It’s also covered in a one-piece, 100% waterproof cover for consistent comfort in all conditions. Additionally, it’s also equipped with a coil suspension system to absorb sudden vibrations and shocks from poor road surfaces. Subtle graphics and black bumpers give it an understated looks that will suit any bike colour scheme.
In addition to the supportive shape and padding, there’s also a long central cut-out to relieve pressure from sensitive areas. It’s male-specific and suitable for everything from XC, enduro or road riding. Plus, its durable, one-piece cover helps the comfort to remain consistent even in changeable weather.
With its female-specific shape, waterproof cover and flexible rails, Brand-X has ensured the comfort saddle provides consistent comfort in all weather conditions and over varying terrains. Subtle styling and black components ensure this saddle will suit any city or trekking bike.
The BORG 26 All Weather wheelset provides guaranteed reliability in all conditions. The wheels are built with high mileage riders in mind and therefore are suitable for all types of riders. Those that ride in the foulest of conditions and simply need dependable wheels will love these wheels from BORG. Dependable does not have to heavy though. The BORG 26 have every detail covered. A robust all-weather wheelset for rim brakesStiff yet comfortableTriple butted Sapim spokesShimano8/9/10/11 speed, SRAM AXS 12 speed or Campagnolo 9/10/11/12 speed freehub24mm wide tubeless tyre ready rims (tubed tyre compatible also)26mm deep rimsLife of the rim warrantyWeight from 1760g 32 spoke with Campagnolo hubsBlack hub, rim and spokesMiche Primato HubsThe wheels are hand built in the BORG shop. They are mainly used as an all-weather training wheelset. The rims are not expensive if they need to be replaced which is unlikely and the hubs, well they love the wet. Bearing life is long in all conditions. The rim is 24mm wide and 26mm deep. It weighs 475g. The rear rim has offset drilling for increased NDS spoke tension (this is a good thing for spoke life). The internal width of this rim is 19mm and it has a 2mm thick spoke nipple bed. All tyres will sit wider on this rim than they would on a narrower one. This improves rider comfort due to the increased air volume and due to the different tyre shape handling in the bends particularly over broken road surfaces is improved. These wheels are robust, and the rims are low cost meaning they are perfect training wheels and ideal for wet weather/winter use. They are supplied tubeless ready with tubeless tape and valves. Tubed tyres can of course be fitted and are an easy fit. Even Schwalbe Marathons fit with ease. Please note that the images are for illustration purposes only.
Hand built by Malcolm Borg the BORG22 wheelset is the perfect choice for high mileage riders who ride in all conditions no matter what the weather.24mm wide tubeless ready Kinlin rims (also compatible with tubes)Triple butted Sapim spokesBig cartridge bearing hubs that are easy to serviceLife of the rim warrantyShimano or Campagnolo freehubWeight: 1646g (approx)The BORG22 has been hand built around a 24mm wide and 22mm deep Kinlin rim that has an internal width of 19mm and a 2mm thick spoke nipple bed. The rims are tubeless ready and come with tubeless tape, valves and IRC tyre levers. The rims have been built with 24 black Sapim laser spokes at the front and 28 black Sapim force spokes at the rear. Sapim black self locking alloy nipples are used and Sapim HM nipple washers are also utilised.To ensure the best value, performance and durability the BORG22 wheels use Miche Primato hubs. The bearings are 2x6001 C3 in both the front and rear hub shells. The rear freehub has 2x 6901 bearings. The axles front and rear are 12mm diameter and made of steel. The front and rear hub are a free axle design making disassembly really simple. Both the front and rear hub have a bearing preload adjuster which should be set once the wheels are installed in the bike. Simply reliable wheels that benefit from life of the rim guarantee against going out of true/spoke failure, rim cracking (but not rim damage) and hub flange cracking. Please note the wheelset has a rider weight limit of 100kg.Whats included:Wheelset front and rear with Sapim spokes/nipples and Miche hubsTubeless rim tapeTubeless valvesQR SkewersThe best guarantee (for the life of the rim against spoke failure and anything that could be termed a defect)
Hand built by Malcolm Borg the BORG31 wheelset is a semi aero, very stiff wheelset based on a wide rim which is perfect for all weather training use, road racing or CX use.A robust all weather race orientated wheelset24mm wide and 31mm deep tubeless ready rims (also compatible with tubes)20 spoke front and 24 spoke rearMiche Primato hubs for reliabilityLife of the rim warrantyWeight (1655g (approx)The BORG31 has been built around a 24mm wide and 31mm deep Kinlin rim with an internal width of 19mm. The rear rim is offset (asymmetric) which increases non drive spoke tension, which is a useful way of increasing spoke life. The rims are tubeless ready and come with tubeless tape, valves and IRC tyre levers. The rims have been built with 20 black Sapim CX-ray spokes at the front and 24 black Sapim CX-force spokes at the rear with black alloy SILS (self locking nipples). The Cx-force spokes have a thicker elbow than most spokes (triple butted) this means longer spoke life.To ensure the best value, performance and durability the BORG22 wheels use Miche Primato hubs. The bearings are 2x6001 C3 in both the front and rear hub shells. The rear freehub has 2x 6901 bearings. The axles front and rear are 12mm diameter and made of steel. The front and rear hub are a free axle design making disassembly really simple. Both the front and rear hub have a bearing preload adjuster which should be set once the wheels are installed in the bike. Simply a reliable wheelset for all weathers and combined with the right tyre it could be the only wheelset you need.Whats included:Wheelset front and rear with Sapim CX- ray and CX-Force aero spokesTubeless rim tapeBlack alloy tubeless valvesQR skewers for Miche and Shimano hubsThe best guarantee (for the life of the rim against spoke failure and anything that could be termed a defect)
The BORG 22 Light Wheelset is hand built by Malcolm Borg and are a light, tubeless ready wheelset for riders who want a tough but lightweight wheelset. They differ from the standard BORG22 wheels in that they have lighter hubs and spokes.Kinlin XR22T/RT rims which are made from Kinlin's aluminium, niobium alloyCarbon Ti hubsShimano 8/9/10/11 speed freehub, SRAM XDR road and Campagnolo 9/10/11 speed freehub bodies available for both hubs.Tubeless rim tape and black alloy tubeless valves are supplied so the wheels are tubeless ready.Shimano 8/9/10/11 speed freehub, SRAM XDR road and Campagnolo 9/10/11 speed freehub bodies available for both hubs.The rim is a Kinlin XR22T/RT which is made from Kinlin's aluminium, niobium alloy. The wheels are compatible with tubed tyres too. The rim is 24mm wide and 22mm deep. It weighs 440g. The rear rim has offset drilling for increased NDS spoke tension (this is a good for spoke life). The internal width of this rim is 19mm and it has a 2mm thick spoke nipple bed. All tyres will sit wider on this rim than they would on a narrower one. This improves rider comfort due to the increased air volume and due to the different tyre shape handling in the bends particularly over broken road surfaces is improved. 24F/28R Black straight pull CX rays front and Sapim CX sprint spokes rear - 100/130mm OLD. Sapim CX Sprint spokes are used for the rear for increased radial, lateral and torsional stiffness over using Sapim CX rays which also means longer spoke life. These wheels are built with Carbon Ti hubs with a freehub that has 4 pawls. The bearing used are of a standard industrial size (6903/6803 in the rear hub shell). They are light but reliable hubs with 56points of engagement. The ratchet ring is titanium.Simply light, stiff and reliable wheels that benefit from The Cycle Clinic life of the rim guarantee against going out of true/spoke failure, rim cracking (but not rim damage) and hub flange cracking.In the box:Wheelset front and rear with Sapim aero spokes and nipples.Tubeless rim tapeBlack alloy tubeless valvesThe best guarantee (for the life of the rim against spoke failure and anything that could be termed a defect) i.e. problems fixed at my cost not yours.Please note QR skewers are not included
A Suit That Delivers New leg paneling delivers faster transition splits. Add to that a low neckline and VO2 chest panel, and you’ve got a suit that delivers everything you need in training and racing - minus the arms, of course. Technologies And What Makes This The Best Reaction Yet REACTIVE STRETCH TECHNOLOGY (RST) - Further enhanced with ultra stretch jersey, the RST panels improve arm mobility, reach and propulsion. S-FLEX - 2mm thin side panels improve fit and body rotation in the water without sacrificing buoyancy. VO2 CHEST PANEL - A central split chest panel allows greater chest expansion and unimpeded breathing. LOWERED COLLAR - Over twenty years of wetsuit design experience has made our traditional zipper an industry standard. Our curved closure flap reduces rear collar height, improving comfort and reducing chafing. Also features an easy-access key loop. QUICK EXIT LEGS - 2mm lower leg panels maximize the flexibility and promote a quick release from your suit in transition. Taping on the internal seams is reinforced and allows you to cut the leg to the desired length. BUOYANCY - The Reaction features a 4-5-4 panel design centralizing core buoyancy to raise the position of the hips in relation to the rest of the body. Two 4mm chest panels accent natural lung buoyancy to optimize upper body position relative to the legs. 5mm neoprene supports the hips and lower torso, lifting the body in the water, reducing drag and improving speed. 5mm panels in the back of the hips are orientated to facilitate a raised body position when you roll to the side during breathing. FLEXIBILITY - Highly flexible 100% nylon ultra stretch jersey is lighter and features 35% improvement in elongation compared to standard jersey. "
Bluegrass Seamless Body Armour D3O®Take your mountain bike protection to the next level with the unisex Bluegrass Seamless Body Armour D3O®. Fitting like a second-skin and featuring D3O® padding, it gives superb flexibility, comfort and protection.When you're riding your mountain bike you want to remain as nimble and free to move as possible. But there's also the desire to be protected on particularly challenging trails and terrain. And with the Seamless Body Armour D3O® you have the best of both. Seamless ConstructionThanks to a seamless construction, featuring zones of open mesh for ventilation, this body armour top achieves an incredibly comfortable and flexible fit. With it's high-degree of stretch, it accommodates a wide range of body sizes and shapes. It's also suitable for both male and female mountain bikers. D3O® Body ArmourFlexible D3O® padding is used across the back and shoulders, providing shock-absorbing protection should you be unfortunate to crash. The beauty of the D3O® protectors is they remain highly flexible in normal use, but upon impact stiffen to provide reliable protection. Ideal for mountain biking where you want to remain as mobile as possible but highly protected. DRYARN® MicrofibreMade from 90% Dryarn® microfiber, and being some 30% lighter than traditional fabrics, you'll enjoy a smooth fit that is barely noticeable under your MTB jersey. It's also incredibly good at regulating temperature, wicking away moisture to the outside and drying quickly to maintain freshness. Talking of which, it's also bacteria and odour resistant.Ready to RideIf you need some extra storage space, this base layer protector features two rear pockets, ideal to stash a few small spares or some energy bars to keep you fuelled up. The long length also gives a smooth fit with your shorts or trousers. Care instructions:Hand wash only. Use only mild soap and water to clean your protector. PAdding is removable to allow easy care. Features:Materials: 80% Polypropylene, 10% Polyamide, 10% ElastaneBack protector D3O® BP4 L1 (removable) - Shoulder protectors D3O® T5 EVO X L1 (removable) - D3O® inserts compliant with EN 1621-2:2014Unisex seamless construction ensures adherent and ergonomic fit to accommodate all body shapesDryarn® microfiber guarantees the highest level of next-to-skin performanceOpen mesh enhance ventilation and sweat evaporationQuick-drying microfiber works to regulate body temperatureDermatologically tested microfiber to eliminate bacteria and odourStable shoulder shells compatible with backpack strapsTwo rear pockets for snacks and soft itemsLong length bottom fits into MTB pants maximising stabilityBuy Bluegrass Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
Bluegrass Seamless Body Armour D3O®Take your mountain bike protection to the next level with the unisex Bluegrass Seamless Body Armour D3O®. Fitting like a second-skin and featuring D3O® padding, it gives superb flexibility, comfort and protection.When you're riding your mountain bike you want to remain as nimble and free to move as possible. But there's also the desire to be protected on particularly challenging trails and terrain. And with the Seamless Body Armour D3O® you have the best of both. Seamless ConstructionThanks to a seamless construction, featuring zones of open mesh for ventilation, this body armour top achieves an incredibly comfortable and flexible fit. With it's high-degree of stretch, it accommodates a wide range of body sizes and shapes. It's also suitable for both male and female mountain bikers. D3O® Body ArmourFlexible D3O® padding is used across the back and shoulders, providing shock-absorbing protection should you be unfortunate to crash. The beauty of the D3O® protectors is they remain highly flexible in normal use, but upon impact stiffen to provide reliable protection. Ideal for mountain biking where you want to remain as mobile as possible but highly protected. DRYARN® MicrofibreMade from 90% Dryarn® microfiber, and being some 30% lighter than traditional fabrics, you'll enjoy a smooth fit that is barely noticeable under your MTB jersey. It's also incredibly good at regulating temperature, wicking away moisture to the outside and drying quickly to maintain freshness. Talking of which, it's also bacteria and odour resistant.Ready to RideIf you need some extra storage space, this base layer protector features two rear pockets, ideal to stash a few small spares or some energy bars to keep you fuelled up. The long length also gives a smooth fit with your shorts or trousers. Care instructions:Hand wash only. Use only mild soap and water to clean your protector. PAdding is removable to allow easy care. Features:Materials: 80% Polypropylene, 10% Polyamide, 10% ElastaneBack protector D3O® BP4 L1 (removable) - Shoulder protectors D3O® T5 EVO X L1 (removable) - D3O® inserts compliant with EN 1621-2:2014Unisex seamless construction ensures adherent and ergonomic fit to accommodate all body shapesDryarn® microfiber guarantees the highest level of next-to-skin performanceOpen mesh enhance ventilation and sweat evaporationQuick-drying microfiber works to regulate body temperatureDermatologically tested microfiber to eliminate bacteria and odourStable shoulder shells compatible with backpack strapsTwo rear pockets for snacks and soft itemsLong length bottom fits into MTB pants maximising stabilityBuy Bluegrass Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
When you're riding your mountain bike you want to remain as nimble and free to move as possible. But there's also the desire to be protected on particularly challenging trails and terrain. And with the Seamless Body Armour D3O® you have the best of both. Seamless Construction Thanks to a seamless construction, featuring zones of open mesh for ventilation, this body armour top achieves an incredibly comfortable and flexible fit. With it's high-degree of stretch, it accommodates a wide range of body sizes and shapes. It's also suitable for both male and female mountain bikers. D3O® Body Armour Flexible D3O® padding is used across the back and shoulders, providing shock-absorbing protection should you be unfortunate to crash. The beauty of the D3O® protectors is they remain highly flexible in normal use. However, upon impact, they stiffen to provide reliable protection. Ideal for mountain biking where you want to remain as mobile as possible but highly protected. DRYARN® Microfibre Made from 90% Dryarn® microfiber, and being some 30% lighter than traditional fabrics, you'll enjoy a smooth fit that is barely noticeable under your MTB jersey. It's also incredibly good at regulating temperature, wicking away moisture to the outside and drying quickly to maintain freshness. Talking of which, it's also bacteria and odour resistant. Ready to Ride If you need some extra storage space, this base layer protector features two rear pockets, ideal to stash a few small spares or some energy bars to keep you fuelled up. The long length also gives a smooth fit with your shorts or trousers. Care instructions: Hand wash only. Use only mild soap and water to clean your protector. PAdding is removable to allow easy care.
Blank Timeless Seat & Post ComboThe Timeless Seat & Post Combo from Blank has a distinctive style with a hard-wearing kevlar cover and offers you outstanding value for money. With its integrated design, it can be fitted in seconds and with its fat profile and generous padding you'll be cruising the streets not just with style, but with plenty of comfort too.Features: Hard wearing "Timeless" Kevlar saddle cover Fat profile with extra padding Combo seat/post design Integrated 200mm long seatpostBuy Blank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.