Introducing the Brand-X Ascend Dropper Seatpost shifter style lever kit. The ergonomic shifter style remote lever is designed to go where your front shifter would normally sit. This means that this kit is ideally suited for those using a 1x chain ring set up, without a front derailleur.Material: AL6061-T6Shimano I-Spec mount shifter style remote leverCable Length: 1.5mWeight: 40.7g (excluding cable)Adjustment: +10 degrees angle range and +7mm horizontal adjustmentFinish: Sand blasted and hard anodised blackWarranty: 2 Year
Brand-X Ascend Lever Kit V2 - (1 x Gears) I-Spec This ergonomic shifter style dropper remote lever is designed to be positioned where your front shifter would normally sit. This means it's perfectly suited for riders who are using a 1x chain ring set up, without a front derailleur. This superb lever kit is compatible with all the Brand-X Ascend dropper seatposts and other cable actuated posts for a smooth and effortless operation.Adjustable Dropper Remote Thanks to its adjustable angle range of +10 degrees and a horizontal adjustment of +7mm, you can enjoy a more customised fit to suit your preferred hand position. Plus, with this model, it neatly combines with Shimano I-Spec II brake levers to free up space on your bars and give a clean look. To top it off, the cables can be installed at either end, so you can either route the cable ferrule into the lever, or you can use the screw and install the cable at the post. Please Note: This particular lever kit is only compatible with Shimano hydraulic brake levers with I-Spec II fitment and does not include a handlebar mounting collar.Features: Material: 6061-T6 AluminiumFinish: Sand blasted and hard anodised black Compatibility: Shimano I-Spec II Diameter: 22.2mm Cable Length 1.5m Cable Housing: 1500mm (inner cable 1710mm) I-Spec II mounted shifter style remote lever Weight: 40.7g (excluding the cable 64g)Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This ergonomic shifter style remote lever is designed to be positioned where your front shifter would normally sit. This means that this kit is ideally suited for riders who are using a 1xchain ring set up, without a front derailleur. This stunning lever kit is compatible with all the Brand-X Ascend dropper posts and other cable actuated posts for a smooth and effortless operation. Adjustable Dropper Remote Thanks to its adjustable angle range of +10 degrees and a horizontal adjustment of +7mm, you can enjoy a more customised fit to suit your preferred hand position. To top it off, the cables can be installed at either end so you can either route the cable ferrule into the lever, or you can use the screw and install the cable at the post.
This ergonomic shifter style remote lever is designed to be positioned where your front shifter would normally sit. This means that this kit is ideally suited for riders who are using a 1xchain ring set up, without a front derailleur. This stunning lever kit is compatible with all the Brand-X Ascend dropper posts and other cable actuated posts for a smooth and effortless operation. Adjustable Dropper Remote Thanks to its adjustable angle range of +10 degrees and a horizontal adjustment of +7mm, you can enjoy a more customised fit to suit your preferred hand position. To top it off, the cables can be installed at either end so you can either route the cable ferrule into the lever, or you can use the screw and install the cable at the post. Please Note: This particular lever kit is only compatible with Shimano hydraulic brake levers with I-Spec II fitment and does not include a handlebar mounting collar.
Introducing the Brand-X Ascend Paddle Lever Kit (2x-3x Gears). This ergonomic paddle style remote lever is designed to sit next to your front shifter, allowing you to run your Ascend dropper seatpost when using a front derailleur and shifter.Material: AL7075-T651Bar mounted paddle style remote leverCable operatedCable Length: 1.5mFinish: Sand blasted and hard anodised black
Brand-X Ascend Paddle Lever Kit (2x/3x Gears)Introducing the Ascend Paddle Lever Kit from Brand-X. The paddle style remote lever is ergonomically designed to sit next to your front shifter, allowing you to run your Ascend dropper seatpost when using a front derailleur and shifter.Features:Material: AL7075-T651Bar mounted paddle style remote leverCable-operatedCable Length: 1.5mFinish: Sandblasted and hard anodised black2 Year WarrantyBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The ergonomic shifter style remote lever is designed to go where your front shifter would normally sit. This means that this kit is ideally suited for those using a 1x chainring set up, without a front derailleur.V2 Upgrade:Material: AL7075-T651 ,Bar mounted shifter style remote lever,Cable operated ,Cable Length: 1.5m ,Finish: Sandblasted and hard anodized black ,2 Year Warranty.V2 I-Spec Upgrade:Material: AL7075-T651 ,Shimano I-Spec mount shifter style remote lever ,Cable operated ,Cable Length: 1.5m ,Finish: Sandblasted and hard anodized black ,2 Year Warranty.
Designed as a sacrificial component to save damage to the rear mech and/or frame in the event of an impact, a replacement gear hanger is essential for your spares box.
Brand-X have partnered with South Korean lighting specialist LightSKIN to offer you a seatpost with a difference. Switch the light on and change modes with one short press of the 1st LED. Press and hold the LED to switch the light off. The post has 3 light modes and kicks out 25 Lumens offering eyecatching visibility as the nights draw in. Offering 50 hours battery life in continuous light mode and 100 hours in flashing the Brand-X LightSKIN Seatpost is a workhorse and a minimilists dream. Lightskin have geniune credibility in this area and won the Prestigious Red Dot design award with this very product. Install the batteries at the base of the post, attach your saddle with the single bolt seat rail clamp and ride in style. Ideal for commuters and for those of us that that forget our lights or fear them being stolen.
Brand-X have partnered with South Korean lighting specialist LightSKIN to offer you a seatpost with a difference. Switch the light on and change modes with one short press of the 2nd LED. The post has 4 light modes and kicks out 25 Lumens offering eyecatching visibility as the nights draw in. Offering 10 hours battery life in continuous light mode and 50 hours in pulse mode, the Brand-X LightSKIN Seatpost is a workhorse and a minimilists dream. The post comes with a 2 metre micro usb charge cable allowing you to charge from home with the bike parked up. The charging port is located at the head of the post and is protected with a rubber cap Ideal for commuters and for those of us that that forget our lights or fear them being stolen.
Brand-X PLUS Sealed Bearing (6000-V2RS)Brand-X Plus bearings are a high quality replacement sealed cartridge bearing, specifically designed for suspension pivots. Standard radial bearings use 14 balls, whereas Brand-X has squeezed the maximum number of 25 balls into each PLUS bearing. This means that they have a much higher load capacity and improved resistance to lateral forces. 2x rubber seals keep the elements out and the grease in, which will keep them running smooth. Precision engineered from SUJ2 Steel for high strength and durability.Features: Precision engineered, replacement sealed cartridge bearing for suspension pivots Additional bearings give a higher load capacity and improved resistance to lateral forces Rubber seals protect from the elements SUJ2 steel gives high strength and durability Size: 10x26x8mmBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X PLUS Sealed Bearing (6001-V2RS)Brand-X Plus bearings are a high quality replacement sealed cartridge bearing, specifically designed for suspension pivots. Standard radial bearings use 14 balls, whereas Brand-X has squeezed the maximum number of 25 balls into each PLUS bearing. This means that they have a much higher load capacity and improved resistance to lateral forces. 2x rubber seals keep the elements out and the grease in, which will keep them running smooth. Precision engineered from SUJ2 Steel for high strength and durability.Features: Precision engineered, replacement sealed cartridge bearing for suspension pivots Additional bearings give a higher load capacity and improved resistance to lateral forces Rubber seals protect from the elements SUJ2 steel gives high strength and durability Size: 12x28x8mmBuy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.