Search found 428 items

Fox Suspension DHX2 Factory 2 Position Adjust Shock - 230mm Length x 65mm Stroke
  • £749.00

Fox Suspension DHX2 Factory 2 Position Adjust ShockReady for all-day epics on your favourite local trails, this mountain bike (MTB) rear shock features a coil spring ready design, an updated chassis and damper plus a high-flow main piston for precise and controlled handling on the most demanding of terrains. Part of Fox Suspension's prestigious Factory Series, this model is kitted out with proven technologies and is designed to exceed the demands of Factory-level riders.Adjustable Coil Spring Rear ShockBenefitting from Fox Suspension's finest technologies for modern mountain bike riding, this rear shock is equipped with a coil spring ready design and an updated damper. The updated X2 damper maintains a twin tube architecture, employing a proven dual-shim stack main piston for improved damping and more precise tuning than ever before. Fox Suspension also added its patented Variable Valve Control (VVC) technology to the high-speed rebound (HSR) circuit, which allows for easy, external fine-tuning of your suspension performance. Just like GRIP2 forks, the X2 family of shocks also feature identical 8 clicks of adjustment on high-speed compression (HSC) and high-speed rebound (HSR). This allows you to make consistent adjustments between their front and rear suspension. Nothing sticks to the ground quite like a coil shock. With an entirely updated chassis and damper, enhanced tunability, smoother action, and a MCU bumper for progressivity and end-stroke control - the Fox Suspension DHX2 Factory 2Pos-Adj Shock is ready to race straight out of the gate.Please note: A coil spring is not included with this model but is available to purchase separately.Features: Shaft Coating: Chromoly (CrMo) Steel Use: MTB Spring Type: Coil spring Adjustment Lever: 2-position Open/Firm lever (retains high and low speed compression adjustment) Adjustment Features: High and low speed compression, high and low speed rebound Variable Valve Control (VVC) Rebound: Yes Detents on Spring Collar: Yes Spring Included: No, available separatelyTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders. What we sell is what they race. Updated Chassis: The outer body on the DHX2 features steel construction with finned inner tubes for reduced hysteresis. DHX2 features an updated low-friction hard chrome coating on the shaft with new seals designed to pair perfectly to the new shaft coating, reducing frictions and increasing seal life. Updated Damper: The updated X2 damper maintains a twin tube architecture, emplying a proven dual-shim stack main piston for improved damping and more precise tuning than ever before. Fox Suspension added its patented VVC technology to the HSR circuit. VVC is a proprietary variable valve technology that allows for easy, external fine-tuning of suspension performance. Just like GRIP2 forks, the X2 family of shocks also feature identical 8 clicks of adjustment on HSC and HSR. This allows the rider to make consistent adjustments between front and rear suspension. MCU Bumper: The updated MCU bumper is designed to allow for supple beginning and mid-stroke, seamlessly transitioning to a bottomless end-stroke. Independent Firm Mode Circuit: This version's 2-position switch operates on an independent circuit, resulting in a firmer lockout. Revised Spring Changes: The coil-sprung DHX2 now uses a full spring collar, held in place with a C-clip, and a new preload collar with indexed notches to allow for light preload without the collar backing off.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

VIEW ITEM
Fox Suspension Float X Factory 2Pos-Adj Shock - 185mm Length x 55mm Stroke
  • £549.99
  • RRP £659.00
  • Saving you £17

Fox Suspension Float X Factory 2Pos-Adj ShockThis mountain bike (MTB) rear shock is part of the prestigious Factory Series and is developed for maximum rear-end suspension performance on the most demanding of trail conditions. It features a wide range of adjustment features including an independent two-position Open/Firm lever, which allows you to easily dial-in your ideal settings to match your riding style as well as the terrain. Fox Suspension has also kitted out this model with 16 clicks of Low Speed Rebound and 11 clicks of Low Speed Compression, so you can benefit from a more rider-tuned feel with high-performance damping wherever your ride takes you. Coming complete with a genuine Kashima coating, this high-quality Factory Series version delivers enhanced lubrication and a harder wearing surface, which results in increased shock smoothness and sensitivity on the trails.Heavyweight Features in a Lightweight PackageDesigned specifically to meet the demands of aggressive trail riders, the Float X combines sophisticated damping and fade-free performance with incredible light weight and outstanding structural integrity.Features: Body Finish: Kashima Coat Air Sleeve Finish: Kashima Coat Use: MTB Adjustments: Independent 2 Position Open/Firm Lever, Low Speed Rebound: 16 Clicks, Low Speed Compression: 11 ClicksTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Updated chassis and damper. High-flow main piston. Air seal package. Volume spacers with smaller increments. MCU bottom out bumper. Numbered tool-free 12 position single-turn LSC (Low Speed Compression) adjuster. Independent firm mode circuit - Clockable 2 position adjuster. Increased rebound adjuster range (over DPX2). Optimized reservoir lengths per shock size. Hydraulic top out feature. Reduced damper noise. Larger air sleeve bore reduces average rider pressure by 40 psi vs. DPX2. Bearing hardware compatible both sides. Air valve location offers improved frame fitment and pump access.Manufacturer's Part Numbers: 979-01-053 230x65mm Metric 979-01-054 185x52.5mm Trunnion 979-01-056 185x55mm Trunnion 979-01-058 205x60mm Trunnion 979-01-059 205x62.5mm Trunnion 979-01-041 190x45mm Metric 979-01-043 210x50mm Metric 979-01-045 210x52.5mm Metric 979-01-047 210x55mm Metric 979-01-049 230x57.5mm Metric 979-01-051 230x60mm MetricBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

VIEW ITEM
Fox Suspension Float DPS Factory 3-Position Adj Shock - 50mm Stroke
  • £489.99
  • RRP £529.00
  • Saving you £7

Fox Suspension Float DPS Factory 3-Position Adj ShockAll set for hitting your favourite local trails, this Factory Series mountain bike (MTB) rear shock combines a DPS damper, an EVOL air spring and a three-position lever for easy adjustability. Coming feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders, this model boasts a genuine Kashima coating for fantastic durability, amazingly smooth performance and an eye-catching finish that complements any ride.DPS Damper, EVOL Air Spring and AdjustmentsEngineered for the rigours of modern trail riding, this MTB rear shock comes well-equipped with proven technologies to enhance your ride. Its dual piston system (DPS) damper features three positions of adjustment that can be controlled using a lever to choose between Open, Medium and Firm riding modes. Fox Suspension has also kitted out this version with a one-piece EVOL air spring that improves responsiveness and sensitivity, while its range of adjustment features allow you to easily fine-tune its suspension performance. Coming complete with an open mode adjust tuning range (1, 2, 3), rebound and air spring pressure adjustments, the Fox Suspension Float DPS Factory 3Pos-Adj Shock is a great choice of upgrade for fine-tuning your rear suspension to match your riding style as well as the terrain conditions.Features: Body Finish: Genuine Kashima coating Air Sleeve Finish: Genuine Kashima coating Use: MTB Spring Type: EVOL Air spring Damper: DPS Adjustments: Three-position lever actuated Open, Medium and Firm modes, Open mode adjust tuning range (1, 2, 3), rebound and air spring pressure Lever Actuated: Yes Remote Actuated: NoTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated graphics. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

VIEW ITEM
Fox Suspension 36 Float Factory Grip 2 Fork - Orange - Axle: 15QR110 Steerer: Tapered, Orange
  • £899.99
  • RRP £1239.00
  • Saving you £27

Fox Suspension 36 Float Factory Grip 2 ForkThis mountain bike (MTB) suspension fork is engineered for the demands of modern trail riding. It's part of Fox Suspension's renowned Factory Series, which means that it comes feature-packed and is designed to exceed the demands of Factory-level riders. Another highlight is its genuine Kashima coating on its upper tubes that provides slippery smooth and ultra-durable performance as you carve your way around the mountain. Boasting a wide range of adjustments from its Float EVOL air spring and GRIP2 damper with dual Variable Valve Control (VVC), this model makes it simple to dial in your ideal settings for smooth shock absorption and control on your ride.MTB Fork with Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL's linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.GRIP2 DamperFox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork.Features: Upper Tube Finish: Genuine Kashima Coat Use: MTB Axle: 15QRx110mm Air Spring: Float EVOL Damper: GRIP2 with dual Variable Valve Control (VVC) Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks Steerer Diameter: 1.5" tapered Compatible Rotor Size: 180mm direct Post Mount, Up to 230mm compatible Starting Weight: 1965gTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork's wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork's travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don't want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material.Manufacturer's Part Numbers@ 910-20-235 Black 29" QR110 160mm 51mm 910-20-234 Orange 29" QR110 160mm 44mm 910-20-233 Black 29" QR110 160mm 44mm 910-20-242 Black 27.5" QR110 160mm 44mm 910-20-241 Black 27.5" QR110 160mm 37mm 910-20-240 Orange 27.5" QR110 160mm 44mm 910-20-236 Black 29" QR110 150mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

VIEW ITEM
Fox Suspension 34 Float Factory Fit4 MTB Fork - Black - 140mm Travel, Black
  • £899.99
  • RRP £1019.00
  • Saving you £12

Fox Suspension 34 Float Factory Fit4 ForkReady for fast-paced and intense MTB adventures, this off-road suspension fork delivers smooth and reliable front end shock absorption on the most challenging of rides. It features a robust aluminium and magnesium construction, which is more than capable of handling all the abuse that's associated with all-day epics in the mountains. Coming equipped with a Float EVOL air spring and a FIT4 damper, this model offers riders a wide range of compression, rebound and air pressure adjustments for the ultimate experience.Features:Steerer Tube Material: AluminiumCrown Material: AluminiumStanchion Tube Material: AluminiumLower Tube Material: MagnesiumUpper Leg Finish: Genuine Kashima coat Use: MTB Air Spring: Float EVOL Damper: FIT4 with three-position lever Adjustment: 3-position compression adjust (Open 22 click low-speed compression, Medium and Firm modes), rebound and air pressure adjust Steerer: 1 1/8-1.5" tapered Axle: Multiple options available Brake Mount: Disc PM 6" (160mm direct mount)Stanchion Tube Diameter: 34mm Offset: Multiple options available Travel: Multiple options available Remote Operated: No Lever Operated Yes Lockout: NoBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

VIEW ITEM
Fox Suspension 36 Float Factory Grip2 Boost Fork 2023 - Matte Black - Blue - 140mmTravel, Matte Black - Blue
  • £748.99
  • RRP £1239.00
  • Saving you £40

Fox Suspension 36 Float Factory Grip2 Boost Fork (2023)Boasting the best features and technologies that Fox has to offer, the race-proven 36 Float Factory Grip2 Boost Fork will enable you to dominate the toughest trails on your all mountain bike (MTB).Prepared for everything from backcountry adventures to day-long epics on your favourite mountain bike (MTB) trails, this suspension fork is engineered for the demands of modern all mountain riding. It's part of Fox Suspension's renowned Factory Series, which means that it comes feature-packed and is designed to exceed the demands of Factory-level riders. Boasting a wide range of adjustments from its Float EVOL air spring and GRIP2 damper with dual Variable Valve Control (VVC), this model makes it simple to dial in your ideal settings for smooth shock absorption and control on your ride.Fox Suspension Factory Series"Factory" says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. This version of the FOX 36 also receives an update in the form of an updated crown with an revised design and engineering for more steerer tube overlap improving durability and maintaining stiffness while dropping 20 grams.MTB Fork with Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.GRIP2 DamperFox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork.Features: Steerer Tube Material: Aluminium Crown Material: Aluminium Stanchion Tube Material: Aluminium Lower Tube Material: Magnesium Upper Leg Finish: Genuine Kashima Coat Use: All Mountain, Enduro Air Spring: Float EVOL Damper: GRIP2 with dual VVC (Variable Valve Control) Adjustment: High and low-speed compression, high and low-speed rebound, air pressure adjusts Steerer: 1 1/8-1.5" tapered Axle Type: 15 x 110mm Boost Brake Mount: Disc PM 7" (180mm direct mount) Stanchion Tube Diameter: 36mmOffset: 44mm Remote Operated: No Lever Operated: Yes Lockout: No Wheel Size: Multiple options available Floating Axle Included: Yes Mudguard mounts: Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment (sold separately)Technologies:Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicksFloating Axle:  Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The updated 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your rideLower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travelBleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsivenessLower Leg Arch:  The arch design of the updated 36, 38, and 40 models are designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's updated arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

VIEW ITEM
Fox Suspension 36 Float Factory Grip2 Boost Fork 2022 - Matte Black - Red - 160mm Travel, Matte Black - Red
  • £748.99
  • RRP £1239.00
  • Saving you £40

Fox Suspension 36 Float Factory Grip2 Boost Fork (2022)Designed for all-mountain and enduro racing, this Fork from Fox Suspension combines quality with lightweight stiffness for unrivalled durability. It features a GRIP damper with dual variable valve control and a Float EVOL air spring so you can adjust pressure and speed compression with ease. This fork also benefits from a Kashima coating for enhanced durability and long-lasting performance when tackling tough trails.   Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat.Features: Steerer Tube Material: Aluminium Crown Material: Aluminium Stanchion Tube Material: Aluminium Lower Tube Material: Magnesium Upper Leg Finish: Genuine Kashima Coat Use: All Mountain, Enduro Air Spring: Float EVOL Damper: GRIP2 with dual VVC (Variable Valve Control) Adjustment: High and low-speed compression, high and low-speed rebound, air pressure adjusts Steerer: 1 1/8-1.5" tapered Axle Type: 15 x 110mm Boost Brake Mount: Disc PM 7" (180mm direct mount) Stanchion Tube Diameter: 36mmOffset: 44mm Remote Operated: No Lever Operated: Yes Lockout: No Wheel Size: Multiple options available Floating Axle Included: Yes Mudguard mounts: Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment (sold separately)Technologies:Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicksFloating Axle:  Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The updated 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your rideLower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travelBleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsivenessLower Leg Arch:  The arch design of the updated 36, 38, and 40 models are designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's updated arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

VIEW ITEM
Fox Suspension 34 Float SC Factory Remote Boost Fork 2022 - Matte Black - Blue - 120mm Travel, Matte Black - Blue
  • £659.99
  • RRP £1199.00
  • Saving you £45

Fox Suspension 34 Float SC Factory Remote ForkIf you're serious about gaining a competitive advantage on the toughest cross country (XC) racing trails, the 34 Float SC Factory model is the ideal mountain bike (MTB) fork choice. Its Kashima coated stanchions ensure super-smooth travel to help you maintain your speed over tree roots, rock gardens and anything else the trail throws at you.Part of Fox Suspension's renowned Factory Series, this suspension fork is specifically tailored for the cross country (XC) racing with a build that's feature-packed and to exceed the demands of Factory-level riders. It's equipped with an updated chassis that's 15% stiffer than the 32 standard model as well as a revised arch shape that offers improved head tube clearance with shorter rakes. Developed from the ground up to deliver uncompromised XC racing performance, it's also kitted out with a Float EVOL air spring and a FIT4 3-Position damper for a high level of tuneability and control. Coming complete with a genuine Kashima upper tube coating that's slippery smooth and ultra-durable, this is a great choice of upgrade for dependable front-end suspension performance on the most demanding of racing conditions.XC Fork with Float EVOL Air SpringReturning with the same legendary suppleness and longevity, the EVOL air spring in 34’s now has an enlarged negative air spring to assist with mid-stroke support. The 34 SC also comes with the option to tune the negative air spring with a volume spacer.FIT4 3-Position DamperIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Features: Upper Tube Finish: Genuine Kashima Use: Cross Country (XC) Axle: Kabolt 110mm Boost Air Spring: Float EVOL air spring Damper: FIT4 3-Position Remote Push to Lock (PTL) Steerer Diameter: 1.5" tapered Wheel Size: 29" Max Tyre Size: 29x2.40" Rotor Size: 160mm direct Post Mount, Up to 180mm compatible Remote Compatible: Yes (sold separately) Offset: 44mm Weight: 1496g (starting weight)Technologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks, Low-speed rebound 10 clicks Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design is designed to pair perfectly with modern trail bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of materialBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

VIEW ITEM
Fox Suspension 34 Float SC Factory Remote Boost Fork 2022 - Matte Black - Deep Lake Blue - 120mm Travel, Matte Black - Deep Lake Blue
  • £659.99
  • RRP £1199.00
  • Saving you £45

Fox Suspension 34 Float SC Factory Remote ForkIf you're serious about gaining a competitive advantage on the toughest cross country (XC) racing trails, the 34 Float SC Factory model is the ideal mountain bike (MTB) fork choice. Its Kashima coated stanchions ensure super-smooth travel to help you maintain your speed over tree roots, rock gardens and anything else the trail throws at you.Part of Fox Suspension's renowned Factory Series, this suspension fork is specifically tailored for the cross country (XC) racing with a build that's feature-packed and to exceed the demands of Factory-level riders. It's equipped with an updated chassis that's 15% stiffer than the 32 standard model as well as a revised arch shape that offers improved head tube clearance with shorter rakes. Developed from the ground up to deliver uncompromised XC racing performance, it's also kitted out with a Float EVOL air spring and a FIT4 3-Position damper for a high level of tuneability and control. Coming complete with a genuine Kashima upper tube coating that's slippery smooth and ultra-durable, this is a great choice of upgrade for dependable front-end suspension performance on the most demanding of racing conditions.XC Fork with Float EVOL Air SpringReturning with the same legendary suppleness and longevity, the EVOL air spring in 34’s now has an enlarged negative air spring to assist with mid-stroke support. The 34 SC also comes with the option to tune the negative air spring with a volume spacer.FIT4 3-Position DamperIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Features: Upper Tube Finish: Genuine Kashima Use: Cross Country (XC) Axle: Kabolt 110mm Boost Air Spring: Float EVOL air spring Damper: FIT4 3-Position Remote Push to Lock (PTL) Steerer Diameter: 1.5" tapered Wheel Size: 29" Max Tyre Size: 29x2.40" Rotor Size: 160mm direct Post Mount, Up to 180mm compatible Remote Compatible: Yes (sold separately) Offset: 44mm Weight: 1496g (starting weight)Technologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks, Low-speed rebound 10 clicks Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design is designed to pair perfectly with modern trail bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of materialBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.

VIEW ITEM
Nukeproof Reactor 275 Factory Carbon Bike (XT) Full Suspension Mountain Bikes
  • £3974.99
  • RRP £5299.99
  • Saving you £25

From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. Frame Construction: To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time.  Each frame is simply tailored around each wheel size. Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry: All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design: To ensure the bike could climb as well as it descends, Nukeproof designed the 4-bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. Full Specification List: • Frame: Nukeproof Reactor 275 Carbon, 140mm rear travel, UD woven Carbon Fibre frame, internal cable routing, ISCG 05 mounts, Enduro bearings, Threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection • Fork: Fox 36 Float, Factory Series, Kashima, Grip 2 Damper, 160mm, 44mm Offset, BOOST, Kabolt-X, Orange • Shock: Fox Float X, Factory Series, Kashima, 2 Position, EVOL LV, Custom CM+, RM, Rezi LM tune, 210x55mm, Bearing End, 1x 0.3 spacer fitted • Front Wheel: DT Swiss XM1700 SPLINE 30,27.5", 6 Bolt, 110x15mm • Rear Wheel: DT Swiss XM1700 SPLINE 30, 27.5", 6 Bolt, Shimano Microspline Driver, 148x12mm • Tyres: Front: Maxxis Assegai 27.5”x2.5 WT 3C MaxxTerra/EXO+/TR, Rear: Maxxis Dissector 27.5”x2.4 WT 3C MaxxTerra/EXO+/TR • Crankset: Shimano XT M8100 12-Speed, Hollowtech 2, 170mm, 32T, 52mm Chainline • Shifter: Shimano XT M8100-R, 12-speed Rapidfire Plus, I-Spec EV • Rear Derailleur: Shimano XT M8100, SGS 12-Speed, Shadow Plus • Chain: Shimano XT M8100 HG 12-speed Inc Quicklink • Cassette: Shimano XT M8100-12, 12-Speed (HYPERGLIDE+), 10-51T • Brakes: Shimano XT M8120, 4 Pot Brake, Metallic Pads • Front Rotor: Brakco, 203mm • Rear Rotor: Brakco, 180mm • Handlebars: Nukeproof Horizon V2 25mm Rise, Width - S780mm, M780mm, L800mm, XL800mm • Stem: Nukeproof Horizon, 45mm, Black • Saddle: Nukeproof, Black • Seatpost: Bikeyoke Divine Stealth with Brand-X Remote lever, S:125mm drop; M:160mm drop; L/XL:185mm drop • Headset: Nukeproof, 44-56 IITS • Grips: Nukeproof Sam Hill Signature • Weight: 14kg (Medium, Tubeless) Please Note: Due to severe delays in the bicycle supply chain, Nukeproof has been forced to make some alterations to the specification of the component parts supplied with this bicycle. As a result, the specification may differ from those shown in the images. Please refer to the specification table above for accurate information. Key Specifications: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 160mm Axle to Crown: 549mm Fork Offset: 46mm Rear Travel: 140mm Wheels Size: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x55mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing: S/M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: Sram Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab.

VIEW ITEM
Nukeproof Giga 297 Factory Carbon Bike (XT) Full Suspension Mountain Bikes
  • £5499.99

The Giga 297 Factory XT features a full carbon frameset with Nukeproof's reactive and adjustable suspension platform and it is equipped with exceptional components to match. It is also engineered with a mixed wheel platform, with a 29" wheel up front and a 27.5" on the rear, giving a sublime balance of speed and stability that enhances your pace, confidence and control. Fox Factory Kashima Suspension and Shimano XT 12-Speed Groupset This Giga Factory edition is armed with Fox 38 Float Factory Kashima coated forks, a Float X2 Factory Kashima rear shock and a Shimano XT M8100 12-Speed groupset. This groupset includes a wide-ranging 10-51T cassette, XT M8120 4-Pot hydraulic disc brakes and a Shimano XT Hollowtech II chainset. Plus, this full-suspension bike rolls fast and stable upon DT Swiss EX1700 Spline 30 wheels wrapped in Maxxis Assegai and Minion DHR Tubeless Ready tyres, giving you more pace and grip than you thought possible. Gluttony – Habitual Greed or Excess It’s a motto that athletes like Sam Hill live by. The new Nukeproof Giga is the embodiment of this idea; Designed to be the ultimate hard-hitting Super-Enduro weapon for when you just need more. As riders, we are all guilty of the gluttonous sin; we never stop striving, never stop pushing, enough is never enough in the hunt for the ultimate. It’s a constant push for bigger, longer, rougher and faster with ever-increasing demands on the performance and capabilities of our bike. The pursuit is endless. In its first year, the Giga frames have racked up numerous test wins and media awards, plus a whole heap of silverware at the races. Whatever the wheel size; the Giga is a seriously capable machine, with 180mm (27.5” or 29”/27.5”) or 170mm (29”) rear travel; the Giga is a monster truck of a bike that has travel in reserve for when you need it. But to pigeon-hole it as a point-and-shoot machine would be a disservice as it is so much more capable than this might suggest. Due to the way that it uses its travel; the Giga gives you the feel of a big bike, yet the versatility of a modern super-enduro bike. The Giga has a dynamic and confidence-inspiring ride to help you push your limits in all kinds of terrain. It’s equally at home at big mountain technical enduro stages of venues like La Thuile, as it is lapping the biggest lines in the Whistler bike park. Supportive, Controlled and Progressive Suspension Performance The suspension is designed to be super supple off the top, whilst being supportive in the mid-stroke and progressive throughout the rest of the travel. The anti-squat is optimised to ensure the Giga descends like a hooligan yet behaves itself on the climb back to the top for the next run. The suspension platform is based on the same horseshoe driven linkage as Nukeproof’s award-winning Dissent downhill frame, albeit now with a 2-stage main pivot flip-chip. Using an eccentric axle system, riders can alter the Kinematic progressivity, so the bike can be tailored to suit the conditions on the trail with only an 8mm Allen key. Setting 1 = 25.5% progression Setting 2 = 29% progression Both settings have a super supple beginning for small bump compliance. They also both have good mid-stroke support for better cornering and pumping. Like the Dissent, the progression drops off in the end stroke to prevent mid-stroke harshness or spiking and allows more tuning options with volume spacers. The + Progressive setting can be used to add shock progression on a coil set up just like adding a volume spacer to an air shock. The added suppleness is also good in wet and slippery conditions. Robust and Lightweight Carbon Fibre Frameset The Giga Frame is constructed completely from UD 700/800 Carbon fibre. This allowed Nukeproof to optimise the stiffness and compliance of the frame parts individually. The front triangle has been tailored for stability and precision, whilst the rear triangle was designed for compliance to help tracking and provide grip. Another bonus of the carbon rear triangle is that it has a lower un-sprung mass for ultimate suspension performance. To ensure a perfectly dialled fit Nukeproof now offer the 297 bikes in S, M, or L sizes and the 290 bikes in M, L, XL or XXL. The frame geometry is Long, Low, Slack and Steep as it is based around their saddle offset principle, which ensures the seated riding position is tailored across all sizes, with steeper seat angles on bigger frames. The Seat tube is also designed for maximum seat post insertion to allow maximum drop. Fox Suspension and Wide-Ranging Shimano XT Groupset This Factory specification is designed as the perfect privateer's race bike. Spec'd with custom-tuned Fox Factory 38 and X2 suspension. The drivetrain is from Shimano’s bulletproof performance 10-51 range XT groupset. The braking performance is from Shimano’s ultra-powerful XT 4 pot brakes. The all-carbon frame rolls on DT Swiss EX1700 wrapped in Maxxis Tubeless Ready tyres. Water Bottle and Accessory Mounts and Integrated Rear Mudguard The Giga is also sculptured to fit a 750ml water bottle (carbon bottle cage included) as well as an accessory mount under the top tube for emergency trail tools. All models also feature an integrated rear mudguard and plenty of clearance for up to 2.5” tyres. The frames feature a clear paint protection kit as standard with 3D contoured rubber downtube, seat and chainstay protection. The Nukeproof GIGA: Gluttony is not a sin. Please Note: Due to severe delays in the bicycle supply chain, we have been forced to make some alterations to the specification of the component parts supplied with this bicycle. As a result, the specification may differ from those shown in the images. Please refer to the specification table for accurate information. Features: Frame: Nukeproof Giga 297 Carbon, 180mm Travel, ultra-strong monocoque UD Carbon Fibre frame, adjustable main pivot, internally piped cable routing, ISCG 05 mounts, Enduro Bearings, Threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured Rubber frame protection and Factory fitted clear paint protection kit covering TT/DT/CS/SS Fork: Fox 38 Float, Factory Series, Kashima, Grip 2 Damper, 180mm, 44mm Offset, BOOST, Orange Shock: Fox Float X2, Factory Series, Kashima, EVOL, 2 Position lever, Custom CM, RM, Rezi CM tune, 205x65mm, Trunnion with Bearing End, 1x 0.3 spacer fitted Front Wheel: DT Swiss EX1700 SPLINE 30, 29"", 6 Bolt, 110x15mm Rear Wheel: DT Swiss EX1700 SPLINE 30, 27.5"", 6 Bolt, Shimano Microspline Driver, 148x12mm Tyres: Front: Maxxis Assegai 29"" x 2.5 WT, 3C Maxx Grip DD TR, Rear: Maxxis Minion DHR II 27.5” x 2.4 WT, 3C MaxxTerra DD TR Crankset: Shimano XT M8100 12-Speed, Hollowtech 2, 170mm, 32T, 52mm Chainline Shifter: Shimano XT M8100-R, 12-speed Rapidfire Plus, I-Spec EV Rear Derailleur: Shimano XT M8100, SGS 12-Speed, Shadow Plus Chain: Shimano XT M8100 HG 12-speed Inc Quicklink Cassette: Shimano XT M8100-12, 12-Speed (HYPERGLIDE+), 10-51T Chain Guide: Nukeproof guide with Bash, 28-36T, ISCG-05, Black Brakes: Shimano XT M8120, 4 Pot Brake, Metallic Pads Front Rotor: Brakco, 203mm Rear Rotor: Brakco, 203mm Handlebars: Nukeproof Horizon V2 25mm Rise, Width - S780mm, M780mm, L800mm Stem: Nukeproof Horizon, 45mm, Black Saddle: Nukeproof, Black Seatpost: Bikeyoke Divine Stealth with Brand-X Remote lever, S:125mm drop; M:160mm drop; L:185mm drop Headset: Nukeproof, 44-56 IITS Grips: Nukeproof Sam Hill Signature Accessories: Nukeproof Carbon Water Bottle Cage Weight: 15.43kg Medium Tubeless Key Information: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 180mm Axle to Crown: 594mm Fork Offset: 44mm Rear Travel: 180mm Wheels Size: Front 29" / Rear 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 28% Shock Size: 205x65mm Shock Hardware F: TRUNNION Shock Hardware R: 30x8mm Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x 6901-2RS MAX, 4x 6902-2RS MAX, 2x6804-2RS MAX, 2x 6900-2RS MAX Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.

VIEW ITEM
Nukeproof Mega 297 Factory Carbon Bike (XT) Full Suspension Mountain Bikes
  • £5399.99

The Mega 297 Factory Carbon features a carbon frame that is equipped with long-travel Fox Factory Kashima coated suspension, a Shimano XT M8100 12-Speed groupset and DT Swiss EX1700 SPLINE 30 wheels. This stylish suspension bike offers an outstanding balance of speed, agility and playful performance and is suited for extreme terrain mountain bike riding, anywhere on Earth. DT Swiss EX1700 SPLINE 30 Wheels and Tubeless Ready Maxxis Tyres This exceptional race bike is kitted out with a Shimano XT 12-Speed drivetrain with a wide gear range that provides smooth and precise gear shifting performance. Shimano XT 4-Pot hydraulic disc brakes feature 4-pistons per-brake caliper that offers powerful and dependable all-weather braking performance. It also rolls upon DT Swiss EX1700 SPLINE 30 wheels wrapped in fast-rolling, Tubeless Ready Wide Trail Maxxis Assegai and Minion DHR tyres. And it is fitted with a Bikeyoke Divine Stealth with Brand-X lever. The MegaV4: Born Through Evolution, Not Revolution. For over 10 years, Nukeproof's best-selling model, the Mega has been racking up awards on Enduro stages and in the press around the world. With 4 Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing. However, they never rest on their laurels with the introduction of the 4th generation Mega - Now available in an all-new mixed wheel size platform. World Class Enduro Race Bike Since 2009 the Nukeproof Mega has been the constant path of development to meet the evolving demands of our riders and customers alike. The Nukeproof team are relentlessly striving for improvements and with each generation, the Mega has been chiselled and shaped into today’s thoroughbred Enduro race bike. With the launch of the Mega 290 Elite, you could forgive their designers for resting on their laurels. However, as Nukeproof products are developed between the tapes, there is a constant desire to hone and refine to give Nukeproof’s athletes and riders the best possible chance of standing on top of the podium. The Mega V4 is now available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel setups, with each frame design tailored around each wheel size. The new mixed platform uses a 29” wheel up front to maximise grip and rolling efficiency whilst the 27.5” wheel out back, ensures nimble handling for manoeuvrability. Designed as an evolution of the ultimate Enduro bike, the Mega V4 has been fully reimagined to offer optimised sizing/fit, improved Geometry and suspension kinematics on a brand-new all-carbon chassis. Most importantly you can now fit a water bottle inside the main front triangle. Long-Travel Full Suspension Carbon Frame To optimise the weight, strength and stiffness, the Mega Carbon frame features a T700/800 UD woven carbon fibre frameset (Front and rear Triangle). The carbon swingarms help reduce the unsprung weight on the rear of the bike. It is available for 27.5”, 297 or 29” wheel sizes. These are totally different, compromise-free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size so that you can get the most out of every ride. Updated Sizing and Geometry Whilst humans may not have changed size much in recent years; the bikes they choose to ride most certainly have. To ensure a perfectly dialled fit Nukeproof now offer 297 bikes in S, M, or L sizes and 290 bikes in M, L, XL or XXL. Lower, longer, steeper and slacker. The Mega geometry is designed around the saddle offset for each size to optimise seated weight distribution. This results in steeper seat angles across the board but especially on larger sizes for taller riders. This in turn results in longer reach figures to ensure a comfortable cockpit on each size. To further aid the perfect fit Nukeproof have also used shorter seat tubes which are designed to maximise seat post insertion depths. Finally, all Mega bikes are now designed to use short offset forks to further improve both climbing and descending capabilities. Progressive and Supportive Suspension Platform To step-change the Mega’s suspension design Nukeproof went back to the drawing board and started afresh. They have redesigned the Mega 4 bar horst linkage to be super supple over small bumps, progressive and supportive throughout the mid-stroke for support when pedalling, cornering and pumping, with increased end stroke leverage to allow more tuning options with volume spacers. The kinematic is designed to have higher levels of anti-squat for climbing gears but this reduces as you drop down the cassette. The result is a bike that is more confidence-inspiring everywhere on the hill. It behaves itself on the climbs yet can still be thrashed through the roughest and most technical terrain on the way back down. Features: Frame: Nukeproof Mega V4 297 Carbon, 165mm Travel, ultra-strong monocoque UD Carbon Fibre frame, internally piped cable routing, ISCG 05 mounts, Enduro Bearings, Threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured Rubber frame protection and Factory fitted clear paint protection kit covering TT/DT/CS/SS Fork: Fox 38 Float, Factory Series, Kashima, Grip 2 Damper, 170mm, 44mm Offset, BOOST, Orange Shock: Fox Float X2, Factory Series, Kashima, EVOL, 2 Position lever, Custom CL, RM, Rezi CM tune, 230x65mm, Bearing End, 2x 0.3 spacer fitted Front Wheel: DT Swiss EX1700 SPLINE 30, 29", 6 Bolt, 110x15mm Rear Wheel: DT Swiss EX1700 SPLINE 30, 27.5", 6 Bolt, Shimano Microspline Driver, 148x12mm Tyres: Maxxis Assegai 3C MAXXGRIP/DD/TR 29" x 2.5WT, Rear: Maxxis Minion DHR II 3C MAXXTERRA/DD/TR 27.5" x 2.4WT Crankset: Shimano XT M8100 12-Speed, Hollowtech 2, 170mm, 32T, 52mm Chainline Shifter: Shimano XT M8100-R, 12-speed Rapidfire Plus, I-Spec EV Rear Derailleur: Shimano XT M8100, SGS 12-Speed, Shadow Plus Chain: Shimano XT M8100 HG 12-speed Inc Quicklink Cassette: Shimano XT M8100-12, 12-Speed (HYPERGLIDE+), 10-51T Chain Guide: Nukeproof guide with Bash, 28-36T, ISCG-05, Black Brakes: Shimano XT M8120, 4 Pot Brake, Metallic Pads Front Rotor: Brakco 203mm Rear Rotor: Brakco 203mm Handlebars: Nukeproof Horizon V2 25mm Rise, Width - S780mm, M780mm, L800mm Stem: Nukeproof Horizon, 45mm, Black Saddle: Nukeproof, Black Seatpost: Bikeyoke Divine Stealth with Brand-X Remote lever, S:125mm drop; M:160mm drop; L:185mm drop Headset: Nukeproof, 44-56 IITS Grips: Nukeproof Sam Hill Signature Weight: 15.39kg Medium Tubeless Key Information: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 170mm Axle to Crown: 584mm Fork Offset: 44mm Rear Travel: 165mm Wheels Size: Front 29" / Rear 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab. Please Note: Due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.

VIEW ITEM
expand_less