SRAM NX 11 Speed Grip Shift Rear Gear ShifterThe SRAM Nx1 11 Speed Shifter with X-Actuation technology gives you sharp, dependable shifting. Built for precise and swift shifting across SRAM's wide range 11-speed cassette, the NX Grip Shift brings industry changing technology to everyone.Features: SRAM 1x X-Actuation for precise and dependable 11-speed performance Speed Metal shift indexing Rolling Thunder ball bearing technology Jaws lock-on grip technology Most affordable fully featured 1x grip shifter in the industryTechnologies:Jaws: Once the Grip Shift shifter and grip interlock securely, forged aluminium clamps on either end reinforce the assembly by locking tightly to handlebar. Rolling Thunder: Three rows of ball bearings provide zero friction or play—reducing the force needed to shift and promoting long-term performance under all weather conditions with Grip Shift. Speed Metal: Full metal indexing keeps shifting crisp and precise with Grip Shift. X-Actuation: Developed specifically for SRAM 1x, X-Actuation keeps shifting sharp and consistent across the entire cassette. Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM EX1 X-Actuation MTB Trigger Gear ShifterSRAM's EX1 Trigger Shifter is specifically tuned for use with E-MTB bikes power assisted drivetrains, and as it's equipped with SRAM'S X-Actuation technology, shifts are precise, fast, and efficient. It's also specifically tuned to deliver one accurate shift at a time, so you avoid over shifting to the wrong gear, thus extending your E-MTB's battery life and decreasing component wear and tear.Features: Recommended Group: SRAM Red eTap Speed: 8-Speed Recommended group: SRAM EX1 Tuned for Single shifts only Technology Highlights: X-Actuation, MatchMaker XTechnologies:X-Actuation: Developed specifically for SRAM 1x, X-ACTUATION keeps shifting sharp and consistent across the entire cassette.MatchMaker X Integrated: The MatchMaker X clamp is more than just a clamp as it's the ideal way to put everything in easy reach. Since each clamp accepts up to three controls, you can put everything from your XLoc suspension lockout, your SRAM shifters and brake levers as well as your Reverb XLoc remote, all on to two clampsBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Oak racks come as standard with the fittings to hold two bikes but up to two more bikes can be added using extra kitsVinyl coated arms hold and protect your bike and can be independently adjusted to accommodate many shapes and sizes of frameThe front wheel of your bike can be stabilised with the Velcro straps providedAll assembly hardware is included
Oak racks come as standard with the fittings to hold two bikes, but up to two more bikes can be added using extra kitsVinyl coated arms hold and protect your bike, and can be independently adjusted to accommodate many shapes and sizes of frameThe front wheel of your bike can be stabilised with the Velcro straps givedAll assembly hardware is included
The ergonomic shifter style remote lever is designed to go where your front shifter would normally sit. This means that this kit is ideally suited for those using a 1x chain ring set up, without a front derailleur.Key Features:Material: AL7075-T651,Bar mounted shifter style remote lever,Cable operated,Cable Length: 1.5m,Finish: Sand blasted and hard anodised black.
This ergonomic paddle style remote lever is designed to sit next to your front shifter, allowing you to run your Ascend dropper seatpost when using a front derailleur and shifter.Key Features:Material: AL7075-T651,Bar mounted paddle style remote lever,Cable operated,Cable Length: 1.5m,Finish: Sand blasted and hard anodised black.
Under Armour's HeatGear Armour Compression Leggings are made with an ultra-lightweight, breathable and stretchy fabric that provides endless ease of movement and offers a comfortable, second-skin fit. A moisture management system also wicks sweat away from the body alongside anti-odour technology that will keep you dry and fresh all day long. Additionally, a wide exposed elastic waistband and updated gusset design further enhances support and fit while a drop-in Strength Pocket™ on the right side provides convenient storage. Care Instructions Machine wash cold with like colours. Use only non-chlorine bleach when needed. Tumble dry low. Do not iron. Do not use softeners. Do not dry clean.
The Wippermann 1E8 Hub Gears eBike Chain is developed specifically for the demands hub gear e-bike systems with wide sprockets. With its reinforced plates, the 1E8 is ideal for e-bikes with wide hub gears. The higher number of links enables easy adaptation to any chain length.Designed for high-torque loadsNickel reinforced inner linksCorrosion resistant for maximum service life 136 links628g
The 10 Speed Trigger Pro Shifter shifts up and down the cassette easily thanks to thumb-actuated levers that ensure a quick and easy shifting experience. This Pro Trigger shifter features light lever action and ultra-positive gear indexing for fast, precise and reliable gear shifting performance that's ideal for cross-country, enduro and adventure cycling. Fast, Precise and Reliable 1x10-Speed Trigger Shifter On the trail, the goal is to think about your shifting as little as possible. microSHIFT’s Trail Trigger Pro features millimetre-perfect ergonomics to put the shift levers exactly where you want them, giving you quick thumb access without compromising your grip over rough terrain. Light lever action is paired with super positive indexing to make sure you never miss a shift. There’s even an integrated silicone tracking pad on the lower lever to make sure thumb traction is fully optimized. Key Features: Compatible with microSHIFT Advent X rear derailleur Internal cartridge bearings allow for light lever throw and positive actuation under load Precise ergonomics put the shift lever where you want them Silicon traction pad provides superior traction in all conditions Not compatible with Shimano or SRAM
Ready for hitting your favourite mountain bike (MTB) trails, this shifter set features a robust aluminium build which makes it more than capable of handling all of the intensity that's associated with all-day epics on your ride. Xpress shifters use time-tested flat bar ergonomics with a separate index and thumb trigger, making the drivetrain easy to control without a steep learning curve. Robust internals with precise indexing deliver reliable shifting time after time. Marvo Series Marvo has one goal in mind: to make shifting so easy and reliable that you take it for granted. The shifters are silky smooth, the cassettes are continuously moulded from hardened steel, and the derailleurs feature a full metal construction. If you need a group that keeps working even if you forget about it, Marvo can make that happen. Technologies: - Sealed bearing mechanism for smoother, more positive action. Manufacturer's Part Number: SL-M859 Black Pair
The X.4 line-up sets the standard for recreational level shifting. An intelligent blend of performance and value for MTB or pavement. An ergonomic designs platform allows for simplistic control and a two-lever design has been introduced, modeled after SRAM's highest performance trigger shifters.
microSHIFT Advent X M9605 Trigger Pro Gear ShifterThe Advent X M9605 Trigger Pro Shifter from microSHIFT provides smooth, fast and precise gear shifting performance at the flick of the thumb. Gear shifts up and down the cassette is carried out with thumb-actuated levers that ensure a quick and easy shifting experience that's compatible with Advent X 10-Speed rear derailleurs. This Pro Trigger shifter features light lever action and ultra-positive gear indexing for fast, precise and reliable gear shifting performance that's ideal for cross country, enduro and adventure cycling.Fast, Precise and Reliable 1x10-Speed Trigger ShifterOn the trail, the goal is to think about your shifting as little as possible. microSHIFT's Trail Trigger Pro features millimetre-perfect ergonomics to put the shift levers exactly where you want them, giving you quick thumb access without compromising your grip over rough terrain. Light lever action is paired with super positive indexing to make sure you never miss a shift. There's even an integrated silicone tracking pad on the lower lever to make sure thumb traction is fully optimized.Key Features: Compatible with microSHIFT Advent X rear derailleur Internal cartridge bearings allow for light lever throw and positive actuation under load Precise ergonomics put the shift lever where you want them Silicon traction pad provides superior traction in all conditions Not compatible with Shimano or SRAMFeatures: Series: Advent X Model No.: SL-M9605-R Shifter Style: Trail Trigger Pro Speed: 10-Speed Sealed Bearings: Yes Silicone Pad: Yes Compatibility: microSHIFT Advent X Only Gear Indicator: No Operations: Thumb-Thumb Bracket Material: Aluminium Weight: 120gBuy microSHIFT Components from Chain Reaction Cycles, the World's Largest Online Bike Store.