The ultimate pedal for enduro racing and riding.The Mallet E was developed with the help of some well-known enduro athletes. 12% smaller than the Mallet DH pedals but with many of its well-loved features.There are 2 different axle lengths available 52mm or 57mm (the 57mm pedal is only available in a half black/half blue colour option). The 52mm will provide an engagement point and Q factor similar to other brands of pedals. If you have been previously using the Mallet DH pedal you may benefit from using the longer axle version. Riders who prefer a wider Q factor / have less crankarm / pedal clearance may also benefit from the longer axle pedals. Key Features:Concave pedal platform for a secure foothold. Like it's DH equivalent you get that flat pedal feel whilst running clipless.,49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent.,Ribbed body allows for better traction when unclipped,Chamfered edges for a reduction in rock strikes,Excellent mud-shedding: the design is very open.,4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.,Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling.,Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these).,Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.,Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike.,Inner Igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails.Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.,Crank brothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit (CRB-16051)..
Rolling on fully sealed cartridge bearings, this clipless pedal is fully compatible with Look Arc cleats. Black body with blue RSP logos.Key Features:Look Arc compatible cleats,Lightweight alloy body,Sealed bearings,CNC machined axles.
Key Features:Compact dual sided SPD pedal designed for everyday use at good value price,Stable platform can be used with any type of SPD shoe and provides support for the foot,Mud repelling design is suitable for year round use,Cr-Mo spindle and low maintenance sealed bearing cartridge axle,Cleat tension adjustment,Weight: 352 grams per pair.
Key Features:Ideal pedal for recreational riders who commute and tour,Combines SPD mechanism on one side and flat pedal body on the other, you can ride with cleats or normal shoes,Serviceable cup and cone bearings add to long life of the pedals,Adjustable cleat tension means you can start off with loose tension for extra easy engagement and release, and turn up the tension as you progress,Weight: 533 grams.
The Shimano M520 SPD Clipless MTB pedals are dual sided and super compact. This is an entry level clip-in pedal that makes for easy learning. Key Features : Dual-sided SPD pedals, ideal for urban or off-road riding,Super-compact and lightweight design,Sealed cartridge bearing spindle offers smooth pedal action,Open design helps shed mud for all-year-round use ,Colours : Black, White, Silver,Weight : 380 grams per pair,Included : SM-SH51 cleats,.The pedal mechanism adjustments are easily accessible allowing to get the fit right for you. Sealed cartridge bearings and a steel axle make these pedals reliable and robust. The M2520 pedals are so versatile and are great for commuters, mountain bikers, and even cyclo-cross/gravel riders.
Key Features:Highly durable upper fabrics with perforated panels for enhanced ventilation,Low absorbency quick dry lining,EGM footbed maximises comfort and power transfer,StickyFoot,Grip pedal contact areas provide great connection with caged and clipless pedals,Toe and heel sections deploy StickyFoot,Dura in an aggressive tread pattern to provide superb walking grip and durability.,Offset cleat box with increased longitudinal adjustment provides a wide range of stance option for caged or traditional clipless pedals,Flex profile balances stiffness and flex for power transfer and control,Traditional laces and additional Velcro strap lock your feet in place,Sharkskin fabric lined heel cup helps hold foot in place,Reinforced toe and heel box offer protection from flying trail debris.
Clip-in and go tear up your favourite mountain bike trails with the superb comfort and pedalling efficiency of the Leatt DBX 4.0 Clipless Shoes. The rugged build is also tuned to take on the rigours of all your MTB riding adventures.For gravity riders who prefer the feel and security of clipping into the pedals, the DBX 4.0 Clipless Shoes are for you. The ClipGrip Sole features an extended adjustment range for your cleats so you can get your pedalling position perfected. The rigid mid-sole also delivers trail-slaying efficiency. The sole unit takes the RideGrip Compound from their flat pedal shoes to ensure even if you're not clipped in, you'll enjoy a superbly secure and grippy hold of the pedals too. And with a flexible toe area and mud-flow channels to clear the sole, you'll enjoy sure-footed grip when you're off the bike and pushing.The DBX 4.0s are also built tough. Made from synthetic leather, they can take the daily use and abuse of mountain biking and still come out smiling. The water-resistant upper and weatherproof tongue also let you take on wet and muddy trails with ease. It's easy to clean too - bonus. With reinforced toe, heel and Achilles you'll avoid bumps and bruises from debris kicked up off the trail while the mid-height ankle protection prevents the sting of cranks strikes on this delicate area. Lastly, the lace and Cross-tension straps provide a super-secure fit for both comfort and pedalling efficiency. What more could you want when ripping MTB trails? Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard), e.g.: Shimano SPD, Time ATAC, CrankBrothers, CrankBrothers Race, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB. Key Features: ClipGrip Sole: Unique extended SPD channel adjustable for Gravity Riding,Optimized grip pattern in pedal area,Grippy heel and toe siping with mud-flow channels,RideGrip Compound: Secret sole formula - sticky grip even on wet and slippery surfaces,Mid Sole: Mono-directional flex - Rigid on pedals, flexible in toe area,Upper: Cross-tension straps for pedal efficiency and weather protection,Upper: Synthetic Leather - Water-resistant and easy to clean,Tongue: Low-profile, padded and weather-resistant,Protection: Inner ankle mid-height protection,Reinforcements in toe, heel and Achilles.
The design for the original crankbrothers pedal began out of frustration. The founders of crankbrothers, Carl and Frank, were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The candy 7 pedal is a clipless pedal with a platform offering improved stability across a wide range of disciplines from all mountain / trail to cyclo-cross. The pedal body is 10% larger than the level 1, 2 and 3 pedal bodies. The chamfered edges help to minimise rock strikes.There is an ongoing debate amongst many riders about which is best, candy or eggbeater. The candy pedal provides an additional platform which is confidence inspiring and also gives some support or those moments when you’ve unclipped but are unsure if you need to get your foot down for a dab, jump off the bike or quickly get clipped in again and put the power down.Key Features:Excellent mud-shedding: the design is very open.,Ribbed body for extra traction when unclipped,4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.,Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike, while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling.,Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these).,Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.,Chamfered edges help reduce rock strikes,Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike.,Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. ,Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.,crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit (CRB-16051)..Specifications:Weight (per pair): 320g,Spindle: Forged scm 435 chromoly steel,Body: 6061-T6 aluminium,Wings: 17-4PH stainless,Spring: 300 series stainless steel,Inner bearing: Igus LL-glide bearing,Outer bearing: Enduro cartridge bearing,Cleats: Premium brass cleats included,Release angle: 15° or 20°,Warranty: 5 years.
The crankbrothers candy is an iconic pedal designed by Carl and Frank, the original founders of crankbrothers, they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail, at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area.Key Features:Cleat: Premium brass cleats included,Shims: Included,Release Angle: 15° to 20°,Warranty: 5 years,Weight: 304g per pair,Spindle: Forged scm435 chromoly steel,Body: 2 piece machined aluminium,Wings: Cast Steel,Spring: 300 series stainless steel,Inner bearing: Needle,Outer bearing: Cartridge,Maximum rider weight: No restrictions,Colour options: Black/Silver, Blue/Silver or Red/Silver,.You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). These shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal).As with the rest of the crankbrothers range the pedals are fully serviceable with a level 3 / 11 service kit (product code CRB-11730). Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
Choose to ride flat or clipped in. The new double shot is crankbrothers hybrid pedal designed half flat / half clip-in.Moulded traction pins and diamond plate area provide grip and support. Key Features:Excellent mud-shedding: machined pedal body helps further prevent mud clogging.,Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these).,Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. ,Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal..
Mallet pedals feature a double sided open design allowing for quick and reliable engagement with minimal mud clogging. A two piece body keeps the weight down whilst providing a strong and durable platform.Key Features:Release angle: 15° to 20°,Cleat: Premium brass cleats included,Warranty: 5 years,Weight: 428g per pair,Platform: Two piece aluminium + composite,Wings: Stamped steel,Spring: 300 series stainless steel,Spindle: Forged scm435 chromoly steel,Inner bearing: Bushing,Outer bearing: Cartridge,Traction pins: 8mm adjustable.
The ultimate pedal for enduro riding and racing is now available in a premium edition featuring titanium wings and dual-chamfered edges to minimize weight and maximize performance. The mallet E 11 is the lightest mallet ever — designed and engineered for the rider who wants the best of the best, and nothing less.Key Features:Titanium wings to reduce weight,Dual chamfered edges to reduce rock-strikes,Exclusive double-anodized black and gold colorway,Concave platform for secure foothold,6 adjustable pins per side for grip,Traction pad technology customizable interface ,Ribbed body for better traction when unclipped,52mm q-factor for maneuverability on tight trails,Hex alloy endcap for durability,4-sided entry / superior mud shedding,Customizable float & release angle,Premium bearings & double seal system.Specification:Forged scm 435 chromoly steel spindle,6061-T6 aluminum body,6al / 4v titanium wings,300 series stainless steel springs,15° / 20° release angle,52mm q-factor,igus LL-glide inner bearing,enduro cartridge outer bearing,premium brass cleats with shims included,6 adjustable pins per side,alloy endcaps,5 year warranty.