Instructions: Thread the star nut onto the internal bar then feed the bar through the outer sleeve Place the sleeve over your steerer tube and gently hammer into place until the internal bar's lip is flat to the steerer tube.
The LifeLine Headset Cup Remover is simple to use and makes headset removal quick without damaging your frame. Instructions Start by securing your frame or bike in a workstand. Feed the closed end through the steerer tube until the splayed end opens inside the steerer tube. Make sure the splayed end of the tool is sat on the lip of the cup and hammer the cup out. When removing the tool follow the closed end down to protect the tool and repeat with the remaining cup. Tip: when hammering the cup out use a rag to catch the cup instead of sending it across the room.
It's strong enough for downhill use, yet still light enough for cross-country, this Hope Conventional Headset includes custom-made stainless steel bearings (which are replaceable). The cups, taper ring and crown race (which is split for easy installation and removal) are all machined from 2014 T6 aluminium. It is also possible to fit a standard 1.1/8" steerer using an additional conversion crown (sold separately). All Hope headsets come complete with the Head Doctor. This Hope EC34 Headset also has advanced sealing that's achieved through an adjustable taper ring cover and integrated rubber seal. The bearings also incorporate their own sealing and are made from stainless steel to resist corrosion - a real advantage over a conventional steel bearing.
Hope Pick and Mix headset cups and bearings are sold as individual top or bottom components. They are ideal for building up frames with tapered head tubes, converting frames with larger head tubes to fit standard fork steerers or for replacing damaged cups/bearings individually. There are 6 top cup options and 8 bottom cup options to choose from, these are designed to fit modern road and mountain bike frames; older 1” and threaded standards are not included. Hope Pick And Mix Headset cups/bearings are available for three headset standards; External, Integral and Integrated. Please refer to the guide below to choose the right size and standard for your frame and fork. Type 1: EC34/28.6 1 1/8" Traditional Top Type 2: ZS44/28.6 1 1/8" Integral Top Type 3: IS41/28.6 1 1/8" Integrated Top Type 4: ZS49/28.6 1.5" to 1 1/8" Step-down Integral Top Type 5: ZS56/38.1 1.5" Integral Top Type 6: EC49/38.1 1.5" External Top Type 8: IS42/28.6 1 1/8" Integrated Top Type A: EC34/30 1 1/8" Traditional Bottom Type B: ZS44/30 1 1/8" Integral Bottom Type C: IS41/30 1 1/8" Integrated Bottom Type D: ZS49/30 1.5" to 1 1/8" Step-down Low Stack Integral Bottom Type E: ZS56/40 1.5" Integral Bottom Type F: EC49/40 1.5" Integral/External Bottom - (49mm internal headtube diameter) Type G: ZS55/40 1.5" Integral Bottom - (Scott/Lapierre) Type H: EC44/40 1.5" Traditional Bottom - (44mm internal headtube diameter) https://www.hopetech.com/_repository/1/documents/Hope-Upper-Headset-Compatibility-Chart.pdf https://www.hopetech.com/_repository/1/documents/Hope-Lower-Headset-Compatibility-Chart.pdf
The two aluminium wedges of the strong and reliable Hope Head Doctor simply pull together and expand inside any 1.1/8" fork steerer tube, giving you a solid thread to pull the stem down.
Made from tough and durable 2014 aluminium, the four sizes in the Hope Space Doctor Headset spacers pack include two 5mm, one 10mm and one 20mm size. This enables you to run a low and slammed setup (ideal for road racing or cross country (XC) riding) or a more upright setup (ideal for road endurance, all mountain (AM) or enduro riding). The colouring and finish on these custom machined head spacers complement Hope's headsets and stems perfectly.
FSA headsets are carefully engineered and updated to deliver the highest performance and value. New for the autumn is an expanded range of the ever popular Orbit MX headset. The Orbit MX offers 36° angular contact bearings for smooth running and aluminium cups to keep the weight down to an impressive 96g. As with all Full Speed Ahead products the Orbit MX is fully supported with replacement spare parts and a full two year warranty. Headset Guide click here
The InsetTM 3 is designed to fit a 1 1/8" to 1.5" tapered steerer tubed fork and a 44mm to 49mm internal diameter tapered headtube on the bike. Supplied with an all-new bearing cap design, the GripLock™ is a multi-piece bearing cap that utilizes a precision controlled split ring that improves steerer tube interface. Aluminum cups in 10 available colors house our legendary bearings; all made in-house in our Portland, Oregon facility. InSet™ is the unrivaled upgrade for all riding styles. Check out the Chris King Size chartClick here to enlarge.
The Inset 3 is designed to fit a 1 1/8" to 1.5" tapered steerer tubed fork and a 44mm to 56mm internal diameter tapered headtube on the bike. Supplied with an all-new bearing cap design, the GripLock™ is a multi-piece bearing cap that utilizes a precision controlled split ring that improves steerer tube interface. Aluminium cups in 10 available colours house our legendary bearings; all made in-house in our Portland, Oregon facility. InSet is the unrivalled upgrade for all riding styles. Check out the Chris King Size chart Click here to enlarge.
Complete the ultimate Hope cockpit with this high-quality top cap. Bolt not included
An excellent set to let you position your steering column at an optimal height, this Deda spacer is available in various sizes to maximise comfort and positioning on every ride.