The all new DMR Blade chainring is now 12 speed compatible. The DMR Blade chainring is now 10, 11 and 12 speed compatible. The DMR Blade MTB chainring has a Wide/Narrow tooth design for ultimate chain retention and when combined with a clutch mech, no chain device is needed. This DMR chainring is manufactured from stiff 4mm wide 7075-T6 Aluminium maintaining direct power transfer. Superlight: 30T- 63g | 32T- 67g | 34T- 74g | 36T- 85g. Save 100g on your spider, chainring and chainring bolts setup. DMR Blade chainring is compatible with any cranks using the SRAM DM interface. Wide/Narrow tooth design for maximum chain retention. Specification Stiff 4mm wide 7075-T6 Aluminium. This direct mount chainring is compatible with SRAM DM interface. Fits Shimano/KMC/SRAM 10, 11 and 12 speed chains. 6mm offset for standard rings, 3mm offset for Boost.
For the 2.4" version of the Direct Tyre, United tweaked the pattern to make it their faster street ready tyre ever. Designed and developed with inpur from their team riders, the Direct Tyre features a directional tread pattern with a wider centre for improved stability and a fine micro-knurling across the whole surface further improving grip. Max pressure rating: 110 psi ###section### Product Specs WHEEL SIZE: 20" MAX PRESSURE: 110 PSI WEIGHT: 799g (28.2oz) PACK SIZE: Single
The Burgtec Direct Mount Stem Spacer is a no fuss mod for racers who want to lift the front end of the DH bike. Perfect for steeper tracks the Spacer allows you to adjust the height of your front end by sitting between your stem and crown.Fits BoXXers, Fox 40, DVO, Manitou, Marzocchi any other forks that use IS mountOnly available in 5mm stack heightWeight 15 gramsColour Burgtec BlackIncludes bolts
The Shimano FD-M4100 2x10-speed front derailleurs use Shimano's new side swing technology for enhanced cable routing, light action, and smooth operation. The new design also increases clearance for large wheels and short chain stays.Wide link design 10-speed Deore MTB front derailleurSide swing, side pull front derailleur decrease problems with tyre clearance and reduces cable frictionDesigned specifically with modern trail bikes in mind, Shimano side swing technology front derailleurs increases tyre clearance, while cable routing resulting in the lightest shifting action yetSide pull cable routingWide pivot link design for greater torsional rigidity improves shifting response and service lifeDirect frame fit for easy and accurate installation giving perfect alignment10-speed MTB drivetrain compatibilityReinforced steel chain guide offers high strength and rigidity for improved shifting responseFor double 38 tooth max chainringChainline both 48.8/51.8mm
Delivering quiet and smooth shifting, Shimano's FD-M5100 11-Speed front derailleurs feature Shimano's new Side Swing technology. The new design offers enhanced cable routing, light action, and increases clearance for large wheels and short chain stays.Wide link design 11-speed Deore MTB front derailleurSide swing, side pull front derailleur decrease problems with tyre clearance and reduces cable frictionDesigned specifically with modern trail bikes in mind, Shimano side swing technology front derailleurs increases tyre clearance, while cable routing resulting in the lightest shifting action yetSide pull cable routingWide pivot link design for greater torsional rigidity improves shifting response and service lifeDirect frame fit for easy and accurate installation giving perfect alignment11-speed MTB drivetrain compatibilityReinforced steel chain guide offers high strength and rigidity for improved shifting responseFor double 38 tooth max chainringChainline both 48.8/51.8mm
This Race Face Direct Mount Oval Chainring is engineered for aggressive MTB use as it uses its ovalised design to give you impressive and powerful torque on the toughest of rides. It features a hard-wearing 7075 aluminium construction, which makes it perfect at handling all the abuse that's associated with all-day epics in the mountains. Race Face has also equipped this oval chainring with a direct mount profile for fast and easy installation to your ride. Please note: Not compatible with Shimano 12 speed chains.
Nukeproof Shimano Steps Direct Mount Chain GuideCarefully developed to work with Shimano Steps electric bike (E-bike) motors, this chain guide features a backplate that's made from a lightweight alloy and it's available in six different colour options to complement your ride. Coming equipped with a durable nylon top guide with a co-moulded rubber inset, this model also offers a reduction in noise from your chain. Its top guide has also been extended to provide you with extra protection from your chain/chainring compared to the normal ISCG version. One final highlight is it's easy to install on most bikes without having to remove your cranks.The guide is supplied with various washers allowing you to fine-tune it to suit your chain line.Features: Backplate Material: Alloy Hardware Material: Stainless Steel Use: Shimano Steps E-Bike Compatible Chain Ring Sizes: 32T - 38T Compatible With: EP800, E8000, E8080, E7000 and EP8Manufacturer's Part Number: NUKSSCGBLK Black NUKSSCGRED Red NUKSSCGBLU Blue NUKSSCGCOP Brown Copper NUKSSCGGRY Grey NUKSSCGPUR PurpleBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Blackspire Snaggletooth Shimano MTB Chain RingThis 12 speed chainring is specifically designed for intense MTB riding as it gives you incredible torque power and control on the toughest rides. It features a rock-solid aluminium construction, which has been put through a CNC-machining process to deliver maximum strength without adding any unnecessary weight to your mountain bike. Coming equipped with the highly sought after narrow/wide Snaggletooth profile, this chainring can be combined with any modern day clutch derailleur without worrying about dropping your chain. Features: Material: CNC-machined 7075-T6 Aluminium Use: MTB Speed: 12 speed Compatibility: ShimanoBuy Blackspire Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Effetto Mariposa Mangiacatena Chain CleanerThe Mangiacatena Chain Cleaner from Effetto Mariposa is a durable, efficient and fast acting chain cleaning device that scrubs deep into chain links. This high-performance chain cleaner thoroughly cleans all chain speeds, from single speed all the way up to 10, 11, 12 and 13-Speed chains.If you want to clean the chain in a thorough way and reduce the amount of degreasing liquid used, Mangiacatena is the one for you. It is the first chain cleaner equipped with lamellar elements at both ends, so that the chain can be cleaned by moving it in both directions, very useful also for electric bikes (E-Bikes). Equipped with six rotating brushes and a sturdy handle.Chain Cleaning with Minimum WasteThere is nothing wrong with cleaning the chain with the classic brush and solvent liquid in a tin. In that way, however, a lot of solvent is wasted without getting to a deep cleaning, unless you want to disassemble the chain and immerse it in the solvent. To avoid disassembly and clean in depth, we have developed Mangiacatena: the best cleaning with the least amount of solvent, in a short time, leaving the chain on the bike.Please Note: Reducing the amount of solvent used doesn't mean that cleaning takes place without getting dirty. Better to protect the floor with a cloth or work outside.Deep Cleaning FormulaThe chain runs straight inside Mangiacatena, squeezed at both ends between lamellar plastic (PE) elements with the task of keeping as much solvent inside as possible. The washing is performed by six rotating brushes, continuously soaked in the cleaning liquid, which actively remove dirt on each side, pushing the solvent inside the chain.Instructions for Use: Open Mangiacatena by removing the cover and positioning the lower part of Mangiacatena on the bottom span of the chain Mount the cover making sure it's perfectly aligned with the lower part, then slide the locking handle in place until it is fully engaged Add the degreasing liquid through the upper holes (it is recommended to use Effetto Mariposa Allpine Extra) until the lower tank is full to the “FILL” level line Keeping Mangiacatena in position with the side handle, pedal backwards for at least 10 full revolutions Note: the two lamellar elements at both ends reduce the waste of solvent, but slow down the sliding of the chain at least in the initial phase… so don't be afraid, just hold the Mangiacatena firmly Note: thanks to the lamellar elements, Mangiacatena allows - without wasting solvent - to pedal in both directions. To do this, it is recommended keeping the rear wheel of the bicycle off the ground (using a workshop stand or other support) It is now possible to move Mangiacatena: release the side locking handle by depressing the thumb lever and remove it, open the cover, disassemble Mangiacatena from the lower span of the chain and position it, as already described, on the upper span of the chain, for a second cleaning step. Add more degreaser if necessary Keeping Mangiacatena in position using the side handle, pedal backwards for at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of in accordance with the law if you use non-biodegradable degreasers or lubricants) Water rinse: mount Mangiacatena on the lower span of the chain, add water through the top holes and make at least 10 full revolutions Disassemble Mangiacatena and empty the liquid contained inside (dispose of in accordance with the law if you use non-biodegradable degreasers or lubricants). Repeat from point 8 until perfect rinsing. At the end, rinse Mangiacatena with water and allow to air dry Dry the chain (rag, compressed air) and do not forget to lubricate it (we recommend our ecological Flowerpower Wax lubricant) Effetto Mariposa have selected Mangiacatena materials and construction for a long life. They also provide a complete set of replacement brushes, Mangiacatena Replacement Kit, to replace what you wear without having to throw everything away. They have also chosen to use lamellar PE elements at both ends, instead of the more common sponges, for their greater durability and resistanceFor Single-Speed Transmissions and 5 to 13 Speed ShainsThe chain runs straight inside Mangiacatena, instead of following a tortuous path, making it also suitable for single-speed transmissions (for a chain with a maximum width of 9 mm). No problem for traditional 5 to 13 speed chains.Features: The best way to clean the chain with minimum consumption of degreasing liquid The lamellar elements at both ends retain dirt and liquid inside Mangiacatena, while the six rotating brushes - continuously wet with degreaser - also act mechanically on the chain It can be used both on the lower and upper part of the chain, pedaling in both directions Degreasing liquid or water can be added from above, without the need to open Mangiacatena Made of shockproof and solvent resistant plastic. It can be refurbished with the appropriate replacement brush kit It works with single-speed transmissions (maximum chain width: 9 mm) and 5 to 13 speed chains Buy Effetto Mariposa Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Race Face Direct Mount Oval ChainringRace Face’s tough and hard-wearing Direct Mount Chainring will help you to dominate the toughest trails. Made from 7075 aluminium and enhanced with Race Face’s renowned “Narrow Wide” teeth, it's ready for all the abuse the trail can dish out and will keep your chain held in place as you power over the roughest sections. Compatible with all Cinch cranksets, the direct mount design means you can install it with minimal effort and get back to riding in no time.Features: Material: 7075 Aluminium Speed: 1x9, 1x10 and 1x11-Speed Bolt Circle Diameter (BCD): Direct mountCompatibility: Race Face Cinch cranksets Shape: OvalUse: Cross Country (XC), Trail, All-Mountain (AM) and EnduroNarrow Wide tooth profile provides unbeatable chain retention Weight: 72g (32T)Buy Race Face Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano M3120 Alivio Double Front DerailleurReady for on and off-road adventures, this versatility front mech offers crisp performance for 9 speed drivetrains. It features a side-swing side-pull design, which decreases problems with tyre clearance and also reduces cable friction. This makes it perfect for use with modern trail bikes as its side-swing technology results in the lightest shifting action yet. One final highlight is its wide pivot link delivers greater torsional rigidity, improves shifting response and offers a longer service life. Features: Carrier Material: Alloy Use: MTB Speed: 2x9 speed Swing: Side swing Cable Routing: Side pull Pivot Link: Wide pivot link Compatibility: For bike designs with 66-69 degree chainstay to seat tube angle Max Chainring: For double 36 tooth max chainring Chainline: For 51.8mm chainline Drivetrain Compatibility: Compatible with 9-speed drivetrains Single or Pair: SinglePart Numbers: Low Clamp Side Pull Low Clamp: FDM3120MBX4; Low Clamp Side Pull Direct Mount: FDM3120D4; E-Type Side Pull E-Type: FDM3120E4; High Clamp Side Pull High Clamp: FDM3120MX4Technologies: Side Swing: Side swing, side pull front derailleur decrease problems with tyre clearance and reduces cable friction. Designed specifically with modern trail bikes in mind, Shimano side swing technology front derailleurs increases tyre clearance, while cable routing resulting in the lightest shifting action yet. Wide Pivot Link: Wide pivot link design for greater torsional rigidity improves shifting response and service life.A 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
KS-D625Direct Mount BR-RS505/805Dura Ace BR-R9170Ultegra BR-R8070BR-RS805BR-RS505BR-RS405BR-RS305KS-D625SWith copper plated backing plate and sintered front for extreme conditions like down hill, suitable for the same range as D625