Mark Webb was looking for a strong bar without flex, so he chose to go with straight gauge 4130 heat treated tubing for max strength to weight ratio. He has also livened up the angles to fine tune his signature bar. ###section### Product Specs Rise: Multiple Options Width: 29.25" Up Sweep: 2.5° Backsweep: 10.5° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: TBC ###section### ###shogun-image-section###
King Of Dirt bar from United, These bars feature a 8.7 rise and are made from 100% seamless 4130 butted chromoly tubing. ###section### Product Specs Rise: Multiple Options Width: 28" Up Sweep: 3 ° Backsweep: 11 ° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 861g / 1.9lbs ###section### ###shogun-image-section###
Full crmo, plain guage, post liquid heattreated. Rise: 9" ###section### Product Specs Rise: Multiple Options Width: 29.5" Up Sweep: 3 ° Backsweep: 11.5 ° Bar Clamping Diameter: 22.2mm Bar Type: 4pc Weight: 894g / 1.97lb ###section### ###shogun-image-section###
When Eclat came to designing its first four-piece handlebar, they really wanted to go back to the drawing board and address all the annoying issues that four piece bars have always notoriously suffered from. With larger diameter top bend for cleaner look and more resistance to bending, larger tubing at welds solves the common issue of 4pc bar fatigue by greatly increasing contact area at weld. Available in a 10" Rise. ###section### Product Specs Rise: Multiple Options Width: 30" Up Sweep: 2.5 ° Backsweep: 12 ° Bar Clamping Diameter: 22.2mm Bar Type: 4pc Weight: 1139g / 2.5lbs ###section### ###shogun-image-section###
Dillon Lloyd's Signature Bar. The Buck bar is one of the first bars in BMX to utilise the new 25.4mm clamping technology, allowing for a stronger, stiffer bar that a rider like Dillon can have full confidence in without having to worry about it slipping or breaking when things get rough. Using Wethepeople's time tested 4130 m2 heat-treated crmo tubing and Dillon's own geometry, if you're looking for a dependable set of bars to get buck with, you've found them. PLEASE NOTE: This handlebar must be used with a 25.4mm bore stem (check out Wethepeoples Hydra 25.4mm stem) and will not be compatible with a traditional 22.2mm stem. ###section### Product Specs Rise: Multiple Options Width: 29" Up Sweep: 1.5° Backsweep: 11° Bar Clamping Diameter: 25.4mm Bar Type: 2pc Weight: 925g/2.03lbs ###section### ###shogun-image-section###
Dennis Enarson's all new signature 2-pc Rig bar. Available in 2 sizes, 9 and 9.25. Bigger box and thicker tubing (1.8t) help make the Rig bar stronger and more reliable. Made from 13-butted 4130 heat-treated chromoly. ###section### Product Specs Rise: Multiple Options Width: 29" Up Sweep: 2 ° Backsweep: 12 ° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 941g / 2.07lbs ###section### ###shogun-image-section###
Value bmx handlebar from United are made from 11 butted tubing (The same as the Squad bars) But have not undergone the UV1 heat treating process so they are more affordable. Available in a 9" or 10" rise. ###section### Product Specs Rise: Multiple Options Width: 30" Up Sweep: 1 ° Backsweep: 12 ° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 1079g / 2.38lbs ###section### ###shogun-image-section###
The Strangler Bar utilises oversize 25.4mm tubing near the clamping area to make it outlast anything you can throw at it. The increased 25.4mm diameter tube where the stem clamps the bar allows the bar to be clamped much more securely than the traditional 22.2mm tubing found on most bars and stems. The Strangler bar combines the bigger 25.4mm clamping area with a matching 25.4mm griptube that then tapers back to a regular 22.2mm tube further up the bar. PLEASE NOTE: This handlebar must be used with a 25.4mm bore stem (check out Eclats Slattery 25.4mm stem) and will not be compatible with a traditional 22.2mm stem. Rise: 9.1" ###section### Product Specs Rise: Multiple Options Width: 29" Up Sweep: 2.5 ° Backsweep: 12 ° Bar Clamping Diameter: 25.4mm Bar Type: 4pc Weight: 1130g / 2.49lbs ###section### ###shogun-image-section###
New Team bars from Merritt are multi-butted heat-treated chromoly with dual radius bends and a 19mm crossbar. The bars feature a 9.75 rise, 29.25 Width, 12 degree backsweep and 2 degree upsweep. ###section### Product Specs Rise: Multiple Options Width: 29.5" Up Sweep: 2 ° Backsweep: 12 ° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 836g / 1.84lbs ###section### ###shogun-image-section###
The Fiend Team bars are made from multi butted post weld heat treated 4130 for maximum strength to weight ratio. Available in 8.5", 8.75" and 9". ###section### Product Specs Rise: Multiple Options Width: 28.5" Up Sweep: 1 ° Backsweep: 12 ° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 793g / 1.75lbs ###section### ###shogun-image-section###
The HQ bars are made from multiple butted and post liquid heat treated full cromoly. Rise: 9". ###section### Product Specs Rise: Multiple Options Width: 29.5" Up Sweep: 2 ° Backsweep: 11 ° Bar Clamping Diameter: 22.2mm Bar Type: 2pc Weight: 870g / 1.92lbs ###section### ###shogun-image-section###
Dakota Roche signature bars from Cult. 7/8 bar with a beefy but slick 1" OD clamping area for extra strength. Made from 100% heat treated butted chromoly. Only works with 1" stems. ###section### Product Specs Rise: 9.25" Width: 28" Up Sweep: 2° Backsweep: 11° Bar Clamping Diameter: 25.4mm Bar Type: 2pc Weight: TBC ###section### ###shogun-image-section###