After years of rider demands the Zenith was created and now has been upgraded to kick out 2100 lumens, with a long reaching, wider beam, for an hour or combined with TAP technology, the rapid mode change technology, the rider can use the 2100 lumens when plummeting down a steep, fast descent or tackling a technical trail and then TAP to lower the lumens when on the flat or a climb to increase the run time.Tap No button needed - TAP Quickly switch between modes on helmet lights by tapping either the body of the light or the helmet without needing to locate the function button for fast control to match the pace of the trail. Three sensitivities allow greater versatility.Smart Port+ Technology - Smart Port+ enables the charge port to accept auxiliary accessories such as rear lights, remote switches, Support Cells and use your light as a power bank to charge USB devices.Optimised Mode Selector - Various programs in the lights can easily be selected to offer a choice of run times and modes so you can find the right one for your ride, be it an all-night adventure or an intense blast.Intelligent Thermal Management - Patented circuitry within the light will reduce power to the LEDs, if they go beyond the optimum temperature, keeping the light as efficient as possible to maximise output and battery capacity. Once the light has cooled, the power is automatically restored.Fuel Gauge - Using a traffic light system remaining runtime is easily monitored at a glance so you're not caught out. The colour feedback is also used for mode selection, before defaulting back to runtime.In the box: Zenith MK2 GMB, Handlebar Bracket, Helmet Mount, Lanyard, Fast Charger, USB Charge Cable, QS Guide.Specification:LEDs: 3 x White XPL2(W3)IP Rating: IP65Max Lumens: 2100Battery: 5,000 mAh Li-IonRuntime: 1 -18 HoursCharging Time: 5 HoursWeight: 150gMaterial: Anodised 6063 AluminiumLength: 120mmHead Diameter: 41mm
Exposure Link MK2 Front & Rear Combo Bike LightThe Link Front and Rear Combo light is the perfect all-in-one designed bike light that is ideal for any commuter looking for a lighting solution to keep themselves seen against the hustle and bustle of daily traffic. The light has been designed to cut through the distractions of busy roads and visual noise in modern motoring. Allows you stay visible from up to 1km away the front light has a 200 lumen output and the rear side has 25 to give you an intense lighting system that can be seen from both angles.Helmet Mounted with 360° VisibilityHelmet mounted combo light with 360 degree visibility in a prominent position with high power and long battery life. Versatile options of either single or double LED illumination with constant or pulse variations within those options. DayBright flash pattern to cut through distractions of busy roads to alert other road users. Lightweight and Powerful Urban Cycling LightThe lightweight but now more powerful Link is the perfect way to get noticed on busy city roads. Mounting the light up high on the helmet means it is not hidden from view by traffic or other distractions. With 360-degree visibility from a single unit, it gives you the advantage of being noticed first. Features: Cable Free Design DayBright Mode Intelligent Thermal Management Optimum Mode Selector Fuel Gauge Micro USB charging Hand Made in the UK Helmet mount included to mount this light to your bike helmetSpecifications: Output: 200 lumens front, 40 lumens rear (Measured) Weight: 45 grams Burntime: Min 1.5 hrs Max 16 hrs flash Battery Capacity: 700 mAh Li ion Dimensions (mm): Length - 70, Head - 29, Back - 27 LED: 1x XPG3, 1x XPE-R In the Box: Link Mk2, Helmet Mount, Micro USB Charge Cable, QS GuideTechnologies: DayBright: Bespoke pulse pattern designed for daylight use which is more conspicuous than a regular pulse and visible from over a kilometre away, even in the brightest conditions. DayBright mode will get you noticed. Be Seen Be Safe. Cable Free Design (CFD): Battery is housed within the body of the light so there are no cables or separate battery units giving a neat solution with less opportunities for water ingress, mounting difficulties and crash damage. Combined with the renowned quick release handlebar bracket lights are easy and quick to mount with rock solid attachment. Optimised Mode Selector (OMS): Various programs in the lights can easily be selected to offer a choice of run times and modes so you can find the right one for your ride, be it an all-night adventure or an intense blast. Intelligent Thermal Management (ITM): Patented circuitry within the light will reduce power to the LEDs, if they go beyond the optimum temperature, keeping the light as efficient as possible to maximise output and battery capacity. Once cooled the output is automatically restored. Smart Port Technology Plus (SPT+): Smart Port+ enables the charge port to accept auxiliary accessories such as rear lights, remote switches, Support Cells and use your light as a power bank to charge USB devices. Fuel Gauge: Using a traffic light system remaining runtime is easily monitored at a glance so you're not caught out. The colour feedback is also used for mode selection, before defaulting back to runtime.Buy Exposure Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
The lightweight but now more powerful Link is the perfect way to get noticed on busy city roads. Mounting the light up high on the helmet means it is not hidden from view by traffic or other distractions. With 360-degree visibility from a single unit, it gives you the advantage of being noticed first. Specification: Output: 200 lumens front, 40 lumens rear (Measured) Weight: 45 grams Burntime: Min 1.5 hrs Max 16 hrs flash Battery Capacity: 700 mAh Li ion Dimensions (mm): Length - 70, Head - 29, Back – 27 LED: 1x XPG3, 1x XPE-R In the Box: Link Mk2, Helmet Mount, Micro USB Charge Cable, QS Guide Technologies: DayBright Bespoke pulse pattern designed for daylight use which is more conspicuous than a regular pulse and visible from over a kilometre away, even in the brightest conditions. DayBright mode will get you noticed. Be Seen Be Safe. Cable Free Design (CFD) Battery is housed within the body of the light so there are no cables or separate battery units giving a neat solution with less opportunities for water ingress, mounting difficulties and crash damage. Combined with the renowned quick release handlebar bracket lights are easy and quick to mount with rock solid attachment. Optimised Mode Selector (OMS) Various programs in the lights can easily be selected to offer a choice of run times and modes so you can find the right one for your ride, be it an all-night adventure or an intense blast. Intelligent Thermal Management (ITM) Patented circuitry within the light will reduce power to the LEDs, if they go beyond the optimum temperature, keeping the light as efficient as possible to maximise output and battery capacity. Once cooled the output is automatically restored. Smart Port Technology Plus (SPT+) Smart Port+ enables the charge port to accept auxiliary accessories such as rear lights, remote switches, Support Cells and use your light as a power bank to charge USB devices. Fuel Gauge Using a traffic light system remaining runtime is easily monitored at a glance so you’re not caught out. The colour feedback is also used for mode selection, before defaulting back to runtime.
A front and rear combination helmet light that now has been upgraded output to 450 lumens front and 50 lumens rear has the options of being either front, rear, or both. The Link+ sits high above the traffic with 360-degree visibility and the power to be seen over a kilometer away. Prominent illumination whether commuting, training or just riding, day or night.Key Features:450 lumens (White),50 lumens (Red),Weight: 77g,Runtime: 3-32 hours.Day BrightBespoke pulse pattern designed for daylight use which is more conspicuous than a regular pulse and visible from over a kilometre away, even in the brightest conditions. DayBright mode will get you noticed. Be Seen Be Safe.ITMPatented circuitry within the light will reduce power to the LEDs, if they go beyond the optimum temperature, keeping the light as efficient as possible to maximise output and battery capacity. Once cooled the output is automatically restored.OMSVarious programs in the lights can easily be selected to offer a choice of run times and modes so you can find the right one for your ride, be it an all-night adventure or an intense blast.
Ripping through the single track or trail the combination of 3 spot lens to launch light far down the track, a spread beam to highlight the trail edge and REFEX ++ to Automatically provide the perfect output for any change is speed or terrain the Maxx-D is backed up with 4400 measured Lumens to be at one with the trial.Key Features:Output:,Reflex 4400 lumens,2700 lumens.Weight: 310g,Runtime:: 2-36 hours.REFLEX++Reflex automatically adjusts the light to provide boosted output when riding hard and fast then intuitively dimming for the slower sections such as climbs. This is all to optimise battery capacity, to provide extra light when needed and save it when not required.Reflex achieves this by using data from 3D digital accelerometers including gyroscope and thermistors. It continually analyses the data to make seamless adjustments to benefit the rider, probably better than the rider can. It is a form of artificial intelligence. The selected run time will be achieved by averaging the output over the period.ITMPatented circuitry within the light will reduce power to the LEDs, if they go beyond the optimum temperature, keeping the light as efficient as possible to maximise output and battery capacity. Once cooled the output is automatically restored.OSDAn LED display panel that gives clear information on which mode the light is in, runtime remaining in hours and minutes, percentage charged and feedback information during OMS. Patent Protected.OMSVarious programs in the lights can easily be selected to offer a choice of run times and modes so you can find the right one for your ride, be it an all-night adventure or an intense blast.
Exposure MaXx-D MK14 Front LightStay illuminated when cycling after dark or in low light, thanks to this powerful Front Bike Light from Exposure. Featuring Exposure's Reflex+ technology, this light has a dazzling maximum output of 4400 lumens, so you know you'll be kept seen and safe when cycling. Lighting up your way, it is set within a durable anodised aluminium casing and has a waterproof rating of IP65, making it ideal for riding in all weather conditions.Optimised for Off-Road RidingRipping through the single track or trail the combination of 3 spot lenses to launch light far down the track, a spread beam to highlight the trail edge and REFEX++ to Automatically provide the perfect output for any change in speed or terrain the Maxx-D is backed up with 4400 measured Lumens to be at one with the trial.Powerful Front Cycle LightOn the rear of the light, there is an in-built OLED status display that shows all the key information you require, Programme and mode information plus battery time remaining in hours and minutes. Intelligent Thermal Management controls the temperature of the LEDs ensuring your light will never overheat and remain as efficient as possible, connect to the SYNC Bluetooth app and this will offer you full control of the light which is useful when using more than one compatible SYNC light.Reflex++ Automatic Light AdjustReflex automatically adjusts the light to provide boosted output when riding hard and fast then intuitively dimming for the slower sections such as climbs. This is all to optimise battery capacity, to provide extra light when needed and save it when not required.Reflex achieves this by using data from 3D digital accelerometers including gyroscopes and thermistors. It continually analyses the data to make seamless adjustments to benefit the rider, probably better than the rider can. It is a form of artificial intelligence. The selected run time will be achieved by averaging the output over the period.OLED Status Display (OSD)An LED display panel that gives clear information on which mode the light is in, runtime remaining in hours and minutes, percentage charged and feedback information during OMS. Patent Protected.Intelligent Thermal Management (ITM)Patented circuitry within the light will reduce power to the LEDs, if they go beyond the optimum temperature, keeping the light as efficiently as possible to maximise output and battery capacity.Smart Port+Smart Port+ enables the charge port to accept auxiliary accessories such as rear lights, remote switches, and Support Cells and use your light as a power bank to charge USB devices.Optimum Mode SelectorVarious programs in the lights can easily be selected to offer a choice of run times and modes so you can find the right one for your ride, be it an all-night adventure or an intense blast.Fuel GaugeUsing a traffic light system remaining runtime is easily monitored at a glance so you're not caught out. The colour feedback is also used for mode selection, before defaulting back to the runtime.Features: Max Output: 4400 Max Output with Reflex: 2700 Min Burn Time (hrs): 2 Max Burn Time (hrs): 36 Handlebar Mounted: Yes Stem Mounted: Optional Extra Helmet Mounted: Optional Extra Reflex Technology: Yes OLED Status Display: Yes Smart Port Technology: Yes Cable Free Design: Yes Intelligent Thermal Management: Yes Optimum Mode Selector: Yes Fuel Gauge: Yes LEDs: 4 XPL2(W3) Internal Li-Ion Battery: Yes Support Cell: Optional Extra Charger: 5A Charge Time (hrs): 6 Smart Charger: Yes Weight (g): 310 Length (mm): 115 Head (mm): 54 Back (mm): 50 Rating: IP65 Battery Capacity (mAh): 13600Buy Exposure Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
MaXx-D Sync Mk4Maxx-D SYNC has a smoother App to allow the light to be, through a smart phone, programmed to tailor the light output or burn time to fit to the needs of the ride ahead, mode changeable via Bluetooth remote. 3 LEDs with spot Lens and 1 with spread combine to shine far down the track and highlight the trail edge at the same time. Backed with 4400 of measured Lumens through REFLEXX++ to automatically provide the right light when required.Key Features:Output:,Reflex 4400 lumens,2700 lumens.Weight: 310g,Runtime:: 2-36 hours.REFLEX++Reflex automatically adjusts the light to provide boosted output when riding hard and fast then intuitively dimming for the slower sections such as climbs. This is all to optimise battery capacity, to provide extra light when needed and save it when not required.Reflex achieves this by using data from 3D digital accelerometers including gyroscope and thermistors. It continually analyses the data to make seamless adjustments to benefit the rider, probably better than the rider can. It is a form of artificial intelligence. The selected run time will be achieved by averaging the output over the period.Diablo Sync Mk4The Diablo SYNC gives you the widespread, high-powered beam of a Diablo with SYNC Bluetooth connectivity for wireless mode changing and customisable runtimes via a smart phone and an updated app to get exactly what you need out it to keep you riding on the edge. Also available with in a pack with an additional Support Cell for longer runtimes.Key Features:Output: 1900 lumens,Weight: 120g,Runtime: 2-36 Hours.SYNC SYNC allows you to control the light with a remote switch and to make custom programs in the Exposure SYNC App, additionally both helmet and handlebar lights can be simultaneously controlled with a single remote via Bluetooth connectivity. App is available in both iOS and Android platforms.MaXx-D Sync Mk4 and Diablo Sync Mk4ITMPatented circuitry within the light will reduce power to the LEDs, if they go beyond the optimum temperature, keeping the light as efficient as possible to maximise output and battery capacity. Once cooled the output is automatically restored.OSDAn LED display panel that gives clear information on which mode the light is in, runtime remaining in hours and minutes, percentage charged and feedback information during OMS. Patent Protected.OMSVarious programs in the lights can easily be selected to offer a choice of run times and modes so you can find the right one for your ride, be it an all-night adventure or an intense blast.
Maxx-D SYNC has a smoother App to allow the light to be, through a smart phone, programmed to tailor the light output or burn time to fit to the needs of the ride ahead, mode changeable via Bluetooth remote. 3 LEDs with spot Lens and 1 with spread combine to shine far down the track and highlight the trail edge at the same time. Backed with 4400 of measured Lumens through REFLEXX++ to automatically provide the right light when required.Key Features:Output:,Reflex 4400 lumens,2700 lumens.Weight: 310g,Runtime:: 2-36 hours.REFLEX++Reflex automatically adjusts the light to provide boosted output when riding hard and fast then intuitively dimming for the slower sections such as climbs. This is all to optimise battery capacity, to provide extra light when needed and save it when not required.Reflex achieves this by using data from 3D digital accelerometers including gyroscope and thermistors. It continually analyses the data to make seamless adjustments to benefit the rider, probably better than the rider can. It is a form of artificial intelligence. The selected run time will be achieved by averaging the output over the period.SYNCSYNC allows you to control the light with a remote switch and to make custom programs in the Exposure SYNC App, additionally both helmet and handlebar lights can be simultaneously controlled with a single remote via Bluetooth connectivity. App is available in both iOS and Android platforms.ITMPatented circuitry within the light will reduce power to the LEDs, if they go beyond the optimum temperature, keeping the light as efficient as possible to maximise output and battery capacity. Once cooled the output is automatically restored.OSDAn LED display panel that gives clear information on which mode the light is in, runtime remaining in hours and minutes, percentage charged and feedback information during OMS. Patent Protected.OMSVarious programs in the lights can easily be selected to offer a choice of run times and modes so you can find the right one for your ride, be it an all-night adventure or an intense blast.
Exposure Micro USB Charger CableA micro USB charging cable that will charge your Exposure bike light via any standard USB port.CompatibilityThe Mico USB Charger Cable is compatible with the following Exposure lights:SwitchLinkLink PlusTraceTraceRFeaturesCompatible with all Exposure’s current commuter lightsBuy Exposure Accessories from Chain Reaction Cycles. Ride. Eat. Sleep. Repeat.
The connector is a female to female block that helps charge your support cell via a charger or a USB cable
Exposure Piggyback Support Cell Charger ConnectorA small but convenient part that connects a charger or USB cable to a support cell for charging.FeaturesHelps connect a charger to a USB support cellFemale to female blockBuy Exposure Accessories from Chain Reaction Cycles. Ride. Eat. Sleep. Repeat.
The QR Band is for use with the Sirius Handlebar Mount, Trace, TraceR, Flash, Flare and saddle rail bracket. The silicone band is a one size fits all option for quick safe attachment of your mount and light to your bike