Nukeproof Reactor 290 Carbon Frame (RockShox Shock)The Reactor 290 Carbon Frame from Nukeproof features an ultra-strong monocoque carbon fibre build that is ideal for high-speed trail riding anywhere on Earth. This trail-ready full suspension mountain bike (MTB) frame is more than capable of handling all the demands associated with all-day epics on the trails. Ready for charging across rock gardens, tree roots and debris, Nukeproof has also kitted out this model with a high-quality RockShox Super Deluxe Ultimate RC2T rear shock that brings exceptional smoothness, traction tuneability and control to every ride, over all terrain conditions. Designed for modern trail riding, its 148x12mm Boost rear hub spacing gives it increased stiffness and strength, while its updated geometry with internal cable routing delivers slick handling on the most demanding of terrains.From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at.Full Suspension Carbon Fibre MTB FrameTo optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size.Speed or Play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”?Adjustable GeometryAll Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail - As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities.Suspension DesignTo ensure the bike could climb as well as it descends, Nukeproof designed the 4 bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid-stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. RockShox Super Deluxe Ultimate Rear ShockDebuting a revolution in damper technology, the RC2T damper, found at the Ultimate level, allows for the most precise compression tuning ever seen—the kind that makes the millisecond's difference between winning and learning. Tunability's the name of the game—now you can fine-tune shock feel throughout travel from top to bottom out—or bottomless—it's up to you to decide. Super Deluxe stakes its claim as the premier performance technology required by riders gunning for the crown. Let the winning legacy live on. Engineered to strike a chord, the new DebonAir+ system was built on the idea of tuneability. Designed to meet the needs of all types of riders, DebonAir+ offers two different air cans to augment each frame's particular kinematics. Utilizing a needle that rations the flow of oil as the piston moves through the stroke, Hydraulic Bottom Out kicks in within the last 20% of travel, sparing you the pain of that harsh clanking bottom out after impact without sacrificing reactivity or traction. Found in our Super Deluxe lineup, Hydraulic Bottom Out plays nice with our Bottomless Tokens, allowing riders to fine-tune their air spring without worrying about bottoming out. Features: Material: Ultra Strong T700/800 Monocoque Carbon Fibre, 130mm travel Use: Mountain Bike, All Mountain, Trail Shock: RockShox Super Deluxe Ultimate RC2T, Custom 0L1 32SB tune (L1 compression Tune with Linear Air Can, 0 Neg, 1 Pos Spacer and 320 lockout force) 210x55mm, Bearing End Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internal cable routing ISCG05 mount Enduro Bearings Weight: 3.5Kgs/7.7lbs (Medium option)RockShox Super Deluxe Ultimate Technologies: RC2T Damper, the most tunable shock damper RockShox has ever made, offers completely independent High Speed and Low Speed Compression adjustments, eliminating “cross-talk” so you can tune your shock to exactly how you want it to perform DebonAir+ air spring maximizes fine-tuning potential, allowing you to tune both the negative and positive air volume to perfectly match your bike, desired ride feel, and the trail ahead The optional Hydraulic Bottom Out kicks in to restrict the flow of oil within the last 20% of travel, offering a soft hydraulic cushion that reduces harsh bottom out 15 clicks of Rebound adjustment offer a wider range of tunability and accommodate more rider types Castled bottom out bumper reduces harsh bottom-out, leaving extra room for the bold to go big Increased bushing overlap maximizes small bump performance and grip Separate and independent Open and Threshold pistons tuned exactly for your ride Fresh new premium graphics package to flash on the podium or as you blaze past your buddies on the doubletrack Top-of-the-line Maxima Plush Dynamic Suspension Lube reduces friction to help maintain tractionBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Reactor 290 Carbon Frame (RockShox Shock)The Reactor 290 Carbon Frame from Nukeproof features an ultra-strong monocoque carbon fibre build that is ideal for high-speed trail riding anywhere on Earth. This trail-ready full suspension mountain bike (MTB) frame is more than capable of handling all the demands associated with all-day epics on the trails. Ready for charging across rock gardens, tree roots and debris, Nukeproof has also kitted out this model with a high-quality RockShox Super Deluxe Ultimate RC2T rear shock that brings exceptional smoothness, traction tuneability and control to every ride, over all terrain conditions. Designed for modern trail riding, its 148x12mm Boost rear hub spacing gives it increased stiffness and strength, while its updated geometry with internal cable routing delivers slick handling on the most demanding of terrains.From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at.Full Suspension Carbon Fibre MTB FrameTo optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size.Speed or Play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”?Adjustable GeometryAll Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail - As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities.Suspension DesignTo ensure the bike could climb as well as it descends, Nukeproof designed the 4 bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid-stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. RockShox Super Deluxe Ultimate Rear ShockDebuting a revolution in damper technology, the RC2T damper, found at the Ultimate level, allows for the most precise compression tuning ever seen—the kind that makes the millisecond's difference between winning and learning. Tunability's the name of the game—now you can fine-tune shock feel throughout travel from top to bottom out—or bottomless—it's up to you to decide. Super Deluxe stakes its claim as the premier performance technology required by riders gunning for the crown. Let the winning legacy live on. Engineered to strike a chord, the new DebonAir+ system was built on the idea of tuneability. Designed to meet the needs of all types of riders, DebonAir+ offers two different air cans to augment each frame's particular kinematics. Utilizing a needle that rations the flow of oil as the piston moves through the stroke, Hydraulic Bottom Out kicks in within the last 20% of travel, sparing you the pain of that harsh clanking bottom out after impact without sacrificing reactivity or traction. Found in our Super Deluxe lineup, Hydraulic Bottom Out plays nice with our Bottomless Tokens, allowing riders to fine-tune their air spring without worrying about bottoming out. Features: Material: Ultra Strong T700/800 Monocoque Carbon Fibre, 130mm travel Use: Mountain Bike, All Mountain, Trail Shock: RockShox Super Deluxe Ultimate RC2T, Custom 0L1 32SB tune (L1 compression Tune with Linear Air Can, 0 Neg, 1 Pos Spacer and 320 lockout force) 210x55mm, Bearing End Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internal cable routing ISCG05 mount Enduro Bearings Weight: 3.5Kgs/7.7lbs (Medium option)RockShox Super Deluxe Ultimate Technologies: RC2T Damper, the most tunable shock damper RockShox has ever made, offers completely independent High Speed and Low Speed Compression adjustments, eliminating “cross-talk” so you can tune your shock to exactly how you want it to perform DebonAir+ air spring maximizes fine-tuning potential, allowing you to tune both the negative and positive air volume to perfectly match your bike, desired ride feel, and the trail ahead The optional Hydraulic Bottom Out kicks in to restrict the flow of oil within the last 20% of travel, offering a soft hydraulic cushion that reduces harsh bottom out 15 clicks of Rebound adjustment offer a wider range of tunability and accommodate more rider types Castled bottom out bumper reduces harsh bottom-out, leaving extra room for the bold to go big Increased bushing overlap maximizes small bump performance and grip Separate and independent Open and Threshold pistons tuned exactly for your ride Fresh new premium graphics package to flash on the podium or as you blaze past your buddies on the doubletrack Top-of-the-line Maxima Plush Dynamic Suspension Lube reduces friction to help maintain tractionBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Tech SocksCreated to keep your feet supremely comfortable on your mountain bike, the Tech Socks from Nukeproof give you the ultimate balance of absorption, wicking, warmth and comfort for hours on the trails.You've got the rest of your mountain bike kit dialled in but one area you may overlook is socks. Your standard sports socks will soon leave your feet hot and sweaty but with the Tech Socks by Nukeproof you can look forward to dry and sweat-free mountain biking. They're quick to wick moisture off the skin and being fast drying you can rip through mud and puddles without water hanging around too long and it also means quicker drying times after washing, so you'll get more use out of your socks when you're riding regularly. Features:Material: 81% Polyester, 18% Polyamide, 1% ElastaneFast WickingFast DryingSold in single pairsBuy Troy Lee Designs Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon Carbon Riser BarsThe Nukeproof Horizon Carbon Riser Bar was developed to be lightweight and comfortable, while far exceeding the strength and durability of an aluminium bar. In fact, the Horizon carbon bar far exceeds the strength of many leading carbon bar competitors in laboratory testing, withstanding loads of over 700kg. High Strength and DampingThis strength is due to the Nukeproof proprietary carbon layup and the addition of a unique layer of glass fibre for additional damping and reinforcement. Safety was the primary objective, in addition to providing the great ride quality only a high-end carbon bar can. Further safety is provided by the no-slip particle paint applied to the controls and stem mounting areas. Nukeproof are so confident in their Horizon carbon bar that they back it up with a lifetime warranty!Features:Material: CarbonBacksweep: 9°Upsweep: 6°Use: Trail, All Mountain, Enduro, Downhill, FreerideWeight: 260g (800mm x 35mm rise)Handlebar instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Megawatt 297 RS Alloy Bike (X01)The Megawatt 297 RS alloy bike is the pinnacle of electric bike (E-Bike) performance from Nukeproof. In addition to a lightweight and robust chassis, at the heart of the Megawatt 297 RS, is RockShox Zeb Ultimate Charger coated 170mm-travel suspension forks and a RockShox Super Deluxe Ultimate rear shock. This full-suspension electric bike (E-Bike) also features Shimano STEPS EP8 electric motor drive and a SRAM XO1 AXS Eagle 12-Speed groupset with a wide-ranging 10-52-tooth cassette and SRAM Code RSC hydraulic disc brakes. And it rolls upon Nukeproof Horizon V2 Tubeless Ready wheels wrapped in Michelin DH22 TLR all-terrain tyres.Since 2009 the Nukeproof Mega has been on a journey of constant development. From iteration to iteration, small incremental improvements gradually add up to become today's thoroughbred Enduro race bike: The Mega V4. All things considered; you could forgive the team for resting on their laurels. Bike design and technology must move fast to keep up with the evolving demands of our customers. If you don't keep up, then you get left behind.The Megawatt is Nukeproof's first E-Bike, and it has won over the media with its agile handling, impressive suspension and balanced geometry. The top priority for Nukeproof was to partner with the right specialist; a brand that could offer leading-edge technology to help create ultra-competitive products whilst having the infrastructure in place to support customers during ownership.Shimano STEPS EP8 Electric Motor Drive UnitUsing the latest Shimano STEPS EP8 system, the Megawatt has the torque, range, and performance to wear the Mega name. The Megawatt was developed alongside the latest Mega V4. This ensured that the geometry, packaging and suspension were optimised to perform and held no compromises. The Megawatt exceeds expectations with its descending performance and benefits from the combination of awesome geometry and the Shimano EP8 assistance to climb back to the top for more.Mullet Wheel Standard: 29" Front and 27.5" Rear WheelWhilst humans may not have changed size much in recent years; the bikes they choose to ride most certainly have. To ensure a perfectly dialled fit we now offer the 297 bikes in S, M, L, XL and XXL.With a 29” wheel up front, maximises grip and rolling efficiency whilst the 27.5” wheel out back, allows the bike to run shorter chainstays to ensure nimble handling and maximise manoeuvrability. The rear chainstays also benefit from a 3D moulded chain guard to keep the frame protected and running quiet allowing you to concentrate on the trail ahead.Modern Enduro Inspired Race GeometryLower, longer, steeper and slacker. Our new geometry is now designed around the saddle offset for each size to optimise seated weight distribution. This results in steeper seat angles across the board but especially on larger sizes for taller riders. This in turn results in longer reach figures to ensure a comfortable cockpit of each size. To further aid the perfect fit we have also used shorter seat tubes which are designed to maximise seat post insertion depths. Finally, all new Mega bikes are now designed to use short offset forks to further improve both climbing and descending capabilities.Progressive, Supple and Supportive 4-Bar Horst Suspension PlatformTo step-change the Mega's suspension design we went back to the drawing board and started afresh. We redesigned the Mega 4 bar horst linkage to be super supple over small bumps, progressive and supportive throughout the mid-stoke for support when pedalling, cornering and pumping, with increased end stroke leverage to allow more tuning options with volume spacers. The new kinematic is designed to have higher levels of anti-squat for climbing gears but this reduces as you drop down the cassette. The result is a bike that is more confidence-inspiring everywhere on the hill. It behaves itself on the climbs; yet can still be thrashed through the roughest and most technical terrain on the way back down. The new Mega also has a wide SAG range (30%-35%) to allow you; the rider, to tune the characteristics of the bike to your preferences.Durable and Lightweight Alloy Frame with Internal BatteryThe Megawatt was designed from the outset to optimise the performance of the Shimano EP8 Motor and battery. Crafted from hydroformed 6061 aluminium, the Megawatt shares some characteristics and tube shapes with its Mega sibling but features several notable differences. An all-new one-piece cast Bottom Bracket shell has been engineered to house the Shimano Steps EP8 Motor. The downtube to has been designed to maximise strength and rigidity whilst providing easy access to remove the internal battery for charging or transportation.The Megawatt is offered in three specifications; Comp, Elite or Factory, to suit your riding needs and budget. Please see individual specs for full details. The Factory and Elite use a 630Wh Shimano battery, whilst the Comp uses a 504Wh battery. Both battery sizes will fit in each model with a secure and easy-to-flip mount system in all models. All bikes include a Shimano battery charger and adaptor to allow both on-bike and off-the-bike charging using either the Euro or UK charging cables included.Internal Frame Cable Routing Featuring entry points in the downtube of the frame, the frame's downtube has internal routing for the dropper cable, rear brake lines, SD50 wires and gearing. This ensures a more user-friendly E-Bike for general maintenance and upgrading of components.The Megawatt: A Mega V4 with an engine. Designed so you can maximise the amount of time spent descending by getting you back to the top faster, again and again (and again).Please Note: This E-Bike (electric bike) has a max assisted speed of 25 km/h / 15.5 mphFeatures Frame: Nukeproof Megawatt 297 Alloy, 170mm Travel, custom triple butted hydro-formed tube set, internal Battery, Internal cable routing through downtube, Enduro Bearings, Boost 148mm rear axle spacing, 3D contoured Rubber frame protection, Shimano STEPS compatible. Drive System: Shimano STEPS EP8, 250W, 85Nm Battery: Shimano E8036, 630Wh Display: Shimano EM800 Assist Switch: Shimano EM800-L Fork: RockShox Zeb Ultimate Charger 2.1 RC2 180mm, 44mm Offset, BOOST, Debonair, Grey Shock: RockShox Super Deluxe Ultimate RCT Coil, Custom LNL / L1 Hotdog (S/MD) LNL / L Hotdog (L/XL/XXL) S320 tune, 205x65mm, Bearing End, Spring S:400lbs; MD/L:450lbs; XL:500lbs; XXL:550lbs Front Wheel: Nukeproof Horizon V2, 29", 6 Bolt, 110x15mm Rear Wheel: Nukeproof Horizon V2, 27.5", 6 Bolt, XD Driver, 148x12mm Tyres: Michelin DH22 TLR 29" x 2.4, Front and 27.5’’x2.4 Rear Crankset: Shimano EM8150 XT, HOLLOWTECH II, 165mm, 34T SRAM Eagle Chainring Shifter: SRAM Eagle AXS 12-Speed, Black Rear Derailleur: SRAM XO1 AXS Eagle 12-Speed, Black Chain: SRAM GX Eagle 12-Speed Cassette: SRAM XO1 Eagle 12-Speed, CS XG1295 EAGLE 10-52T Chain Guide: Nukeproof Shimano Steps, 32-38t, ISCG-05, black Brakes: SRAM Code RSC, Sintered pads Front Rotor: SRAM Centreline, 220mm Rear Rotor: SRAM Centreline, 200mm Handlebars: Nukeproof Horizon Carbon V2, S/M: 12mm Rise Width - 780mm, L/XL/XXL: 25mm Rise Width - 800mm Stem: Nukeproof Horizon, 45mm, Black Saddle: Nukeproof Seatpost: Bikeyoke Revive with Triggy 1x Remote, 31.6mm; S:125mm drop; M:160mm drop; L:185mm drop; XL/XXL:213mm drop Headset: Nukeproof Neutron E-Bike Block Set, sealed bearing, 44-56 IITS Grips: Nukeproof Sam Hill Signature Weight: 24.69kg Medium TubelessKey Information: Material: Hydroformed 6061-T6 Triple-Butted Aluminium Fork Travel: 180mm Axle to Crown: 596mm Fork Offset: 44mm Rear Travel: 170mm Wheels Size: Front: 29" Rear: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 0.3 Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing: S/M/L/XL/XXL Headtube: 56-66mm Tapered Semi-Integrated Headset: ZS56-28.6 / ZS66/40 (1.5" Tapered) or ZS56-28.6 / ZS66/46 (1.8" Tapered) Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm Motor System: Shimano STEPS EP8, 250W, 85Nm Battery: Can fit either Shimano E8035, 504Wh or Shimano E8036, 630Wh Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Brake Mount: 180mm Direct Post Protection: 3D Contoured Motor Protector and Rubber Frame Protection for DT/SS/CS/Battery DoorPlease NoteThis E-Bike (electric bike) has a max assisted speed of 25 km/h / 15.5 mphEasy AssemblyWhen you order a bike, one of our trained mechanics will carefully prepare and pack your bike for shipping. Upon delivery, the assembly is simple and all necessary tools and plastic pedals are conveniently included in the box.Depending on the delivery service and destination, bikes will either be delivered in a large or a small box. Below is a guide as to how your bike will arrive: All bikes for delivery within the UK and Republic of Ireland will be delivered in a large box, except for balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for delivery within the EU on a standard service will be delivered in a large box. If an express delivery option is chosen, your bike will be packed into a small box. Again, the exception is balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for worldwide delivery outside the EU will be delivered in small boxes.This video demonstrates assembly from a SMALL BOX.This video demonstrates assembly from a LARGE BOX.Please note that due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.Buy Nukeproof Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Megawatt 297 RS Alloy Bike (X01)The Megawatt 297 RS alloy bike is the pinnacle of electric bike (E-Bike) performance from Nukeproof. In addition to a lightweight and robust chassis, at the heart of the Megawatt 297 RS, is RockShox Zeb Ultimate Charger coated 170mm-travel suspension forks and a RockShox Super Deluxe Ultimate rear shock. This full-suspension electric bike (E-Bike) also features Shimano STEPS EP8 electric motor drive and a SRAM XO1 AXS Eagle 12-Speed groupset with a wide-ranging 10-52-tooth cassette and SRAM Code RSC hydraulic disc brakes. And it rolls upon Nukeproof Horizon V2 Tubeless Ready wheels wrapped in Michelin DH22 TLR all-terrain tyres.Since 2009 the Nukeproof Mega has been on a journey of constant development. From iteration to iteration, small incremental improvements gradually add up to become today's thoroughbred Enduro race bike: The Mega V4. All things considered; you could forgive the team for resting on their laurels. Bike design and technology must move fast to keep up with the evolving demands of our customers. If you don't keep up, then you get left behind.The Megawatt is Nukeproof's first E-Bike, and it has won over the media with its agile handling, impressive suspension and balanced geometry. The top priority for Nukeproof was to partner with the right specialist; a brand that could offer leading-edge technology to help create ultra-competitive products whilst having the infrastructure in place to support customers during ownership.Shimano STEPS EP8 Electric Motor Drive UnitUsing the latest Shimano STEPS EP8 system, the Megawatt has the torque, range, and performance to wear the Mega name. The Megawatt was developed alongside the latest Mega V4. This ensured that the geometry, packaging and suspension were optimised to perform and held no compromises. The Megawatt exceeds expectations with its descending performance and benefits from the combination of awesome geometry and the Shimano EP8 assistance to climb back to the top for more.Mullet Wheel Standard: 29" Front and 27.5" Rear WheelWhilst humans may not have changed size much in recent years; the bikes they choose to ride most certainly have. To ensure a perfectly dialled fit we now offer the 297 bikes in S, M, L, XL and XXL.With a 29” wheel up front, maximises grip and rolling efficiency whilst the 27.5” wheel out back, allows the bike to run shorter chainstays to ensure nimble handling and maximise manoeuvrability. The rear chainstays also benefit from a 3D moulded chain guard to keep the frame protected and running quiet allowing you to concentrate on the trail ahead.Modern Enduro Inspired Race GeometryLower, longer, steeper and slacker. Our new geometry is now designed around the saddle offset for each size to optimise seated weight distribution. This results in steeper seat angles across the board but especially on larger sizes for taller riders. This in turn results in longer reach figures to ensure a comfortable cockpit of each size. To further aid the perfect fit we have also used shorter seat tubes which are designed to maximise seat post insertion depths. Finally, all new Mega bikes are now designed to use short offset forks to further improve both climbing and descending capabilities.Progressive, Supple and Supportive 4-Bar Horst Suspension PlatformTo step-change the Mega's suspension design we went back to the drawing board and started afresh. We redesigned the Mega 4 bar horst linkage to be super supple over small bumps, progressive and supportive throughout the mid-stoke for support when pedalling, cornering and pumping, with increased end stroke leverage to allow more tuning options with volume spacers. The new kinematic is designed to have higher levels of anti-squat for climbing gears but this reduces as you drop down the cassette. The result is a bike that is more confidence-inspiring everywhere on the hill. It behaves itself on the climbs; yet can still be thrashed through the roughest and most technical terrain on the way back down. The new Mega also has a wide SAG range (30%-35%) to allow you; the rider, to tune the characteristics of the bike to your preferences.Durable and Lightweight Alloy Frame with Internal BatteryThe Megawatt was designed from the outset to optimise the performance of the Shimano EP8 Motor and battery. Crafted from hydroformed 6061 aluminium, the Megawatt shares some characteristics and tube shapes with its Mega sibling but features several notable differences. An all-new one-piece cast Bottom Bracket shell has been engineered to house the Shimano Steps EP8 Motor. The downtube to has been designed to maximise strength and rigidity whilst providing easy access to remove the internal battery for charging or transportation.The Megawatt is offered in three specifications; Comp, Elite or Factory, to suit your riding needs and budget. Please see individual specs for full details. The Factory and Elite use a 630Wh Shimano battery, whilst the Comp uses a 504Wh battery. Both battery sizes will fit in each model with a secure and easy-to-flip mount system in all models. All bikes include a Shimano battery charger and adaptor to allow both on-bike and off-the-bike charging using either the Euro or UK charging cables included.Internal Frame Cable Routing Featuring entry points in the downtube of the frame, the frame's downtube has internal routing for the dropper cable, rear brake lines, SD50 wires and gearing. This ensures a more user-friendly E-Bike for general maintenance and upgrading of components.The Megawatt: A Mega V4 with an engine. Designed so you can maximise the amount of time spent descending by getting you back to the top faster, again and again (and again).Please Note: This E-Bike (electric bike) has a max assisted speed of 25 km/h / 15.5 mphFeatures Frame: Nukeproof Megawatt 297 Alloy, 170mm Travel, custom triple butted hydro-formed tube set, internal Battery, Internal cable routing through downtube, Enduro Bearings, Boost 148mm rear axle spacing, 3D contoured Rubber frame protection, Shimano STEPS compatible. Drive System: Shimano STEPS EP8, 250W, 85Nm Battery: Shimano E8036, 630Wh Display: Shimano EM800 Assist Switch: Shimano EM800-L Fork: RockShox Zeb Ultimate Charger 2.1 RC2 180mm, 44mm Offset, BOOST, Debonair, Grey Shock: RockShox Super Deluxe Ultimate RCT Coil, Custom LNL / L1 Hotdog (S/MD) LNL / L Hotdog (L/XL/XXL) S320 tune, 205x65mm, Bearing End, Spring S:400lbs; MD/L:450lbs; XL:500lbs; XXL:550lbs Front Wheel: Nukeproof Horizon V2, 29", 6 Bolt, 110x15mm Rear Wheel: Nukeproof Horizon V2, 27.5", 6 Bolt, XD Driver, 148x12mm Tyres: Michelin DH22 TLR 29" x 2.4, Front and 27.5’’x2.4 Rear Crankset: Shimano EM8150 XT, HOLLOWTECH II, 165mm, 34T SRAM Eagle Chainring Shifter: SRAM Eagle AXS 12-Speed, Black Rear Derailleur: SRAM XO1 AXS Eagle 12-Speed, Black Chain: SRAM GX Eagle 12-Speed Cassette: SRAM XO1 Eagle 12-Speed, CS XG1295 EAGLE 10-52T Chain Guide: Nukeproof Shimano Steps, 32-38t, ISCG-05, black Brakes: SRAM Code RSC, Sintered pads Front Rotor: SRAM Centreline, 220mm Rear Rotor: SRAM Centreline, 200mm Handlebars: Nukeproof Horizon Carbon V2, S/M: 12mm Rise Width - 780mm, L/XL/XXL: 25mm Rise Width - 800mm Stem: Nukeproof Horizon, 45mm, Black Saddle: Nukeproof Seatpost: Bikeyoke Revive with Triggy 1x Remote, 31.6mm; S:125mm drop; M:160mm drop; L:185mm drop; XL/XXL:213mm drop Headset: Nukeproof Neutron E-Bike Block Set, sealed bearing, 44-56 IITS Grips: Nukeproof Sam Hill Signature Weight: 24.69kg Medium TubelessKey Information: Material: Hydroformed 6061-T6 Triple-Butted Aluminium Fork Travel: 180mm Axle to Crown: 596mm Fork Offset: 44mm Rear Travel: 170mm Wheels Size: Front: 29" Rear: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 0.3 Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing: S/M/L/XL/XXL Headtube: 56-66mm Tapered Semi-Integrated Headset: ZS56-28.6 / ZS66/40 (1.5" Tapered) or ZS56-28.6 / ZS66/46 (1.8" Tapered) Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm Motor System: Shimano STEPS EP8, 250W, 85Nm Battery: Can fit either Shimano E8035, 504Wh or Shimano E8036, 630Wh Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Brake Mount: 180mm Direct Post Protection: 3D Contoured Motor Protector and Rubber Frame Protection for DT/SS/CS/Battery DoorPlease NoteThis E-Bike (electric bike) has a max assisted speed of 25 km/h / 15.5 mphEasy AssemblyWhen you order a bike, one of our trained mechanics will carefully prepare and pack your bike for shipping. Upon delivery, the assembly is simple and all necessary tools and plastic pedals are conveniently included in the box.Depending on the delivery service and destination, bikes will either be delivered in a large or a small box. Below is a guide as to how your bike will arrive: All bikes for delivery within the UK and Republic of Ireland will be delivered in a large box, except for balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for delivery within the EU on a standard service will be delivered in a large box. If an express delivery option is chosen, your bike will be packed into a small box. Again, the exception is balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for worldwide delivery outside the EU will be delivered in small boxes.This video demonstrates assembly from a SMALL BOX.This video demonstrates assembly from a LARGE BOX.Please note that due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.Buy Nukeproof Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Megawatt 297 Factory Alloy Bike (XT)The Megawatt 297 Factory Alloy Bike from Nukeproof is designed for the most demanding riders, who want to push their limits as far as possible. This bike features a robust and lightweight frame armed with Fox Factory Kashima coated 170mm-travel suspension forks and a Float X2 rear shock - this combo glides across the roughest terrain with outstanding stability and control. A Shimano STEPS EP8 electric motor drive, Shimano XT M8100 12-Speed groupset and wide-ranging 10-51T cassette gets you up steep climbs and ensures all-day riding efficiency. And it rolls upon DT Swiss H1700 Spline Tubeless Ready enduro wheels wrapped in high-grip Maxxis Assegai Wide Trail Tubeless Ready tyres.This stylish full-suspension electric bike (E-Bike) also has an integrated battery, a Bikeyoke Divine Stealth internally routed dropper seatpost and an aftermarket-quality Nukeproof finishing kit.Since 2009 the Nukeproof Mega has been on a journey of constant development. From iteration to iteration, small incremental improvements gradually add up to become today's thoroughbred Enduro race bike: The Mega V4. All things considered; you could forgive the team for resting on their laurels. Bike design and technology must move fast to keep up with the evolving demands of our customers. If you don't keep up, then you get left behind.The Megawatt is Nukeproof's first E-Bike, and it has won over the media with its agile handling, impressive suspension and balanced geometry. The top priority for Nukeproof was to partner with the right specialist; a brand that could offer leading-edge technology to help create ultra-competitive products whilst having the infrastructure in place to support customers during ownership.Shimano STEPS EP8 Electric Motor Drive Unit Using the latest Shimano STEPS EP8 system, the Megawatt has the torque, range, and performance to wear the Mega name. The Megawatt was developed alongside the latest Mega V4. This ensured that the geometry, packaging and suspension were optimised to perform and held no compromises. The Megawatt exceeds expectations with its descending performance and benefits from the combination of awesome geometry and the Shimano EP8 assistance to climb back to the top for more.Mullet Wheel Standard: 29" Front and 27.5" Rear WheelWhilst humans may not have changed size much in recent years; the bikes they choose to ride most certainly have. To ensure a perfectly dialled fit we now offer the 297 bikes in S, M, L, XL and XXL.With a 29” wheel up front, maximises grip and rolling efficiency whilst the 27.5” wheel out back, allows the bike to run shorter chainstays to ensure nimble handling and maximise manoeuvrability. The rear chainstays also benefit from a 3D moulded chain guard to keep the frame protected and running quiet allowing you to concentrate on the trail ahead.Modern Enduro Inspired Race GeometryLower, longer, steeper and slacker. Our new geometry is now designed around the saddle offset for each size to optimise seated weight distribution. This results in steeper seat angles across the board but especially on larger sizes for taller riders. This in turn results in longer reach figures to ensure a comfortable cockpit on each size. To further aid the perfect fit we have also used shorter seat tubes which are designed to maximise seat post insertion depths. Finally, all new Mega bikes are now designed to use short offset forks to further improve both climbing and descending capabilities.Progressive, Supple and Supportive 4-Bar Horst Suspension PlatformTo step-change the Mega's suspension design we went back to the drawing board and started afresh. We redesigned the Mega 4 bar horst linkage to be super supple over small bumps, progressive and supportive throughout the mid-stoke for support when pedalling, cornering and pumping, with increased end stroke leverage to allow more tuning options with volume spacers. The new kinematic is designed to have higher levels of anti-squat for climbing gears but this reduces as you drop down the cassette. The result is a bike that is more confidence-inspiring everywhere on the hill. It behaves itself on the climbs; yet can still be thrashed through the roughest and most technical terrain on the way back down. The new Mega also has a wide SAG range (30%-35%) to allow you; the rider, to tune the characteristics of the bike to your preferences.Durable and Lightweight Alloy Frame with Internal BatteryThe Megawatt was designed from the outset to optimise the performance of the Shimano EP8 Motor and battery. Crafted from hydroformed 6061 aluminium, the Megawatt shares some characteristics and tube shapes with its Mega sibling but features several notable differences. An all-new one-piece cast Bottom Bracket shell has been engineered to house the Shimano Steps EP8 Motor. The downtube to has been designed to maximise strength and rigidity whilst providing easy access to remove the internal battery for charging or transportation.The Megawatt is offered in three specifications; Comp, Elite or Factory, to suit your riding needs and budget. Please see individual spec's for full details. The Factory and Elite use a 630Wh Shimano battery, whilst the Comp uses a 504Wh battery. Both battery sizes will fit in each model with a secure and easy to flip mount system in all models. All bikes include a Shimano battery charger and adaptor to allow both on bike and off the bike charging using either the Euro or UK charging cables included.Internal Frame Cable Routing Featuring entry points in the frames downtube, the frames downtube has internal routing for the dropper cable, rear brake lines, SD50 wires and gearing. This ensures a more user-friendly E-Bike for general maintenance and upgrading of components. The Megawatt: A Mega V4 with an engine. Designed so you can maximise the amount of time spent descending by getting you back to the top faster, again and again (and again).Please Note: This E-Bike (electric bike) has a max assisted speed of 25 km/h / 15.5 mph Features Frame: Nukeproof Megawatt 297 Alloy, 170mm Travel, custom triple butted hydro-formed tube set, internal Battery, Internal cable routing through downtube, Enduro Bearings, Boost 148mm rear axle spacing, 3D contoured Rubber frame protection, Shimano STEPS compatible. Drive System: Shimano STEPS EP8, 250W, 85Nm Battery: Shimano E8036, 630Wh Display: Shimano EM800 Assist Switch: Shimano EM800-L Fork: Fox 38 Float, 29”, Factory Series, Kashima, Grip 2 Damper, 170mm, 44mm Offset, BOOST, 1.5T Steerer, 68mm Crown, Black Shock: Fox Float X2, Factory Series, Kashima, EVOL, 2 Position lever, Custom LCL LRL tune, 230x62.5mm, Bearing End, 2x 0.3 spacer fitted. Front Wheel: DT Swiss H1700 SPLINE 30, 29", 6 Bolt, 110x15mm Rear Wheel: DT Swiss H1700 SPLINE 30, 27.5", 6 Bolt, Shimano Microspline Driver, 148x12mm Tyres: Front: Maxxis Assegai 29”x2.5 WT 3C MaxxGrip/DD/TR, Rear: Maxxis Assegai 27.5”x2.5 WT 3C MaxxTerra/DD/TR Crankset: Shimano EM8150 XT, HOLLOWTECH II, 165mm, 34T, 52mm Chainline Shifter: Shimano XT M8100-R, 12-speed Rapidfire Plus, I-Spec EV Rear Derailleur: Shimano XT M8100, SGS 12-Speed, Shadow Plus Chain: Shimano XT M8100 HG 12-speed Inc Quicklink Cassette: Shimano XT M8100-12, 12-Speed (HYPERGLIDE+), 10-51T Chain Guide: Shimano EM800 drive unit mount Brakes: Shimano XT M8120, 4 Pot Brake, Metallic Pads Front Rotor: Shimano SM-RT76, 220mm Rear Rotor: Shimano SM-RT76, 203mm Handlebars: Nukeproof Horizon, S/M: 12mm Rise Width - 780mm, L/XL/XXL: 25mm Rise Width - 800mm Stem: Nukeproof Horizon, 45mm, Black Saddle: Nukeproof, Black Seatpost: Bikeyoke Divine Stealth with Brand-X Remote lever, S:125mm drop; M:160mm drop; XL/XXL:185mm drop Headset: Nukeproof Neutron E-Bike Block Set, sealed bearings, ZS56/28.6 - ZS66/40 Grips: Nukeproof Sam Hill Signature Battery Charger: Shimano E6002 Certification: EN 15194 Compliant Weight: 24.25kg Medium Tubeless Key Information: Material: Hydroformed 6061-T6 Triple-Butted Aluminium Fork Travel: 170mm Axle to Crown: 582mm Fork Offset: 44mm Rear Travel: 170mm Wheels Size: Front: 29" Rear: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 56-66mm Tapered Semi-Integrated Headset: ZS56-28.6 / ZS66/40 (1.5" Tapered) or ZS56-28.6 / ZS66/46 (1.8" Tapered) Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm Motor System: Shimano STEPS EP8, 250W, 85Nm Battery: Can fit either Shimano E8035, 504Wh or Shimano E8036, 630Wh Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Brake Mount: 180mm Direct Post Protection: 3D Contoured Motor Protector and Rubber Frame Protection for DT/SS/CS/Battery DoorPlease NoteThis E-Bike (electric bike) has a max assisted speed of 25 km/h / 15.5 mphEasy AssemblyWhen you order a bike, one of our trained mechanics will carefully prepare and pack your bike for shipping. Upon delivery, the assembly is simple and all necessary tools and plastic pedals are conveniently included in the box.Depending on the delivery service and destination, bikes will either be delivered in a large or a small box. Below is a guide as to how your bike will arrive: All bikes for delivery within the UK and Republic of Ireland will be delivered in a large box, except for balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for delivery within the EU on a standard service will be delivered in a large box. If an express delivery option is chosen, your bike will be packed into a small box. Again, the exception is balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for worldwide delivery outside the EU will be delivered in small boxes.This video demonstrates assembly from a SMALL BOX.This video demonstrates assembly from a LARGE BOX.Please note that due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.Buy Nukeproof Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Megawatt 297 Factory Alloy Bike (XT)The Megawatt 297 Factory Alloy Bike from Nukeproof is designed for the most demanding riders, who want to push their limits as far as possible. This bike features a robust and lightweight frame armed with Fox Factory Kashima coated 170mm-travel suspension forks and a Float X2 rear shock - this combo glides across the roughest terrain with outstanding stability and control. A Shimano STEPS EP8 electric motor drive, Shimano XT M8100 12-Speed groupset and wide-ranging 10-51T cassette gets you up steep climbs and ensures all-day riding efficiency. And it rolls upon DT Swiss H1700 Spline Tubeless Ready enduro wheels wrapped in high-grip Maxxis Assegai Wide Trail Tubeless Ready tyres.This stylish full-suspension electric bike (E-Bike) also has an integrated battery, a Bikeyoke Divine Stealth internally routed dropper seatpost and an aftermarket-quality Nukeproof finishing kit.Since 2009 the Nukeproof Mega has been on a journey of constant development. From iteration to iteration, small incremental improvements gradually add up to become today's thoroughbred Enduro race bike: The Mega V4. All things considered; you could forgive the team for resting on their laurels. Bike design and technology must move fast to keep up with the evolving demands of our customers. If you don't keep up, then you get left behind.The Megawatt is Nukeproof's first E-Bike, and it has won over the media with its agile handling, impressive suspension and balanced geometry. The top priority for Nukeproof was to partner with the right specialist; a brand that could offer leading-edge technology to help create ultra-competitive products whilst having the infrastructure in place to support customers during ownership.Shimano STEPS EP8 Electric Motor Drive Unit Using the latest Shimano STEPS EP8 system, the Megawatt has the torque, range, and performance to wear the Mega name. The Megawatt was developed alongside the latest Mega V4. This ensured that the geometry, packaging and suspension were optimised to perform and held no compromises. The Megawatt exceeds expectations with its descending performance and benefits from the combination of awesome geometry and the Shimano EP8 assistance to climb back to the top for more.Mullet Wheel Standard: 29" Front and 27.5" Rear WheelWhilst humans may not have changed size much in recent years; the bikes they choose to ride most certainly have. To ensure a perfectly dialled fit we now offer the 297 bikes in S, M, L, XL and XXL.With a 29” wheel up front, maximises grip and rolling efficiency whilst the 27.5” wheel out back, allows the bike to run shorter chainstays to ensure nimble handling and maximise manoeuvrability. The rear chainstays also benefit from a 3D moulded chain guard to keep the frame protected and running quiet allowing you to concentrate on the trail ahead.Modern Enduro Inspired Race GeometryLower, longer, steeper and slacker. Our new geometry is now designed around the saddle offset for each size to optimise seated weight distribution. This results in steeper seat angles across the board but especially on larger sizes for taller riders. This in turn results in longer reach figures to ensure a comfortable cockpit on each size. To further aid the perfect fit we have also used shorter seat tubes which are designed to maximise seat post insertion depths. Finally, all new Mega bikes are now designed to use short offset forks to further improve both climbing and descending capabilities.Progressive, Supple and Supportive 4-Bar Horst Suspension PlatformTo step-change the Mega's suspension design we went back to the drawing board and started afresh. We redesigned the Mega 4 bar horst linkage to be super supple over small bumps, progressive and supportive throughout the mid-stoke for support when pedalling, cornering and pumping, with increased end stroke leverage to allow more tuning options with volume spacers. The new kinematic is designed to have higher levels of anti-squat for climbing gears but this reduces as you drop down the cassette. The result is a bike that is more confidence-inspiring everywhere on the hill. It behaves itself on the climbs; yet can still be thrashed through the roughest and most technical terrain on the way back down. The new Mega also has a wide SAG range (30%-35%) to allow you; the rider, to tune the characteristics of the bike to your preferences.Durable and Lightweight Alloy Frame with Internal BatteryThe Megawatt was designed from the outset to optimise the performance of the Shimano EP8 Motor and battery. Crafted from hydroformed 6061 aluminium, the Megawatt shares some characteristics and tube shapes with its Mega sibling but features several notable differences. An all-new one-piece cast Bottom Bracket shell has been engineered to house the Shimano Steps EP8 Motor. The downtube to has been designed to maximise strength and rigidity whilst providing easy access to remove the internal battery for charging or transportation.The Megawatt is offered in three specifications; Comp, Elite or Factory, to suit your riding needs and budget. Please see individual spec's for full details. The Factory and Elite use a 630Wh Shimano battery, whilst the Comp uses a 504Wh battery. Both battery sizes will fit in each model with a secure and easy to flip mount system in all models. All bikes include a Shimano battery charger and adaptor to allow both on bike and off the bike charging using either the Euro or UK charging cables included.Internal Frame Cable Routing Featuring entry points in the frames downtube, the frames downtube has internal routing for the dropper cable, rear brake lines, SD50 wires and gearing. This ensures a more user-friendly E-Bike for general maintenance and upgrading of components. The Megawatt: A Mega V4 with an engine. Designed so you can maximise the amount of time spent descending by getting you back to the top faster, again and again (and again).Please Note: This E-Bike (electric bike) has a max assisted speed of 25 km/h / 15.5 mph Features Frame: Nukeproof Megawatt 297 Alloy, 170mm Travel, custom triple butted hydro-formed tube set, internal Battery, Internal cable routing through downtube, Enduro Bearings, Boost 148mm rear axle spacing, 3D contoured Rubber frame protection, Shimano STEPS compatible. Drive System: Shimano STEPS EP8, 250W, 85Nm Battery: Shimano E8036, 630Wh Display: Shimano EM800 Assist Switch: Shimano EM800-L Fork: Fox 38 Float, 29”, Factory Series, Kashima, Grip 2 Damper, 170mm, 44mm Offset, BOOST, 1.5T Steerer, 68mm Crown, Black Shock: Fox Float X2, Factory Series, Kashima, EVOL, 2 Position lever, Custom LCL LRL tune, 230x62.5mm, Bearing End, 2x 0.3 spacer fitted. Front Wheel: DT Swiss H1700 SPLINE 30, 29", 6 Bolt, 110x15mm Rear Wheel: DT Swiss H1700 SPLINE 30, 27.5", 6 Bolt, Shimano Microspline Driver, 148x12mm Tyres: Front: Maxxis Assegai 29”x2.5 WT 3C MaxxGrip/DD/TR, Rear: Maxxis Assegai 27.5”x2.5 WT 3C MaxxTerra/DD/TR Crankset: Shimano EM8150 XT, HOLLOWTECH II, 165mm, 34T, 52mm Chainline Shifter: Shimano XT M8100-R, 12-speed Rapidfire Plus, I-Spec EV Rear Derailleur: Shimano XT M8100, SGS 12-Speed, Shadow Plus Chain: Shimano XT M8100 HG 12-speed Inc Quicklink Cassette: Shimano XT M8100-12, 12-Speed (HYPERGLIDE+), 10-51T Chain Guide: Shimano EM800 drive unit mount Brakes: Shimano XT M8120, 4 Pot Brake, Metallic Pads Front Rotor: Shimano SM-RT76, 220mm Rear Rotor: Shimano SM-RT76, 203mm Handlebars: Nukeproof Horizon, S/M: 12mm Rise Width - 780mm, L/XL/XXL: 25mm Rise Width - 800mm Stem: Nukeproof Horizon, 45mm, Black Saddle: Nukeproof, Black Seatpost: Bikeyoke Divine Stealth with Brand-X Remote lever, S:125mm drop; M:160mm drop; XL/XXL:185mm drop Headset: Nukeproof Neutron E-Bike Block Set, sealed bearings, ZS56/28.6 - ZS66/40 Grips: Nukeproof Sam Hill Signature Battery Charger: Shimano E6002 Certification: EN 15194 Compliant Weight: 24.25kg Medium Tubeless Key Information: Material: Hydroformed 6061-T6 Triple-Butted Aluminium Fork Travel: 170mm Axle to Crown: 582mm Fork Offset: 44mm Rear Travel: 170mm Wheels Size: Front: 29" Rear: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 56-66mm Tapered Semi-Integrated Headset: ZS56-28.6 / ZS66/40 (1.5" Tapered) or ZS56-28.6 / ZS66/46 (1.8" Tapered) Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm Motor System: Shimano STEPS EP8, 250W, 85Nm Battery: Can fit either Shimano E8035, 504Wh or Shimano E8036, 630Wh Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Brake Mount: 180mm Direct Post Protection: 3D Contoured Motor Protector and Rubber Frame Protection for DT/SS/CS/Battery DoorPlease NoteThis E-Bike (electric bike) has a max assisted speed of 25 km/h / 15.5 mphEasy AssemblyWhen you order a bike, one of our trained mechanics will carefully prepare and pack your bike for shipping. Upon delivery, the assembly is simple and all necessary tools and plastic pedals are conveniently included in the box.Depending on the delivery service and destination, bikes will either be delivered in a large or a small box. Below is a guide as to how your bike will arrive: All bikes for delivery within the UK and Republic of Ireland will be delivered in a large box, except for balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for delivery within the EU on a standard service will be delivered in a large box. If an express delivery option is chosen, your bike will be packed into a small box. Again, the exception is balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for worldwide delivery outside the EU will be delivered in small boxes.This video demonstrates assembly from a SMALL BOX.This video demonstrates assembly from a LARGE BOX.Please note that due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.Buy Nukeproof Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Megawatt 297 Factory Alloy Bike (XT)The Megawatt 297 Factory Alloy Bike from Nukeproof is designed for the most demanding riders, who want to push their limits as far as possible. This bike features a robust and lightweight frame armed with Fox Factory Kashima coated 170mm-travel suspension forks and a Float X2 rear shock - this combo glides across the roughest terrain with outstanding stability and control. A Shimano STEPS EP8 electric motor drive, Shimano XT M8100 12-Speed groupset and wide-ranging 10-51T cassette gets you up steep climbs and ensures all-day riding efficiency. And it rolls upon DT Swiss H1700 Spline Tubeless Ready enduro wheels wrapped in high-grip Maxxis Assegai Wide Trail Tubeless Ready tyres.This stylish full-suspension electric bike (E-Bike) also has an integrated battery, a Bikeyoke Divine Stealth internally routed dropper seatpost and an aftermarket-quality Nukeproof finishing kit.Since 2009 the Nukeproof Mega has been on a journey of constant development. From iteration to iteration, small incremental improvements gradually add up to become today's thoroughbred Enduro race bike: The Mega V4. All things considered; you could forgive the team for resting on their laurels. Bike design and technology must move fast to keep up with the evolving demands of our customers. If you don't keep up, then you get left behind.The Megawatt is Nukeproof's first E-Bike, and it has won over the media with its agile handling, impressive suspension and balanced geometry. The top priority for Nukeproof was to partner with the right specialist; a brand that could offer leading-edge technology to help create ultra-competitive products whilst having the infrastructure in place to support customers during ownership.Shimano STEPS EP8 Electric Motor Drive Unit Using the latest Shimano STEPS EP8 system, the Megawatt has the torque, range, and performance to wear the Mega name. The Megawatt was developed alongside the latest Mega V4. This ensured that the geometry, packaging and suspension were optimised to perform and held no compromises. The Megawatt exceeds expectations with its descending performance and benefits from the combination of awesome geometry and the Shimano EP8 assistance to climb back to the top for more.Mullet Wheel Standard: 29" Front and 27.5" Rear WheelWhilst humans may not have changed size much in recent years; the bikes they choose to ride most certainly have. To ensure a perfectly dialled fit we now offer the 297 bikes in S, M, L, XL and XXL.With a 29” wheel up front, maximises grip and rolling efficiency whilst the 27.5” wheel out back, allows the bike to run shorter chainstays to ensure nimble handling and maximise manoeuvrability. The rear chainstays also benefit from a 3D moulded chain guard to keep the frame protected and running quiet allowing you to concentrate on the trail ahead.Modern Enduro Inspired Race GeometryLower, longer, steeper and slacker. Our new geometry is now designed around the saddle offset for each size to optimise seated weight distribution. This results in steeper seat angles across the board but especially on larger sizes for taller riders. This in turn results in longer reach figures to ensure a comfortable cockpit on each size. To further aid the perfect fit we have also used shorter seat tubes which are designed to maximise seat post insertion depths. Finally, all new Mega bikes are now designed to use short offset forks to further improve both climbing and descending capabilities.Progressive, Supple and Supportive 4-Bar Horst Suspension PlatformTo step-change the Mega's suspension design we went back to the drawing board and started afresh. We redesigned the Mega 4 bar horst linkage to be super supple over small bumps, progressive and supportive throughout the mid-stoke for support when pedalling, cornering and pumping, with increased end stroke leverage to allow more tuning options with volume spacers. The new kinematic is designed to have higher levels of anti-squat for climbing gears but this reduces as you drop down the cassette. The result is a bike that is more confidence-inspiring everywhere on the hill. It behaves itself on the climbs; yet can still be thrashed through the roughest and most technical terrain on the way back down. The new Mega also has a wide SAG range (30%-35%) to allow you; the rider, to tune the characteristics of the bike to your preferences.Durable and Lightweight Alloy Frame with Internal BatteryThe Megawatt was designed from the outset to optimise the performance of the Shimano EP8 Motor and battery. Crafted from hydroformed 6061 aluminium, the Megawatt shares some characteristics and tube shapes with its Mega sibling but features several notable differences. An all-new one-piece cast Bottom Bracket shell has been engineered to house the Shimano Steps EP8 Motor. The downtube to has been designed to maximise strength and rigidity whilst providing easy access to remove the internal battery for charging or transportation.The Megawatt is offered in three specifications; Comp, Elite or Factory, to suit your riding needs and budget. Please see individual spec's for full details. The Factory and Elite use a 630Wh Shimano battery, whilst the Comp uses a 504Wh battery. Both battery sizes will fit in each model with a secure and easy to flip mount system in all models. All bikes include a Shimano battery charger and adaptor to allow both on bike and off the bike charging using either the Euro or UK charging cables included.Internal Frame Cable Routing Featuring entry points in the frames downtube, the frames downtube has internal routing for the dropper cable, rear brake lines, SD50 wires and gearing. This ensures a more user-friendly E-Bike for general maintenance and upgrading of components. The Megawatt: A Mega V4 with an engine. Designed so you can maximise the amount of time spent descending by getting you back to the top faster, again and again (and again).Please Note: This E-Bike (electric bike) has a max assisted speed of 25 km/h / 15.5 mph Features Frame: Nukeproof Megawatt 297 Alloy, 170mm Travel, custom triple butted hydro-formed tube set, internal Battery, Internal cable routing through downtube, Enduro Bearings, Boost 148mm rear axle spacing, 3D contoured Rubber frame protection, Shimano STEPS compatible. Drive System: Shimano STEPS EP8, 250W, 85Nm Battery: Shimano E8036, 630Wh Display: Shimano EM800 Assist Switch: Shimano EM800-L Fork: Fox 38 Float, 29”, Factory Series, Kashima, Grip 2 Damper, 170mm, 44mm Offset, BOOST, 1.5T Steerer, 68mm Crown, Black Shock: Fox Float X2, Factory Series, Kashima, EVOL, 2 Position lever, Custom LCL LRL tune, 230x62.5mm, Bearing End, 2x 0.3 spacer fitted. Front Wheel: DT Swiss H1700 SPLINE 30, 29", 6 Bolt, 110x15mm Rear Wheel: DT Swiss H1700 SPLINE 30, 27.5", 6 Bolt, Shimano Microspline Driver, 148x12mm Tyres: Front: Maxxis Assegai 29”x2.5 WT 3C MaxxGrip/DD/TR, Rear: Maxxis Assegai 27.5”x2.5 WT 3C MaxxTerra/DD/TR Crankset: Shimano EM8150 XT, HOLLOWTECH II, 165mm, 34T, 52mm Chainline Shifter: Shimano XT M8100-R, 12-speed Rapidfire Plus, I-Spec EV Rear Derailleur: Shimano XT M8100, SGS 12-Speed, Shadow Plus Chain: Shimano XT M8100 HG 12-speed Inc Quicklink Cassette: Shimano XT M8100-12, 12-Speed (HYPERGLIDE+), 10-51T Chain Guide: Shimano EM800 drive unit mount Brakes: Shimano XT M8120, 4 Pot Brake, Metallic Pads Front Rotor: Shimano SM-RT76, 220mm Rear Rotor: Shimano SM-RT76, 203mm Handlebars: Nukeproof Horizon, S/M: 12mm Rise Width - 780mm, L/XL/XXL: 25mm Rise Width - 800mm Stem: Nukeproof Horizon, 45mm, Black Saddle: Nukeproof, Black Seatpost: Bikeyoke Divine Stealth with Brand-X Remote lever, S:125mm drop; M:160mm drop; XL/XXL:185mm drop Headset: Nukeproof Neutron E-Bike Block Set, sealed bearings, ZS56/28.6 - ZS66/40 Grips: Nukeproof Sam Hill Signature Battery Charger: Shimano E6002 Certification: EN 15194 Compliant Weight: 24.25kg Medium Tubeless Key Information: Material: Hydroformed 6061-T6 Triple-Butted Aluminium Fork Travel: 170mm Axle to Crown: 582mm Fork Offset: 44mm Rear Travel: 170mm Wheels Size: Front: 29" Rear: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 56-66mm Tapered Semi-Integrated Headset: ZS56-28.6 / ZS66/40 (1.5" Tapered) or ZS56-28.6 / ZS66/46 (1.8" Tapered) Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm Motor System: Shimano STEPS EP8, 250W, 85Nm Battery: Can fit either Shimano E8035, 504Wh or Shimano E8036, 630Wh Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Brake Mount: 180mm Direct Post Protection: 3D Contoured Motor Protector and Rubber Frame Protection for DT/SS/CS/Battery DoorPlease NoteThis E-Bike (electric bike) has a max assisted speed of 25 km/h / 15.5 mphEasy AssemblyWhen you order a bike, one of our trained mechanics will carefully prepare and pack your bike for shipping. Upon delivery, the assembly is simple and all necessary tools and plastic pedals are conveniently included in the box.Depending on the delivery service and destination, bikes will either be delivered in a large or a small box. Below is a guide as to how your bike will arrive: All bikes for delivery within the UK and Republic of Ireland will be delivered in a large box, except for balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for delivery within the EU on a standard service will be delivered in a large box. If an express delivery option is chosen, your bike will be packed into a small box. Again, the exception is balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for worldwide delivery outside the EU will be delivered in small boxes.This video demonstrates assembly from a SMALL BOX.This video demonstrates assembly from a LARGE BOX.Please note that due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.Buy Nukeproof Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Megawatt 297 Factory Alloy Bike (XT)The Megawatt 297 Factory Alloy Bike from Nukeproof is designed for the most demanding riders, who want to push their limits as far as possible. This bike features a robust and lightweight frame armed with Fox Factory Kashima coated 170mm-travel suspension forks and a Float X2 rear shock - this combo glides across the roughest terrain with outstanding stability and control. A Shimano STEPS EP8 electric motor drive, Shimano XT M8100 12-Speed groupset and wide-ranging 10-51T cassette gets you up steep climbs and ensures all-day riding efficiency. And it rolls upon DT Swiss H1700 Spline Tubeless Ready enduro wheels wrapped in high-grip Maxxis Assegai Wide Trail Tubeless Ready tyres.This stylish full-suspension electric bike (E-Bike) also has an integrated battery, a Bikeyoke Divine Stealth internally routed dropper seatpost and an aftermarket-quality Nukeproof finishing kit.Since 2009 the Nukeproof Mega has been on a journey of constant development. From iteration to iteration, small incremental improvements gradually add up to become today's thoroughbred Enduro race bike: The Mega V4. All things considered; you could forgive the team for resting on their laurels. Bike design and technology must move fast to keep up with the evolving demands of our customers. If you don't keep up, then you get left behind.The Megawatt is Nukeproof's first E-Bike, and it has won over the media with its agile handling, impressive suspension and balanced geometry. The top priority for Nukeproof was to partner with the right specialist; a brand that could offer leading-edge technology to help create ultra-competitive products whilst having the infrastructure in place to support customers during ownership.Shimano STEPS EP8 Electric Motor Drive Unit Using the latest Shimano STEPS EP8 system, the Megawatt has the torque, range, and performance to wear the Mega name. The Megawatt was developed alongside the latest Mega V4. This ensured that the geometry, packaging and suspension were optimised to perform and held no compromises. The Megawatt exceeds expectations with its descending performance and benefits from the combination of awesome geometry and the Shimano EP8 assistance to climb back to the top for more.Mullet Wheel Standard: 29" Front and 27.5" Rear WheelWhilst humans may not have changed size much in recent years; the bikes they choose to ride most certainly have. To ensure a perfectly dialled fit we now offer the 297 bikes in S, M, L, XL and XXL.With a 29” wheel up front, maximises grip and rolling efficiency whilst the 27.5” wheel out back, allows the bike to run shorter chainstays to ensure nimble handling and maximise manoeuvrability. The rear chainstays also benefit from a 3D moulded chain guard to keep the frame protected and running quiet allowing you to concentrate on the trail ahead.Modern Enduro Inspired Race GeometryLower, longer, steeper and slacker. Our new geometry is now designed around the saddle offset for each size to optimise seated weight distribution. This results in steeper seat angles across the board but especially on larger sizes for taller riders. This in turn results in longer reach figures to ensure a comfortable cockpit on each size. To further aid the perfect fit we have also used shorter seat tubes which are designed to maximise seat post insertion depths. Finally, all new Mega bikes are now designed to use short offset forks to further improve both climbing and descending capabilities.Progressive, Supple and Supportive 4-Bar Horst Suspension PlatformTo step-change the Mega's suspension design we went back to the drawing board and started afresh. We redesigned the Mega 4 bar horst linkage to be super supple over small bumps, progressive and supportive throughout the mid-stoke for support when pedalling, cornering and pumping, with increased end stroke leverage to allow more tuning options with volume spacers. The new kinematic is designed to have higher levels of anti-squat for climbing gears but this reduces as you drop down the cassette. The result is a bike that is more confidence-inspiring everywhere on the hill. It behaves itself on the climbs; yet can still be thrashed through the roughest and most technical terrain on the way back down. The new Mega also has a wide SAG range (30%-35%) to allow you; the rider, to tune the characteristics of the bike to your preferences.Durable and Lightweight Alloy Frame with Internal BatteryThe Megawatt was designed from the outset to optimise the performance of the Shimano EP8 Motor and battery. Crafted from hydroformed 6061 aluminium, the Megawatt shares some characteristics and tube shapes with its Mega sibling but features several notable differences. An all-new one-piece cast Bottom Bracket shell has been engineered to house the Shimano Steps EP8 Motor. The downtube to has been designed to maximise strength and rigidity whilst providing easy access to remove the internal battery for charging or transportation.The Megawatt is offered in three specifications; Comp, Elite or Factory, to suit your riding needs and budget. Please see individual spec's for full details. The Factory and Elite use a 630Wh Shimano battery, whilst the Comp uses a 504Wh battery. Both battery sizes will fit in each model with a secure and easy to flip mount system in all models. All bikes include a Shimano battery charger and adaptor to allow both on bike and off the bike charging using either the Euro or UK charging cables included.Internal Frame Cable Routing Featuring entry points in the frames downtube, the frames downtube has internal routing for the dropper cable, rear brake lines, SD50 wires and gearing. This ensures a more user-friendly E-Bike for general maintenance and upgrading of components. The Megawatt: A Mega V4 with an engine. Designed so you can maximise the amount of time spent descending by getting you back to the top faster, again and again (and again).Please Note: This E-Bike (electric bike) has a max assisted speed of 25 km/h / 15.5 mph Features Frame: Nukeproof Megawatt 297 Alloy, 170mm Travel, custom triple butted hydro-formed tube set, internal Battery, Internal cable routing through downtube, Enduro Bearings, Boost 148mm rear axle spacing, 3D contoured Rubber frame protection, Shimano STEPS compatible. Drive System: Shimano STEPS EP8, 250W, 85Nm Battery: Shimano E8036, 630Wh Display: Shimano EM800 Assist Switch: Shimano EM800-L Fork: Fox 38 Float, 29”, Factory Series, Kashima, Grip 2 Damper, 170mm, 44mm Offset, BOOST, 1.5T Steerer, 68mm Crown, Black Shock: Fox Float X2, Factory Series, Kashima, EVOL, 2 Position lever, Custom LCL LRL tune, 230x62.5mm, Bearing End, 2x 0.3 spacer fitted. Front Wheel: DT Swiss H1700 SPLINE 30, 29", 6 Bolt, 110x15mm Rear Wheel: DT Swiss H1700 SPLINE 30, 27.5", 6 Bolt, Shimano Microspline Driver, 148x12mm Tyres: Front: Maxxis Assegai 29”x2.5 WT 3C MaxxGrip/DD/TR, Rear: Maxxis Assegai 27.5”x2.5 WT 3C MaxxTerra/DD/TR Crankset: Shimano EM8150 XT, HOLLOWTECH II, 165mm, 34T, 52mm Chainline Shifter: Shimano XT M8100-R, 12-speed Rapidfire Plus, I-Spec EV Rear Derailleur: Shimano XT M8100, SGS 12-Speed, Shadow Plus Chain: Shimano XT M8100 HG 12-speed Inc Quicklink Cassette: Shimano XT M8100-12, 12-Speed (HYPERGLIDE+), 10-51T Chain Guide: Shimano EM800 drive unit mount Brakes: Shimano XT M8120, 4 Pot Brake, Metallic Pads Front Rotor: Shimano SM-RT76, 220mm Rear Rotor: Shimano SM-RT76, 203mm Handlebars: Nukeproof Horizon, S/M: 12mm Rise Width - 780mm, L/XL/XXL: 25mm Rise Width - 800mm Stem: Nukeproof Horizon, 45mm, Black Saddle: Nukeproof, Black Seatpost: Bikeyoke Divine Stealth with Brand-X Remote lever, S:125mm drop; M:160mm drop; XL/XXL:185mm drop Headset: Nukeproof Neutron E-Bike Block Set, sealed bearings, ZS56/28.6 - ZS66/40 Grips: Nukeproof Sam Hill Signature Battery Charger: Shimano E6002 Certification: EN 15194 Compliant Weight: 24.25kg Medium Tubeless Key Information: Material: Hydroformed 6061-T6 Triple-Butted Aluminium Fork Travel: 170mm Axle to Crown: 582mm Fork Offset: 44mm Rear Travel: 170mm Wheels Size: Front: 29" Rear: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 56-66mm Tapered Semi-Integrated Headset: ZS56-28.6 / ZS66/40 (1.5" Tapered) or ZS56-28.6 / ZS66/46 (1.8" Tapered) Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm Motor System: Shimano STEPS EP8, 250W, 85Nm Battery: Can fit either Shimano E8035, 504Wh or Shimano E8036, 630Wh Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Brake Mount: 180mm Direct Post Protection: 3D Contoured Motor Protector and Rubber Frame Protection for DT/SS/CS/Battery DoorPlease NoteThis E-Bike (electric bike) has a max assisted speed of 25 km/h / 15.5 mphEasy AssemblyWhen you order a bike, one of our trained mechanics will carefully prepare and pack your bike for shipping. Upon delivery, the assembly is simple and all necessary tools and plastic pedals are conveniently included in the box.Depending on the delivery service and destination, bikes will either be delivered in a large or a small box. Below is a guide as to how your bike will arrive: All bikes for delivery within the UK and Republic of Ireland will be delivered in a large box, except for balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for delivery within the EU on a standard service will be delivered in a large box. If an express delivery option is chosen, your bike will be packed into a small box. Again, the exception is balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for worldwide delivery outside the EU will be delivered in small boxes.This video demonstrates assembly from a SMALL BOX.This video demonstrates assembly from a LARGE BOX.Please note that due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.Buy Nukeproof Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Megawatt 297 Alloy Elite Bike (SLX)The Megawatt 297 Alloy Elite Bike from Nukroof gets you up, across the top and down the other side of the mountain with ease. With a Shimano STEPS EP8 electric motor drive and a Shimano SLX 12-Speed groupset, you'll climb quickly and confidently in all riding conditions. The Fox 38 Float Performance Elite suspension fork and a Float X2 rear shock means that the bike is going to absorb bumps from the terrain giving you a comfortable ride with exceptional all-weather traction. It also rolls upon Tubeless Ready Nukeproof Horizon V2 wheels wrapped in Tubeless Ready Maxxis Assegai and High Roller II tyres. Engineered and equipped for riding anywhere on Earth, this full-suspension electric bike (E-Bike) can handle anything you throw at it.Since 2009 the Nukeproof Mega has been on a journey of constant development. From iteration to iteration, small incremental improvements gradually add up to become today’s thoroughbred Enduro race bike: The Mega V4. All things considered; you could forgive the team for resting on their laurels. Bike design and technology must move fast to keep up with the evolving demands of our customers. If you don’t keep up, then you get left behind.The Megawatt is Nukeproof’s first E-Bike, and it has won over the media with its agile handling, impressing suspension and balanced geometry. The top priority for Nukeproof was to partner with the right specialist; a brand that could offer leading edge technology to help create ultra-competitive product whilst having the infrastructure in place to support customers during ownership.Shimano STEPS EP8 Electric Motor Drive UnitUsing the latest Shimano STEPS EP8 system, the Megawatt has the torque, range, and performance to wear the Mega name. The MegaWatt was developed alongside the latest Mega V4. This ensured that the geometry, packaging and suspension was optimised to perform and held no compromises. The Megawatt exceeds expectations with its descending performance and benefits from the combination of awesome geometry and the Shimano EP8 assistance to climb back to the top for more.Mullet Wheel Standard: 29" Front and 27.5" Rear WheelWhilst humans may not have changed size much in recent years; the bikes they choose to ride most certainly have. To ensure a perfectly dialled fit we now offer the 297 bikes in S, M, L, XL and XXL.With a 29” wheel up front, maximises grip and rolling efficiency whilst the 27.5” wheel out back, allows the bike to run shorter chainstays to ensure nimble handling and maximise manoeuvrability. The rear chainstays also benefit from 3d moulded chain guard to keep the frame protected and running quiet allowing you to concentrate on the trail ahead.Modern Enduro Inspired Race GeometryLower, longer, steeper and slacker. Our new geometry is now designed around the saddle offset for each size to optimise seated weight distribution. This results in steeper seat angles across the board but especially on larger sizes for taller riders. This in turn results in longer reach figures to ensure a comfortable cockpit on each size. To further aid the perfect fit we have also used shorter seat tubes which are designed to maximise seat post insertion depths. Finally, all new Mega bikes are now designed to use short offset forks to further improve both climbing and descending capabilities.Progressive, Supple and Supportive 4-Bar Horst Suspension PlatformTo step-change the Mega’s suspension design we went back to the drawing board and started afresh. We redesigned the Mega 4 bar horst linkage to be super supple over small bumps, progressive and supportive throughout the mid stoke for support when pedalling, cornering and pumping, with increased end stroke leverage to allow more tuning options with volume spacers. The new kinematic is designed to have higher levels of anti-squat for climbing gears but this reduces as you drop down the cassette. The result is a bike that is more confidence inspiring everywhere on the hill. It behaves itself on the climbs; yet can still be thrashed through the roughest and most technical terrain on the way back down. The new Mega also has a wide SAG range (30%-35%) to allow you; the rider, to tune the characteristics of the bike to your preferences.Durable and Lightweight Alloy Frame with Internal BatteryThe Megawatt was designed from the outset to optimise the performance of the Shimano EP8 Motor and battery. Crafted from hydroformed 6061 aluminium, the Megawatt shares some characteristics and tube shapes with its Mega sibling but features several notable differences. An all-new one-piece cast Bottom Bracket shell has been engineered to house the Shimano Steps EP8 Motor. The downtube to has been designed to maximise strength and rigidity whilst providing easy access to remove the internal battery for charging or transportation.The Megawatt is offered in three specifications; Comp, Elite or Factory, to suit your riding needs and budget. Please see individual spec’s for full details. The Factory and Elite use a 630Wh Shimano battery, whilst the Comp uses a 504Wh battery. Both battery sizes will fit in each model with a secure and easy to flip mount system in all models. All bikes include a Shimano battery charger and adaptor to allow both on bike and off the bike charging using either the Euro or UK charging cables included.Internal Frame Cable RoutingFeaturing entry points in the frames downtube, the frames downtube has internal routing for the dropper cable, rear brake lines, SD50 wires and gearing. This ensures a more user-friendly E-Bike for general maintenance and upgrading of components.The Megawatt: A Mega V4 with an engine. Designed so you can maximise the amount of time spent descending by getting you back to the top faster, again and again (and again).Please Note: This E-Bike (electric bike) has a max assisted speed of 25 km/h / 15.5 mph.Please Also Note: The product images shown here are representative only, please reference the description for updated cable routing.Nukeproof has created a printable users manual for this bike. It can be downloaded hereFeatures: Frame: Frame: Nukeproof Megawatt 297 Alloy, 170mm Travel, custom triple butted hydro-formed tube set, internal Battery, Internal cable routing through downtube, Enduro Bearings, Boost 148mm rear axle spacing, 3D contoured Rubber frame protection, Shimano STEPS compatible Drive System: Shimano STEPS EP8, 250W, 85Nm Battery: Shimano E8036, 630Wh Display: Shimano EM800 Assist Switch: Shimano EM800-L Fork: Fox 38 Float, 29”, Performance Elite Series, Grip 2 Damper, 170mm, 44mm Offset, BOOST, 1.5T Steerer, 68mm Crown, Black Shock: Fox Float X2, Performance Series, EVOL, 2 Position lever, Custom CL, RM, Rezi CM tune, 230x62.5mm, Bearing End, 2x 0.3 spacer fitted Front Wheel: Nukeproof Horizon V2, 29", 6 Bolt, 110x15mm Rear Wheel: Nukeproof Horizon V2, 27.5", 6 Bolt, Shimano Microspline Driver, 148x12mm Tyres: Front: Maxxis Assegai 29”x2.5 WT 3C MaxxGrip/DD/TR, Rear: Maxxis High Roller II 27.5”x2.5 WT 3C MaxxTerra/DD/TR Crankset: Shimano EM600,165mm, 34T, 52mm Chainline Shifter: Shimano SLX M7100-IR, 12-speed Rapidfire Plus, I-Spec EV Rear Derailleur: Shimano SLX M7100, SGS 12-Speed, Shadow Plus Chain: Shimano SLX M7100 HG 12-speed Inc Quicklink Cassette: Shimano SLX M7100-12, 12-Speed (HYPERGLIDE+), 10-51T Chain Guide: Shimano EM800 drive unit mount Brakes: Shimano SLX M7120, 4 Pot Brake, Metallic Pads Front Rotor: Brakco 220mm Rear Rotor: Brakco, 203mm Handlebars: Nukeproof Horizon V2 25mm Rise, Width - S/M: 12mm Rise Width - 780mm, L/XL/XXL: 25mm Rise Width - 800mm Stem: Nukeproof Horizon, 45mm, Black Saddle: Nukeproof, Black Seatpost: Brand X Ascend internal with Brand-X Remote lever, S:125mm drop; M:150mm drop; L:170mm drop; XL/XXL:200mm drop Headset: Nukeproof Neutron E-Bike Block Set, sealed bearings, ZS56/28.6 - ZS66/40 Grips: Nukeproof Sam Hill Signature Battery Charger: Shimano E6002 Certification: EN 15194 Compliant Weight: 24.6kg (Medium, Tubeless)Specification: Material: Hydroformed 6061-T6 Triple-Butted Aluminium Fork Travel: 170mm Axle to Crown: 582mm Fork Offset: 44mm Rear Travel: 170mm Wheels Size: Front: 29" Rear: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 56-66mm Tapered Semi-Integrated Headset: ZS56-28.6 / ZS66/40 (1.5" Tapered) or ZS56-28.6 / ZS66/46 (1.8" Tapered) - Requires cable routing through top cap Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm Motor System: Shimano STEPS EP8, 250W, 85Nm Battery: Can fit either Shimano E8035, 504Wh or Shimano E8036, 630Wh Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Brake Mount: 180mm Direct Post Protection: 3D Contoured Motor Protector and Rubber Frame Protection for DT/SS/CS/Battery DoorEasy AssemblyWhen you order a bike, one of our trained mechanics will carefully prepare and pack your bike for shipping. Upon delivery, the assembly is simple and all necessary tools and plastic pedals are conveniently included in the box.Depending on the delivery service and destination, bikes will either be delivered in a large or a small box. Below is a guide as to how your bike will arrive: All bikes for delivery within the UK and Republic of Ireland will be delivered in a large box, except for balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for delivery within the EU on a standard service will be delivered in a large box. If an express delivery option is chosen, your bike will be packed into a small box. Again, the exception is balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for worldwide delivery outside the EU will be delivered in small boxes.This video demonstrates assembly from a SMALL BOX.This video demonstrates assembly from a LARGE BOX.Please note that due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.Buy Nukeproof Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Megawatt 297 Alloy Elite Bike (SLX)The Megawatt 297 Alloy Elite Bike from Nukroof gets you up, across the top and down the other side of the mountain with ease. With a Shimano STEPS EP8 electric motor drive and a Shimano SLX 12-Speed groupset, you'll climb quickly and confidently in all riding conditions. The Fox 38 Float Performance Elite suspension fork and a Float X2 rear shock means that the bike is going to absorb bumps from the terrain giving you a comfortable ride with exceptional all-weather traction. It also rolls upon Tubeless Ready Nukeproof Horizon V2 wheels wrapped in Tubeless Ready Maxxis Assegai and High Roller II tyres. Engineered and equipped for riding anywhere on Earth, this full-suspension electric bike (E-Bike) can handle anything you throw at it.Since 2009 the Nukeproof Mega has been on a journey of constant development. From iteration to iteration, small incremental improvements gradually add up to become today’s thoroughbred Enduro race bike: The Mega V4. All things considered; you could forgive the team for resting on their laurels. Bike design and technology must move fast to keep up with the evolving demands of our customers. If you don’t keep up, then you get left behind.The Megawatt is Nukeproof’s first E-Bike, and it has won over the media with its agile handling, impressing suspension and balanced geometry. The top priority for Nukeproof was to partner with the right specialist; a brand that could offer leading edge technology to help create ultra-competitive product whilst having the infrastructure in place to support customers during ownership.Shimano STEPS EP8 Electric Motor Drive UnitUsing the latest Shimano STEPS EP8 system, the Megawatt has the torque, range, and performance to wear the Mega name. The MegaWatt was developed alongside the latest Mega V4. This ensured that the geometry, packaging and suspension was optimised to perform and held no compromises. The Megawatt exceeds expectations with its descending performance and benefits from the combination of awesome geometry and the Shimano EP8 assistance to climb back to the top for more.Mullet Wheel Standard: 29" Front and 27.5" Rear WheelWhilst humans may not have changed size much in recent years; the bikes they choose to ride most certainly have. To ensure a perfectly dialled fit we now offer the 297 bikes in S, M, L, XL and XXL.With a 29” wheel up front, maximises grip and rolling efficiency whilst the 27.5” wheel out back, allows the bike to run shorter chainstays to ensure nimble handling and maximise manoeuvrability. The rear chainstays also benefit from 3d moulded chain guard to keep the frame protected and running quiet allowing you to concentrate on the trail ahead.Modern Enduro Inspired Race GeometryLower, longer, steeper and slacker. Our new geometry is now designed around the saddle offset for each size to optimise seated weight distribution. This results in steeper seat angles across the board but especially on larger sizes for taller riders. This in turn results in longer reach figures to ensure a comfortable cockpit on each size. To further aid the perfect fit we have also used shorter seat tubes which are designed to maximise seat post insertion depths. Finally, all new Mega bikes are now designed to use short offset forks to further improve both climbing and descending capabilities.Progressive, Supple and Supportive 4-Bar Horst Suspension PlatformTo step-change the Mega’s suspension design we went back to the drawing board and started afresh. We redesigned the Mega 4 bar horst linkage to be super supple over small bumps, progressive and supportive throughout the mid stoke for support when pedalling, cornering and pumping, with increased end stroke leverage to allow more tuning options with volume spacers. The new kinematic is designed to have higher levels of anti-squat for climbing gears but this reduces as you drop down the cassette. The result is a bike that is more confidence inspiring everywhere on the hill. It behaves itself on the climbs; yet can still be thrashed through the roughest and most technical terrain on the way back down. The new Mega also has a wide SAG range (30%-35%) to allow you; the rider, to tune the characteristics of the bike to your preferences.Durable and Lightweight Alloy Frame with Internal BatteryThe Megawatt was designed from the outset to optimise the performance of the Shimano EP8 Motor and battery. Crafted from hydroformed 6061 aluminium, the Megawatt shares some characteristics and tube shapes with its Mega sibling but features several notable differences. An all-new one-piece cast Bottom Bracket shell has been engineered to house the Shimano Steps EP8 Motor. The downtube to has been designed to maximise strength and rigidity whilst providing easy access to remove the internal battery for charging or transportation.The Megawatt is offered in three specifications; Comp, Elite or Factory, to suit your riding needs and budget. Please see individual spec’s for full details. The Factory and Elite use a 630Wh Shimano battery, whilst the Comp uses a 504Wh battery. Both battery sizes will fit in each model with a secure and easy to flip mount system in all models. All bikes include a Shimano battery charger and adaptor to allow both on bike and off the bike charging using either the Euro or UK charging cables included.Internal Frame Cable RoutingFeaturing entry points in the frames downtube, the frames downtube has internal routing for the dropper cable, rear brake lines, SD50 wires and gearing. This ensures a more user-friendly E-Bike for general maintenance and upgrading of components.The Megawatt: A Mega V4 with an engine. Designed so you can maximise the amount of time spent descending by getting you back to the top faster, again and again (and again).Please Note: This E-Bike (electric bike) has a max assisted speed of 25 km/h / 15.5 mph.Please Also Note: The product images shown here are representative only, please reference the description for updated cable routing.Nukeproof has created a printable users manual for this bike. It can be downloaded hereFeatures: Frame: Frame: Nukeproof Megawatt 297 Alloy, 170mm Travel, custom triple butted hydro-formed tube set, internal Battery, Internal cable routing through downtube, Enduro Bearings, Boost 148mm rear axle spacing, 3D contoured Rubber frame protection, Shimano STEPS compatible Drive System: Shimano STEPS EP8, 250W, 85Nm Battery: Shimano E8036, 630Wh Display: Shimano EM800 Assist Switch: Shimano EM800-L Fork: Fox 38 Float, 29”, Performance Elite Series, Grip 2 Damper, 170mm, 44mm Offset, BOOST, 1.5T Steerer, 68mm Crown, Black Shock: Fox Float X2, Performance Series, EVOL, 2 Position lever, Custom CL, RM, Rezi CM tune, 230x62.5mm, Bearing End, 2x 0.3 spacer fitted Front Wheel: Nukeproof Horizon V2, 29", 6 Bolt, 110x15mm Rear Wheel: Nukeproof Horizon V2, 27.5", 6 Bolt, Shimano Microspline Driver, 148x12mm Tyres: Front: Maxxis Assegai 29”x2.5 WT 3C MaxxGrip/DD/TR, Rear: Maxxis High Roller II 27.5”x2.5 WT 3C MaxxTerra/DD/TR Crankset: Shimano EM600,165mm, 34T, 52mm Chainline Shifter: Shimano SLX M7100-IR, 12-speed Rapidfire Plus, I-Spec EV Rear Derailleur: Shimano SLX M7100, SGS 12-Speed, Shadow Plus Chain: Shimano SLX M7100 HG 12-speed Inc Quicklink Cassette: Shimano SLX M7100-12, 12-Speed (HYPERGLIDE+), 10-51T Chain Guide: Shimano EM800 drive unit mount Brakes: Shimano SLX M7120, 4 Pot Brake, Metallic Pads Front Rotor: Brakco 220mm Rear Rotor: Brakco, 203mm Handlebars: Nukeproof Horizon V2 25mm Rise, Width - S/M: 12mm Rise Width - 780mm, L/XL/XXL: 25mm Rise Width - 800mm Stem: Nukeproof Horizon, 45mm, Black Saddle: Nukeproof, Black Seatpost: Brand X Ascend internal with Brand-X Remote lever, S:125mm drop; M:150mm drop; L:170mm drop; XL/XXL:200mm drop Headset: Nukeproof Neutron E-Bike Block Set, sealed bearings, ZS56/28.6 - ZS66/40 Grips: Nukeproof Sam Hill Signature Battery Charger: Shimano E6002 Certification: EN 15194 Compliant Weight: 24.6kg (Medium, Tubeless)Specification: Material: Hydroformed 6061-T6 Triple-Butted Aluminium Fork Travel: 170mm Axle to Crown: 582mm Fork Offset: 44mm Rear Travel: 170mm Wheels Size: Front: 29" Rear: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 56-66mm Tapered Semi-Integrated Headset: ZS56-28.6 / ZS66/40 (1.5" Tapered) or ZS56-28.6 / ZS66/46 (1.8" Tapered) - Requires cable routing through top cap Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm Motor System: Shimano STEPS EP8, 250W, 85Nm Battery: Can fit either Shimano E8035, 504Wh or Shimano E8036, 630Wh Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Brake Mount: 180mm Direct Post Protection: 3D Contoured Motor Protector and Rubber Frame Protection for DT/SS/CS/Battery DoorEasy AssemblyWhen you order a bike, one of our trained mechanics will carefully prepare and pack your bike for shipping. Upon delivery, the assembly is simple and all necessary tools and plastic pedals are conveniently included in the box.Depending on the delivery service and destination, bikes will either be delivered in a large or a small box. Below is a guide as to how your bike will arrive: All bikes for delivery within the UK and Republic of Ireland will be delivered in a large box, except for balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for delivery within the EU on a standard service will be delivered in a large box. If an express delivery option is chosen, your bike will be packed into a small box. Again, the exception is balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for worldwide delivery outside the EU will be delivered in small boxes.This video demonstrates assembly from a SMALL BOX.This video demonstrates assembly from a LARGE BOX.Please note that due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.Buy Nukeproof Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.