The crankbrothers candy is an iconic pedal designed by Carl and Frank, the original founders of crankbrothers, they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail, at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area.Key Features:Cleat: Premium brass cleats included,Shims: Included,Release Angle: 15° to 20°,Warranty: 2 years,Weight: 272g per pair,Spindle: Forged scm435 chromoly steel,Body: one piece composite,Wings: Stamped steel,Spring: 300 series stainless steel,Inner bearing: Bushing,Outer bearing: Cartridge,Maximum rider weight: No restrictions,Colours: Black, Blue, Red or Neon Green.As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
Key Features: Optimal surface area,Minimal profile 16mm thin,10 adjustable pins per side for grip,Premium bearings & seal system,Stamp small recommended for shoe sizes: 5-10 (US) // 37-43 (EU),Stamp large recommended for shoe sizes: 10-15 (US) // 43-49 (EU),.Specification: Adjustable Pins: 10 Per Side,Body Material: A380 Aluminium,Endcap: T15,Footprint: 100mm X 100mm,Inner Bearing Type: Igus Bearing,Max Rider Weight: No Restriction,Outer Bearing Type: Double Cartridge Bearing,Shoe Size: US 5-10 // EU 37-43,Spindle Material: Forged Scm 415 Chromoly Steel,Warranty: 5 Years,Weight: 439g Per Pair.
The crankbrothers candy is an iconic pedal designed by Carl and Frank, the original founders of crankbrothers, they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail, at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area.The trade up from level 1 pedals is the 2 piece machined aluminium pedal body and increased warranty to 5 years.Key Features:Cleat: Premium brass cleats included,Shims: Included,Release Angle: 15° to 20°,Warranty: 5 years,Weight: 324g per pair,Spindle: Forged scm435 chromoly steel,Body: 2 piece machined aluminium,Wings: Stamped steel,Spring: 300 series stainless steel,Inner bearing: Bushing,Outer bearing: Cartridge,Maximum rider weight: No restrictions,Colours: Orange/Silver or Silver,.You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). These shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal).As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
The ultimate pedal for enduro riding and racing is now available in a premium edition featuring titanium wings and dual-chamfered edges to minimize weight and maximize performance. The mallet E 11 is the lightest mallet ever — designed and engineered for the rider who wants the best of the best, and nothing less.Key Features:Titanium wings to reduce weight,Dual chamfered edges to reduce rock-strikes,Exclusive double-anodized black and gold colorway,Concave platform for secure foothold,6 adjustable pins per side for grip,Traction pad technology customizable interface ,Ribbed body for better traction when unclipped,52mm q-factor for maneuverability on tight trails,Hex alloy endcap for durability,4-sided entry / superior mud shedding,Customizable float & release angle,Premium bearings & double seal system.Specification:Forged scm 435 chromoly steel spindle,6061-T6 aluminum body,6al / 4v titanium wings,300 series stainless steel springs,15° / 20° release angle,52mm q-factor,igus LL-glide inner bearing,enduro cartridge outer bearing,premium brass cleats with shims included,6 adjustable pins per side,alloy endcaps,5 year warranty.
Traction pads replacement kit to refresh your pedals. Kit Includes: 8x 1mm traction pads,8x 2mm traction pads,.Compatible With: Candy 2/3 (2016 - present),Candy 7 & 11 (2016 - present),Mallet E (2016 - present).
Refresh your crankbrothers doubleshot 2 or 3 internal components to keep them running box fresh. Includes: Inner spindle seal x 2, Outer spindle seal x 2, Inner Igus solid bearing x 2, Outer Enduro cartridge bearing x 2, Spindle nut x 2, Outer bearing carrier x 2.
Mallet pedals feature a double sided open design allowing for quick and reliable engagement with minimal mud clogging. A two piece body keeps the weight down whilst providing a strong and durable platform.Key Features:Release angle: 15° to 20°,Cleat: Premium brass cleats included,Warranty: 5 years,Weight: 428g per pair,Platform: Two piece aluminium + composite,Wings: Stamped steel,Spring: 300 series stainless steel,Spindle: Forged scm435 chromoly steel,Inner bearing: Bushing,Outer bearing: Cartridge,Traction pins: 8mm adjustable.
Choose to ride flat or clipped in. The new double shot is crankbrothers hybrid pedal designed half flat / half clip-in.Moulded traction pins and diamond plate area provide grip and support. Key Features:Excellent mud-shedding: machined pedal body helps further prevent mud clogging.,Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these).,Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. ,Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal..
The crankbrothers candy is an iconic pedal designed by Carl and Frank, the original founders of crankbrothers, they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail, at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area.Key Features:Cleat: Premium brass cleats included,Shims: Included,Release Angle: 15° to 20°,Warranty: 5 years,Weight: 304g per pair,Spindle: Forged scm435 chromoly steel,Body: 2 piece machined aluminium,Wings: Cast Steel,Spring: 300 series stainless steel,Inner bearing: Needle,Outer bearing: Cartridge,Maximum rider weight: No restrictions,Colour options: Black/Silver, Blue/Silver or Red/Silver,.You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). These shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal).As with the rest of the crankbrothers range the pedals are fully serviceable with a level 3 / 11 service kit (product code CRB-11730). Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
The design for the original crankbrothers pedal began out of frustration. The founders of crankbrothers, Carl and Frank, were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The candy 7 pedal is a clipless pedal with a platform offering improved stability across a wide range of disciplines from all mountain / trail to cyclo-cross. The pedal body is 10% larger than the level 1, 2 and 3 pedal bodies. The chamfered edges help to minimise rock strikes.There is an ongoing debate amongst many riders about which is best, candy or eggbeater. The candy pedal provides an additional platform which is confidence inspiring and also gives some support or those moments when you’ve unclipped but are unsure if you need to get your foot down for a dab, jump off the bike or quickly get clipped in again and put the power down.Key Features:Excellent mud-shedding: the design is very open.,Ribbed body for extra traction when unclipped,4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.,Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike, while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling.,Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these).,Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.,Chamfered edges help reduce rock strikes,Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike.,Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. ,Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.,crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit (CRB-16051)..Specifications:Weight (per pair): 320g,Spindle: Forged scm 435 chromoly steel,Body: 6061-T6 aluminium,Wings: 17-4PH stainless,Spring: 300 series stainless steel,Inner bearing: Igus LL-glide bearing,Outer bearing: Enduro cartridge bearing,Cleats: Premium brass cleats included,Release angle: 15° or 20°,Warranty: 5 years.
The flat pedal from crankbrothers is engineered to provide the optimal interface between shoe and pedal.The 13mm external and 11mm internal thickness on the level 7 stamp provide a low profile concave pedal body that your feet sit into. Adjustable pins allow the rider to fine tune the feel.The outsole profiles of the top mountain bike show brands were analysed and the data used to create two distinct surface areas to optimise shoe/pedal contact across all of these different models. The small is designed for EU shoe sizes from 37-43, and 43-49 for large. Once the optimal sizes had been established the features required for the ideal flat pedal were also incorporated.Key Features:Concave pedal platform so that your shoe feels like it sits into the pedal and feels connected. 13mm external and 11mm internal thickness.,20 adjustable pins per pedal. 8mm in the centre of the pedal and 10mm on the outer edges.,Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails.,Small: 100mm x 100mm pedal body footprint,Large: 114mm x 111mm pedal body footprint,Available in red or black.Specification:Weight: 345g (Small), 375g (Large),Spindle: Forged scm 435 chromoly steel,Body: Forged 6061-T6,Inner bearing: Igus LL-glide bearing,Outer bearing: Igus LL-glide bearing,Body dimensions: 100mm x 100mm (Small), 114mm x 111m (Large),Pins: 10 adjustable pins per side,Warranty: 5 years.
Ultra-durable brass cleats for crankbrother pedals.Key Features:Premium strength brass,Release angle: 10 degrees,Bolt pattern: 2 bolt,Adjustment: 2.2mm left/right,Shims included.