This enduro fork comes equipped with a Float EVOL air spring and a GRIP2 damper with variable valve control for a wide range of adjustments. Fox Suspension has also kitted out this Factory Series model with a genuine Kashima coating, so you can enjoy its incredibly smooth front end suspension performance as well as its dazzling finish. Item Top Features Continued: Travel: Multiple options available Remote Operated: No Lever Operated Yes Lockout: No
This E-MTB suspension fork contains all the revolutionary features of the 36 model only packaged in a super-stout chassis that's specifically engineered for modern hard-hitting, long-travel enduro-style riding. Part of Fox Suspension's prestigious Factory Series, it comes race-ready with a genuine Kashima coating on its upper tubes for slippery smooth, ultra-durable performance. Designed to exceed the demands of Factory-level riders, this model is also equipped with a lightweight Float EVOL air spring and a GRIP2 damper with Variable Valve Control (VVC) for a high level of tuneability and control. Coming complete with many of the brand's finest technologies, plus Boost axle spacing for increased stiffness and strength, this is a perfect upgrade for enduro riders who want to go big. E-MTB Fork with GRIP2 Damper Fox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork. Float EVOL Air Spring EVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Elliptical Steerer: The 38’s elliptical steer tube is one of many ways we’ve further optimized stiffness-to-weight, placing more material only where it is needed, and eliminating every ounce of it where it’s not. - Optional mudguard with sturdy and seamless 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris (available separately). - 58mm crown diameter to match modern frame shape profiles. - 31% stiffer transverse shear, 9% stiffer fore/aft and 20% torsionally stiffer than 36. - Matching 8-click HSC and HSR adjustment on Grip2 forks and X2 shocks. Manufacturer's Part Numbers: 910-21-033 Black 27.5" QR110 170mm 44mm 910-21-032 Black 29" QR110 170mm 44mm
Coming feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders, this model boasts a genuine Kashima coating for fantastic durability, amazingly smooth performance and an eye-catching finish that complements any ride. DPS Damper, EVOL Air Spring and Adjustments Engineered for the rigours of modern trail riding, this MTB rear shock comes well-equipped with proven technologies to enhance your ride. Its dual piston system (DPS) damper features three positions of adjustment that can be controlled using a lever to choose between Open, Medium and Firm riding modes. Fox Suspension has also kitted out this version with a one-piece EVOL air spring that improves responsiveness and sensitivity, while its range of adjustment features allow you to easily fine-tune its suspension performance. Coming complete with an open mode adjust tuning range (1, 2, 3), rebound and air spring pressure adjustments, the Fox Suspension Float DPS Factory 3Pos-Adj LV Shock is a great choice of upgrade for fine-tuning your rear suspension to match your riding style as well as the terrain conditions. Technologies: - Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. - Updated graphics. - Dual Piston valve design improves both rebound and compression flow. - Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity.
Coming equipped with three-position compression adjustment, rebound and air pressure adjust, this cross-country fork forges a new path for modern day racing forks. Fox Suspension has also kitted out this Factory Series model with a genuine Kashima coating, which delivers exceptionally smooth operation as well as a stunning finish. Item Top Features Continued: Travel: 120mm Remote Operated: No Lever Operated: Yes Lockout: No Wheel Size Compatibility: Mutliple options available
This mountain bike rear shock features a Float DPS damper, which helps you perfect turns without cutting corners. Its DPS dual-piston system also combines exceptional bump compliance with smooth efficiency, so you can conserve your energy when you need it most. Coming complete with three positions of adjustment, this is a superb upgrade for a more rider-tuned feel. Technologies: DPS Damper: DPS damper with three positions - Open, Medium, Firm modes Dual Piston: Dual Piston valve design improves both rebound and compression flow EVOL LV Air Sleeve: Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity
Ready for everything from backroad adventures to XC racing, this versatile dropper seat post is engineered for performance. It's part of Fox Suspension's prestigious Factory Series that's World Cup proven and includes the best-of-the-best technology, so you can stay in full control wherever your next ride takes you. Coming equipped with a genuine Kashima upper coating, it provides buttery smooth, ultra-durable operation, while its anodised lower coating delivers extra protection against wear and corrosion. Another highlight is its coil spring, internal cable routing and travel configuration options that are specifically developed for the rigours of gravel riding and cross country. Keeping its weight as low as possible, this Factory Series version also comes complete with titanium hardware for a further 10g of weight savings. Super Lightweight Dropper Seat Post Meet the Transfer SL. At 128 grams (25%) lighter than the regular Transfer post, Fox Suspension has classed it as the lightest mainstream dropper post on the market. Period. With lever options for flat bars, drop bars, and 1x and 2x drivetrains it finally brings the word “shred” into the super-lightweight XC and Gravel conversation. Technologies: Factory Series: “Factory” says it all. The best-of-the-best technology Fox Suspension have to offer is available in Factory Series models with a buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven. - Windows in lower post allow cable clamp/slack to be pulled from post side for compatibility with GRX-style dropper levers and minimises extra cable housing length. - Longer travel configurations offer exposed length of 290mm for taller riders. - Shorter travel configurations offer shorter total length for smaller riders. - Coil spring for consistent return performance. - 70-85 degree seat angles are supported. - 7mm and 7x9mm saddle rails supported. - Compatible with 1x lever, which is Matchmaker, Shimano GRX, and I-SPEC EV compatible. (Sold separately). - Factory post includes Ti hardware for additional 10g weight savings. - Internal routing only. - Lightweight design. Manufacturer's Part Numbers: 925-01-201 Black 350mm 27.2 x 50mm 925-01-200 Black 370mm 27.2 x 70mm 925-01-206 Black 355mm 30.9 x 75mm 925-01-204 Black 380mm 30.9 x 100mm 925-01-207 Black 355mm 31.6 x 75mm 925-01-205 Black 380mm 31.6 x 100mm
Classed as an ultra-lightweight cross country (XC) weapon, this mountain bike (MTB) suspension fork features Fox Suspension's prestigious Step Cast chassis. Its Step Cast design offers a pioneering lower leg shape that isn’t just for looks, its narrow stance and stepped design saves weight, decreases frontal area, and provides clearance for the spokes and brake rotor. Ready for the most demanding of XC racing situations, this version is also kitted out with a lightweight Float EVOL air spring and a FIT4 damper with quick on-the-fly three-position adjustment. As a result, you can easily fine-tune your front-end suspension to match your riding style as well as the terrain conditions. Part of the brand's renowned Factory Series, this model comes complete with a genuine Kashima finish on its upper tubes for slippery smooth, ultra-durable performance as you race for the podium. FIT4 3-Position Damper In its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences. Lightweight Float EVOL Air Spring This model's Float EVOL air spring automatically equalises the positive and negative air chambers for increased sensitivity and traction, regardless of the air pressure setting. Riders can fine-tune the characteristics of the positive air spring by using volume spacers. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks. Lightweight FIT4 Closed Cartridge System: Lightweight version of Fox Suspension's patented FIT4 closed cartridge system. The weight-optimised design uses a detailed aluminium piston, intricate material removal and consolidated parts design to make it lighter. Narrow Chassis: The chassis is 10mm narrower than the typical 32 design. Shorter Upper Tube Length: The shorter upper tube length raises the floor of the magnesium lower leg, creating a hollow lower section and a lighter overall system. Manufacturer's Part Numbers: 910-20-230 Black 27.5 KB100 100mm 44mm 910-20-222 Black 29 KB110 100mm 44mm 910-20-221 Black 29 KB100 100mm 51mm 910-20-220 Black 29 KB110 100mm 51mm 910-20-219 Orange 29 KB110 100mm 44mm 910-20-218 Orange 29 KB110 100mm 51mm 910-20-223 Black 29 KB100 100mm 44mm
No stranger to winning awards, accolades and Enduro World Series (EWS) races, this electric mountain bike (E-MTB) suspension fork is engineered for powerful front-end suspension performance. Part of Fox Suspension's prestigious Factory Series, it comes trail-ready with features and technologies that are designed to exceed the demands of Factory-level riders. With an eye-catching genuine Kashima coating on its upper tubes, it provides slippery smooth operation while remaining ultra-durable as you tackle challenging terrain conditions. Benefitting from a lightweight Float EVOL air spring and a highly adjustable GRIP2 damper, the 36 offers an excellent combination of performance and tunability, everywhere from backcountry routes to the EWS circuit. E-MTB Fork with GRIP2 Damper Fox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork. Float EVOL Air Spring EVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by the Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever-operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Manufacturer's Part Numbers: 910-20-209 Black 27.5" QR110 140mm 44mm 910-20-208 Black 27.5" QR110 160mm 44mm 910-20-204 Black 29" QR110 160mm 51mm 910-20-203 Black 29" QR110 160mm 44mm
Featuring a completely updated design both inside and out, this race-ready enduro suspension fork is engineered for smooth and dependable performance. No stranger to winning awards, accolades and Enduro World Series (EWS) races, this model is prepared for everything from big backcountry routes to the EWS circuit. Fox Suspension has equipped it with Boost axle spacing, making it ideal for modern enduro thanks to its extra stiffness. It also offers a wide range of adjustability from its lightweight Float EVOL air spring and its FIT4 damper that enable you to easily set it up to match your riding style. Part of the brand's renowned Factory Series, it includes the best-of-the-best technologies and it comes complete with a genuine Kashima coating on its upper tubes for slippery smooth, ultra-durable performance. Enduro Fork with Float EVOL Air Spring EVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. FIT4 Damper In its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. - Increased crown diameter to match modern frame shape profiles. - Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (available separately). Manufacturer's Part Numbers: 910-20-243 Black 27.5" QR110 160mm 44mm 910-20-238 Black 29" QR110 150mm 51mm 910-20-237 Black 29" QR110 150mm 44mm
Feature-packed to exceed the demands of Factory-level riders, this mountain bike (MTB) suspension fork is part of the renowned Factory Series and includes a genuine Kashima finish on its upper tubes for slippery smooth, ultra-durable performance. Fox Suspension has also kitted out this version with a lightweight Float EVOL air spring and a GRIP2 damper to deliver a wide range of adjustment features, so you can fine-tune your suspension to match your riding style. Whether you're shredding your favourite local trails with your riding buddies or exploring new mountain routes on your own adventures, this do-it-all trail fork is in a class of its own. Hard Charging Trail Fork with GRIP2 Damper Fox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork. Float EVOL Air Spring Returning with the same legendary suppleness and longevity, the EVOL air spring in 34’s now has an enlarged negative air spring to assist with mid-stroke support. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design is designed to pair perfectly with modern trail bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Updated Crown: Updated 58mm diameter crown. Manufacturer's Part Numbers: 910-21-009 Black 29" QR110 130mm 51mm 910-21-008 Black 29" QR110 130mm 44mm 910-21-004 Black 29" QR110 140mm 51mm 910-21-003 Orange 29" QR110 140mm 44mm 910-21-001 Black 29" QR110 140mm 44mm
Coming packed with many of Fox Suspension's proven technologies, this trail-ready mountain bike (MTB) rear shock is part of the renowned Factory Series and is equipped with a genuine Kashima coating for increased durability, smooth performance and an eye-catching finish. Boasting an updated chassis, damper and compression ratios, it's specially developed to exceed the demands of Factory-level riders. Air Spring Rear Shock with Variable Valve Control (VVC) Benefitting from the lightweight of its air spring and an unmatched level of tunability, this rear shock is ready for the rigours of modern trail riding. It's kitted out with high and low-speed compression as well as high and low-speed rebound adjustments, so you can fine-tune its suspension performance to match your riding style as well as the terrain conditions. Delivering a more rider-tuned feel, this version is also equipped with Fox Suspension's patented Variable Valve Control (VVC) technology on the high-speed rebound circuit for unrivalled external fine-tuning. The X2 changes everything, including the game. This award-winning, gravity-defying air shock holds nothing back, especially not you. With a laundry list of advanced features, the Fox Suspension Float x2 Factory Shock is ready to clean house. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated Damper: The Float X2's 4-way adjustable, twin-tube architecture now features patented Variable Valve Control (VVC) technology on the high-speed rebound circuit for unrivalled external fine-tuning. Updated compression ratios and a MCU bumper deliver improved progressivity and bottom out control with fewer volume spacers. Updated Chassis: Float X2's entirely revised chassis features an ultra-low friction hard chrome damper shaft, updated low-friction bushings and seals, and genuine Kashima coated outer body for smoother performance than ever before. High-flow main piston. Improved bearing ratio for metric sizes. Increased control and decreased harshness via linear damping. Reduced length reservoir for better fit on more frames. Finned inner body for improved structural rigidity and reduced hysteresis. Matching 8-click HSC and HSR adjustment on GRIP2 forks and X2 shocks. Updated compression ratios, 300psi max. Manufacturer's Part Numbers: 979-01-080 Black 9.5x3.0" 979-01-078 Black 10.5x3.5"
Prepared for wherever your next trail-riding adventure takes you, this mountain bike (MTB) suspension fork is feature-packed and designed to exceed the demands of Factory-level riders. Part of Fox Suspension's distinguished Factory Series, this model boasts a genuine Kashima coating on its upper tubes for amazingly smooth, ultra-durable performance. Another highlight is it also benefits from a lightweight Float EVOL air spring as well as a FIT4 damper with quick on-the-fly three-position adjust. Its wide range of adjustments means that you can easily fine-tune your front-end suspension to match your riding style as well as the terrain conditions. With three compression damping positions (Open, Medium and Firm), additional low-speed compression (Open mode adjust) and low-speed rebound, this trail fork is more tuneable and capable than ever before. Trail Fork with Float EVOL Air Spring Returning with the same legendary suppleness and longevity, the EVOL air spring in 34’s now has an enlarged negative air spring to assist with mid-stroke support. FIT4 Damper In its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design is designed to pair perfectly with modern trail bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Manufacturer's Part Numbers: 910-21-010 Black 29" QR110 130mm 51mm 910-21-007 Black 29" QR110 130mm 44mm 910-21-005 Black 29" QR110 140mm 51mm 910-21-002 Black 29" QR110 140mm 44mm