurs and shifters with SRAM 10-42T XD cassettes. Granted the combination can work without modification - but the performance wasn't quite what Wolf Tooth expected from Shimano and SRAM's finest.When used with a 10-42T cassette, the GoatLink 11 re-positions SLX M7000, XT M8000 and XTR M9000 rear derailleurs such that free chain length between the cassette and the top derailleur pulley is within 1% of what Shimano intended while cassette tooth engagement in the smallest cog is improved by 27%.*Knowing that certain situations call for a range beyond that provided 10-42T or 11-42T cassettes, Wolf Tooth tweaked the GoatLink 11 to also significantly improve Shimano 11 speed rear derailleur performance with extended-range like the Wolf Tooth GCX44 modified 10-44T XX1 or X01 cassette.Features:Material: 6061 AluminiumCompatibility: SLX M700, XT M8000 and XTR M9000 series 11-Speed Shimano rear derailleursSpeed: 11-SpeedIncluded: Stainless Steel boltTorque: 8-10NmMade in the USAOnly mounts to standard derailleur hangersDouble chainrings (2x) are supported and require a long cage (SGS) rear derailleur with no more than a 12T difference in front chainrings (with an 11-46T cassette)Triple chainrings are not supportedDirect Mount native frames and SRAM derailleurs are not supportedManufacturer's Part Number: WT11S44GLINKWeight: 19g*Please Note: Due to variations in derailleur hanger geometry, chainstay length, chainring size, B-screw adjustment, and suspension configuration, individual results will vary slightly.Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Tech 3 V4 Vented Floating Disc RotorCreated by Hope to get the best performance from your Tech 3 V4 disc mountain bike (MTB) brake, this Vented Floating Disc Rotor delivers consistent braking power as you’re attacking the toughest downhill trails and riding at your limit.Heat Dispersing Brake DiscWith its extensively vented design, this brake rotor effectively reduces its working temperature by up to 15%. This enables superior braking performance when things get tough on steep Alpine descents and the World's toughest downhill tracks.All-Weather PerformanceIt also brings you exceptional braking performance in wet conditions as its fins enable water and moisture to be shed consistently. This keeps the braking surface dry and ready for when you need to kill your speed for hurtling towards berms and picking your line through technical sections.Features: Material: Braking Surface: Laser Cut Steel; Central Floating Section: CNC Machined Aluminium Mount Type: 6-bolt Compatibility: Hope V4 brake disc caliper only Only Available In 203mm size All parts made and hand assembled in United Kindom (UK) Manufactuer's Part Number: Black: HBSP305:203:6N; Red: HBSP305:203:6RWeight: 283gPlease Note: Due to its thicker design, this rotor is not compatible with any other models of calipers in Hope's hydraulic disc range. It's specifically designed for use with the Hope V4 model only.Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Floating Disc Brake RotorAn ideal upgrade for performance-seeking trail riders, this Floating Disc Brake Rotor from mountain bike (MTB) component specialists Hope will ensure you get the best out of your bike's hydraulic disc brakes. Made from custom-made stainless steel that's riveted to an Aluminium central carrier, it draws heat away from your brake pads, preventing the dreaded “brake fade” as you're attacking long descents. Suitable for the entire Hope MTB brake range, its braking surface has also been made wider to make it more compatible with other brands on the market.Features: Material: Custom Stainless-Steel braking surface riveted to an Aluminium central carrier Mount Type: 6-bolt Compatibility: Entire Hope Mountain Bike (MTB) brake range and other MTB brands too Laser cut stainless steel braking surface Wider braking surface to make it compatible with other brands Floating design deals with changes in temperature Enhanced durability Versatile Comes with relevant mounting bolts Available in a range of colours Weight: 146g (180mm)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Floating Disc Brake RotorAn ideal upgrade for performance-seeking trail riders, this Floating Disc Brake Rotor from mountain bike (MTB) component specialists Hope will ensure you get the best out of your bike's hydraulic disc brakes. Made from custom-made stainless steel that's riveted to an Aluminium central carrier, it draws heat away from your brake pads, preventing the dreaded “brake fade” as you're attacking long descents. Suitable for the entire Hope MTB brake range, its braking surface has also been made wider to make it more compatible with other brands on the market.Features: Material: Custom Stainless-Steel braking surface riveted to an Aluminium central carrier Mount Type: 6-bolt Compatibility: Entire Hope Mountain Bike (MTB) brake range and other MTB brands too Laser cut stainless steel braking surface Wider braking surface to make it compatible with other brands Floating design deals with changes in temperature Enhanced durability Versatile Comes with relevant mounting bolts Available in a range of colours Weight: 146g (180mm)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Floating Disc Brake RotorAn ideal upgrade for performance-seeking trail riders, this Floating Disc Brake Rotor from mountain bike (MTB) component specialists Hope will ensure you get the best out of your bike's hydraulic disc brakes. Made from custom-made stainless steel that's riveted to an Aluminium central carrier, it draws heat away from your brake pads, preventing the dreaded “brake fade” as you're attacking long descents. Suitable for the entire Hope MTB brake range, its braking surface has also been made wider to make it more compatible with other brands on the market.Features: Material: Custom Stainless-Steel braking surface riveted to an Aluminium central carrier Mount Type: 6-bolt Compatibility: Entire Hope Mountain Bike (MTB) brake range and other MTB brands too Laser cut stainless steel braking surface Wider braking surface to make it compatible with other brands Floating design deals with changes in temperature Enhanced durability Versatile Comes with relevant mounting bolts Available in a range of colours Weight: 146g (180mm)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Floating Disc Brake RotorAn ideal upgrade for performance-seeking trail riders, this Floating Disc Brake Rotor from mountain bike (MTB) component specialists Hope will ensure you get the best out of your bike's hydraulic disc brakes. Made from custom-made stainless steel that's riveted to an Aluminium central carrier, it draws heat away from your brake pads, preventing the dreaded “brake fade” as you're attacking long descents. Suitable for the entire Hope MTB brake range, its braking surface has also been made wider to make it more compatible with other brands on the market.Features: Material: Custom Stainless-Steel braking surface riveted to an Aluminium central carrier Mount Type: 6-bolt Compatibility: Entire Hope Mountain Bike (MTB) brake range and other MTB brands too Laser cut stainless steel braking surface Wider braking surface to make it compatible with other brands Floating design deals with changes in temperature Enhanced durability Versatile Comes with relevant mounting bolts Available in a range of colours Weight: 146g (180mm)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Floating Disc Brake RotorAn ideal upgrade for performance-seeking trail riders, this Floating Disc Brake Rotor from mountain bike (MTB) component specialists Hope will ensure you get the best out of your bike's hydraulic disc brakes. Made from custom-made stainless steel that's riveted to an Aluminium central carrier, it draws heat away from your brake pads, preventing the dreaded “brake fade” as you're attacking long descents. Suitable for the entire Hope MTB brake range, its braking surface has also been made wider to make it more compatible with other brands on the market.Features: Material: Custom Stainless-Steel braking surface riveted to an Aluminium central carrier Mount Type: 6-bolt Compatibility: Entire Hope Mountain Bike (MTB) brake range and other MTB brands too Laser cut stainless steel braking surface Wider braking surface to make it compatible with other brands Floating design deals with changes in temperature Enhanced durability Versatile Comes with relevant mounting bolts Available in a range of colours Weight: 146g (180mm)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Floating Disc Brake RotorAn ideal upgrade for performance-seeking trail riders, this Floating Disc Brake Rotor from mountain bike (MTB) component specialists Hope will ensure you get the best out of your bike's hydraulic disc brakes. Made from custom-made stainless steel that's riveted to an Aluminium central carrier, it draws heat away from your brake pads, preventing the dreaded “brake fade” as you're attacking long descents. Suitable for the entire Hope MTB brake range, its braking surface has also been made wider to make it more compatible with other brands on the market.Features: Material: Custom Stainless-Steel braking surface riveted to an Aluminium central carrier Mount Type: 6-bolt Compatibility: Entire Hope Mountain Bike (MTB) brake range and other MTB brands too Laser cut stainless steel braking surface Wider braking surface to make it compatible with other brands Floating design deals with changes in temperature Enhanced durability Versatile Comes with relevant mounting bolts Available in a range of colours Weight: 146g (180mm)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.