Fizik Cyrano R1 Road HandlebarThe Cyrano R1 is the mid-range handlebar from fi'zi:k. Made from uni-directional carbon, this is both strong and lightweight.Just as your choice of fi'zi:k Spine Concept saddle shape is guided by your degree of spinal flexibility and subsequent pelvic rotation, fi'zi:k offers this same Spine Concept guideline to help you choose your most comfortable road handlebar shape.These products are being ridden at UCI World Tour level by AG2R Pro Cycling Team.The application of The Spine Concept to handlebar shape is the result of fi'zi:k's research with riders of 3 UCI World Tour Teams that were riding fi'zi:k saddles. A correlation was found between the saddle shape each rider was using and the handlebar shape they were riding.Handlebar Options:Your shoulders' width should determine your handlebar width. Choose from the following centre-centre measurements: 400/420/440/460mm. The Snake Handlebar: If you are very spinally flexible (far less than 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders' width apart), you are a Snake. You are better able to reach further and get down lower to use the full radius of more rounded, classic-style, deeper-drop handlebars. You will prefer the Snake Handlebar because it has a longer reach and deeper, classic-style drop. The Chameleon Handlebar: If you have an intermediate degree of spinal flexibility (approximately 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders' width apart), you are a chameleon. You are better able to reach further, but perhaps you can't get down quite as low on the handlebar drops as a Snake would be able to.You will prefer the Chameleon Handlebar because it has a longer reach but a shallower, more ergonomic-style drop. The Bull Handlebar: If you have a relatively low degree of spinal flexibility (more than 90 degrees between your straight legs and back when bending over as far as you can, keeping your legs straight a shoulders' width apart), you are a Bull. You will not be able to reach as far or bend as low as a Snake or a Chameleon would be able to.You will prefer the Bull Handlebar because it has a shorter reach and a shallower, more ergonomic-style handlebar drop. Features:Material: Uni-Directional Carbon Flare of Drops: 3 degreesGraphics on both sides to mark where STIs should be placedGraphics on both sides to mark where to finish wrapping bar tape Weight: 205g (size 420mm, centre to centre) Its design is a perfect complement with:-Fizik Cyrano R1 Seatpost.Fizik Cyrano R1 Stem.Buy Fizik Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fizik Cyrano R1 Road HandlebarThe Cyrano R1 is the mid-range handlebar from fi'zi:k. Made from uni-directional carbon, this is both strong and lightweight.Just as your choice of fi'zi:k Spine Concept saddle shape is guided by your degree of spinal flexibility and subsequent pelvic rotation, fi'zi:k offers this same Spine Concept guideline to help you choose your most comfortable road handlebar shape.These products are being ridden at UCI World Tour level by AG2R Pro Cycling Team.The application of The Spine Concept to handlebar shape is the result of fi'zi:k's research with riders of 3 UCI World Tour Teams that were riding fi'zi:k saddles. A correlation was found between the saddle shape each rider was using and the handlebar shape they were riding.Handlebar Options:Your shoulders' width should determine your handlebar width. Choose from the following centre-centre measurements: 400/420/440/460mm. The Snake Handlebar: If you are very spinally flexible (far less than 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders' width apart), you are a Snake. You are better able to reach further and get down lower to use the full radius of more rounded, classic-style, deeper-drop handlebars. You will prefer the Snake Handlebar because it has a longer reach and deeper, classic-style drop. The Chameleon Handlebar: If you have an intermediate degree of spinal flexibility (approximately 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders' width apart), you are a chameleon. You are better able to reach further, but perhaps you can't get down quite as low on the handlebar drops as a Snake would be able to.You will prefer the Chameleon Handlebar because it has a longer reach but a shallower, more ergonomic-style drop. The Bull Handlebar: If you have a relatively low degree of spinal flexibility (more than 90 degrees between your straight legs and back when bending over as far as you can, keeping your legs straight a shoulders' width apart), you are a Bull. You will not be able to reach as far or bend as low as a Snake or a Chameleon would be able to.You will prefer the Bull Handlebar because it has a shorter reach and a shallower, more ergonomic-style handlebar drop. Features:Material: Uni-Directional Carbon Flare of Drops: 3 degreesGraphics on both sides to mark where STIs should be placedGraphics on both sides to mark where to finish wrapping bar tape Weight: 205g (size 420mm, centre to centre) Its design is a perfect complement with:-Fizik Cyrano R1 Seatpost.Fizik Cyrano R1 Stem.Buy Fizik Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank Spike 777 FR Bearclaw Riser HandlebarSpank's collaboration with such a respected pro has resulted in a handlebar that is extremely low in weight, but also has an unprecedented stiffness and durability to ensure it can handle the extreme jumps, flips and drops of Freeriding.Due to the ever increasing demand for wider and lighter bars for more aggressive riding styles, Spank has developed the Dual XGT (Extreme Gradual Taper) technology with Impact Ends. The Spike 777 FR Bearclaw benefits from this Dual XGT technology, which enables extreme precision during manufacture for consistent wall thickness. Spank has optimised the spread of material to counter high stress areas on the bars under extreme use through FEA (Finite Element Analysis) and rigorous real-world testing. The Impact Ends reduce the chance of collapse in areas where the wall is thinner and in heavy impacts.Features: Material: Work-hardened 2-series Alloy (20% stronger than 777 EVO) Diameter: 31.8mm Length: 777mm Upsweep: 4 deg Backsweep: 8 deg Dual XGT Taper Technology with impact ends Reinforced, shot-peened clamp area Weight: 310gBuy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank Spike 35 Vibrocore™ Riser HandlebarsThe Oozy 760 LTD Vibrocore Riser Bar is a big and burly Downhill (DH) and Freeride bar that’s stiffer, stronger, and easily absorbs vibration for a smoother journey, no matter what the terrain. These qualities are thanks to the Vibrocore™ injected proprietary foam, help to reduce arm fatigue and hand numbness so you can just concentrate on the path ahead.Features: Material: Zirconium Doped 7-Series Alloy Finish: Shot peen-anodized Width: 820mm Rise: 25° Geometry: 5° Upsweep/8° Backsweep Key Technologies: Vibrocore™, Dual XGT, CNC Bending, MGR, Big-Taper (105mm) design Adjustable to 760mm (cut guides at ends of bar) Vibrocore Impulse & Vibration Dampening Core Impact ends Use: Downhill and Freeride Weight: 300gTechnologies:Vibrocore™ Technology: Alloys have a very high density, and in turn transmit vibrational energy very effectively. Vibrocore is a complex, low-density material that fills the core of the handlebar, reducing the frequency, amplitude, and duration of energy waves. Where competitors have been forced to design unwanted flexibility into their bars, Spank's Vibrocore system also acts to reinforce the handlebar from the inside, resulting in a more responsive performance and improved sensitivity. The result is a handlebar that feels incredibly strong and rigid and acts to reduce impulse and vibrational fatigue.Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank Spike 35 Vibrocore™ Riser HandlebarsThe Oozy 760 LTD Vibrocore Riser Bar is a big and burly Downhill (DH) and Freeride bar that’s stiffer, stronger, and easily absorbs vibration for a smoother journey, no matter what the terrain. These qualities are thanks to the Vibrocore™ injected proprietary foam, help to reduce arm fatigue and hand numbness so you can just concentrate on the path ahead.Features: Material: Zirconium Doped 7-Series Alloy Finish: Shot peen-anodized Width: 820mm Rise: 25° Geometry: 5° Upsweep/8° Backsweep Key Technologies: Vibrocore™, Dual XGT, CNC Bending, MGR, Big-Taper (105mm) design Adjustable to 760mm (cut guides at ends of bar) Vibrocore Impulse & Vibration Dampening Core Impact ends Use: Downhill and Freeride Weight: 300gTechnologies:Vibrocore™ Technology: Alloys have a very high density, and in turn transmit vibrational energy very effectively. Vibrocore is a complex, low-density material that fills the core of the handlebar, reducing the frequency, amplitude, and duration of energy waves. Where competitors have been forced to design unwanted flexibility into their bars, Spank's Vibrocore system also acts to reinforce the handlebar from the inside, resulting in a more responsive performance and improved sensitivity. The result is a handlebar that feels incredibly strong and rigid and acts to reduce impulse and vibrational fatigue.Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank Flare 25 Vibrocore™ Drop HandlebarOffering strong and reliable performance, no matter what your riding discipline with the Vibrocore™ Drop Handlebar by Spank. This sturdy handlebar benefits from aggressively flared drops and a Zirconium-Doped 7-Series alloy construction for exceptional durability. Finished off with Vibrocore foam to protect you against vibrations from rocky terrain, this handlebar is made ready for the challenge. Features:Material: Zirconium-Doped 7-Series AlloyBar Clamp Diameter: 31.8mmDrop: 110mmReach: 65mmFlare: 25 degreesDimensions: 31.8mm x 42cm; 31.8mm x 44cm; 31.8mm x 46cmWeight: 345g (31.8mm x 42cm); 350g (31.8mm x 44cm); 355g (31.8mm x 46cm)Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank SPIKE 35 Vibrocore™ Riser HandlebarA perfect choice for your downhill assaults and freeride sessions, the SPIKE 35 Vibrocore™ is a riser bar that puts you in the ideal position for control and helps you to ride the trails harder than ever. This is because Spank has added its vibration dampening Vibrocore™ foam inside the bar, which drastically reduces the feedback you feel from the roughest sections of the trail. That’s not the only stand-out feature, as in addition to its advanced Zirconium Doped 7-Series Alloy construction, it has a shot-peened and anodised finish that enhances its strength, durability and corrosion resistance.Features:Material: Zirconium Doped 7-Series AlloyFinish: Shot-peened and anodised, decal logosUse: Downhill (DH) and freeride (FR)Stem Clamp Diameter: 35mmRise: 40mmLength: 820mmUpsweep: 5°Backsweep: 8°Lever Compatibility: All standard 22.2mm brake/gear lever clampsBig and burly 35mm bar clamp with increased strength and stiffness compared to conventional 35mm alloy barsInjected proprietary Vibrocore™ foam provides vibration damping to reduce arm pump and hand-numbnessShot-peening and anodising enhances fatigue life even furtherWeight optimised and adjustable to 760mmWeight: 300g (approx)Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Service Course SL-80 provides comfortable and efficient positions on the bar tops brake hoods or down in the drops. The bar allows a neutral wrist position on the drops and a flat brake-hood transition. This minimizes the need for up-rotated bars. Drops are angled outward by 4 degrees reducing wrist strain. Named after its 80mm reach to bring the hoods and control levers back where you want them. The ergonomic 125mm drop places the angled drop position where you can easily reach it while maintaining a neutral wrist angle. The SL-80’s rounded bar top is clip compatible. Forged from lightweight 7075 aluminum. FEATURES Distinctive Zipp cosmetics 7050 Aluminum 80mm reach/125mm drop designed to fit a large number of riders Clip on compatible Lifetime warranty SPECIFICATIONS MATERIAL (HB) Al-7050 CLAMP DIAM 31.8mm CLIP COMPATIBLE Yes WIDTH (CENTER-TO-CENTER) 36cm 38cm 40cm 42cm 44cm 46cm REACH (HB) 80mm DROP (HB) 125mm RAMP ANGLE 7° OUTSWEEP 4° FINISH (HB) Matte with stealth decals
Zipp Service Course SL 80 Ergo handlebar is all about making you faster in style and comfort. The bar offers an 80mm reach and 125mm drop perfect for a rider looking for a medium reach and shallow drop who likes reaching down to rather than into the drops. This bar has a flattened top and 3° backsweep for a neutral wrist position on the tops. The bars feature a 7° ramp angle for a flat transition to the hoods and a 4° outsweep at the drops. In addition to the ergonomic benefits the Service Course SL 80 Ergo is our first ergo bar to be clip-on compatible. Made of 7050 aluminum the Service Course SL 80 Ergo weighs 275g for a 42cm-wide bar. Light weight stiffness and comfort: the Zipp Service Course line provides the right fit for all rider types. FEATURES Distinctive Zipp cosmetics 7050 aluminum for light weight and durability 80mm reach and 125mm drop for a medium-high position Flattened top shape with 3° backsweep for comfort Clip-on Compatible (40 42 44cm sizes only) Di2® RS910 junction compatible Matte Black nano blast aluminum Lifetime warranty SPECIFICATIONS MATERIAL (HB) Al-7050 CLAMP DIAM 31.8mm CLIP COMPATIBLE No Yes WIDTH (CENTER-TO-CENTER) 38cm 40cm 42cm 44cm REACH (HB) 80mm DROP (HB) 125mm RAMP ANGLE 7° OUTSWEEP 4° FINISH (HB) Matte with stealth decals
The bar offers the same compact reach and drop dimensions as the Service Course SL-70 but adds a flattened top section for a natural ergonomic grip on the bar tops and a revised ramp angle for proper fit. The SL-70 Ergo’s specially tuned drop shape creates comfortable hand positions with short reach to control levers vital for race situations. The bar’s 128mm drop help puts the rider low and in control without compromising comfort. Whether it’s a rider with smaller hands or a bigger rider getting aero by pairing this bar with a long stem this bar helps put just about any cyclists into his or her optimal position. FEATURES Distinctive Zipp cosmetics 7050 aluminum for light weight and durability 70mm reach and 128mm drop for a short-low position Flattened top shape with 3° backsweep for comfort Clip-on Compatible (40 42 44cm sizes only) Matte Black nano blast aluminum Lifetime warranty SPECIFICATIONS MATERIAL (HB) Al-7050 CLAMP DIAM 31.8mm CLIP COMPATIBLE No Yes WIDTH (CENTER-TO-CENTER) 38cm 40cm 42cm 44cm REACH (HB) 70mm DROP (HB) 128mm RAMP ANGLE 10° OUTSWEEP 4° FINISH (HB) Matte with stealth decals
The Service Course SL-70 is the bike fitter’s go-to bar. The short reach to the hoods allows a proper fit without compromising stem length and steering control. With the revised ramp angle proper fit is now achievable on even the most challenging setups. The 70mm reach is the shortest of Zipp’s Service Course bars. Together with its 128mm drop the bar is deal for riders preferring a low body position. Whether it’s a rider with a shorter torso or a bigger rider getting aero by pairing this bar with a long stem this bar helps put just about any cyclists into his or her optimal position. The SL-70’s flattened top provides a better ergonomic fit for the hand and is clip-on compatible. FEATURES Distinctive Zipp cosmetics 7050 aluminum for light weight and durability 70mm reach and 128mm drop for a short-low position Flattened top shape with3° backsweep for comfort Clip-on Compatible Matte Black nano blast aluminum Lifetime warranty SPECIFICATIONS MATERIAL (HB) Al-7050 CLAMP DIAM 31.8mm CLIP COMPATIBLE Yes WIDTH (CENTER-TO-CENTER) 36cm 38cm 40cm 42cm 44cm REACH (HB) 70mm DROP (HB) 128mm RAMP ANGLE 10° OUTSWEEP 4° FINISH (HB) Matte with stealth decals
Ready for aggressive MTB rides, this riser bar delivers high performance from its hand crafted construction and rigorously tested design. It features a high modulus graphite carbon fibre construction, which combines both UD and 3K weave to give you a superior strength to weight ratio on the trails. Brand-X has also ensured that each riser bar is tested and certified to ISO 4210-2 standards, so you can be assured its more than capable of handling the most demanding of MTB rides. Available in 3 risers - 12mm, 25mm and 38mm and two widths- 780mm and 800mm, depending on your riding style and preference, all in 31.8mm clamp. Particle paint on the bar ends and clamp areas provide additional friction and prevent slip. Graphics are subtle and finishing is a matte black. Key Features: Material: Carbon,Finish: Matte,Backsweep: 9 degree,Upsweep: 6 degree,Use: Trail, All Mountain, Enduro, Downhill and Freeride,Weight: 780mm 31.8mm 25mm (240g); 800mm 31.8mm 25mm (242g),2 Year Manufacturer Warranty.