Key Features:Ball End inserts into a screw at a 25° angle,World's strongest handle,Speed-Wrench feature,Tools open from both the top and bottom,Molded-in 90° stop,Patented spacers between tools.
Hand built by Malcolm Borg the BORG31 wheelset is a semi aero, very stiff wheelset based on a wide rim which is perfect for all weather training use, road racing or CX use.A robust all weather race orientated wheelset24mm wide and 31mm deep tubeless ready rims (also compatible with tubes)20 spoke front and 24 spoke rearMiche Primato hubs for reliabilityLife of the rim warrantyWeight (1655g (approx)The BORG31 has been built around a 24mm wide and 31mm deep Kinlin rim with an internal width of 19mm. The rear rim is offset (asymmetric) which increases non drive spoke tension, which is a useful way of increasing spoke life. The rims are tubeless ready and come with tubeless tape, valves and IRC tyre levers. The rims have been built with 20 black Sapim CX-ray spokes at the front and 24 black Sapim CX-force spokes at the rear with black alloy SILS (self locking nipples). The Cx-force spokes have a thicker elbow than most spokes (triple butted) this means longer spoke life.To ensure the best value, performance and durability the BORG22 wheels use Miche Primato hubs. The bearings are 2x6001 C3 in both the front and rear hub shells. The rear freehub has 2x 6901 bearings. The axles front and rear are 12mm diameter and made of steel. The front and rear hub are a free axle design making disassembly really simple. Both the front and rear hub have a bearing preload adjuster which should be set once the wheels are installed in the bike. Simply a reliable wheelset for all weathers and combined with the right tyre it could be the only wheelset you need.Whats included:Wheelset front and rear with Sapim CX- ray and CX-Force aero spokesTubeless rim tapeBlack alloy tubeless valvesQR skewers for Miche and Shimano hubsThe best guarantee (for the life of the rim against spoke failure and anything that could be termed a defect)
Hand built by Malcolm Borg the BORG22 wheelset is the perfect choice for high mileage riders who ride in all conditions no matter what the weather.24mm wide tubeless ready Kinlin rims (also compatible with tubes)Triple butted Sapim spokesBig cartridge bearing hubs that are easy to serviceLife of the rim warrantyShimano or Campagnolo freehubWeight: 1646g (approx)The BORG22 has been hand built around a 24mm wide and 22mm deep Kinlin rim that has an internal width of 19mm and a 2mm thick spoke nipple bed. The rims are tubeless ready and come with tubeless tape, valves and IRC tyre levers. The rims have been built with 24 black Sapim laser spokes at the front and 28 black Sapim force spokes at the rear. Sapim black self locking alloy nipples are used and Sapim HM nipple washers are also utilised.To ensure the best value, performance and durability the BORG22 wheels use Miche Primato hubs. The bearings are 2x6001 C3 in both the front and rear hub shells. The rear freehub has 2x 6901 bearings. The axles front and rear are 12mm diameter and made of steel. The front and rear hub are a free axle design making disassembly really simple. Both the front and rear hub have a bearing preload adjuster which should be set once the wheels are installed in the bike. Simply reliable wheels that benefit from life of the rim guarantee against going out of true/spoke failure, rim cracking (but not rim damage) and hub flange cracking. Please note the wheelset has a rider weight limit of 100kg.Whats included:Wheelset front and rear with Sapim spokes/nipples and Miche hubsTubeless rim tapeTubeless valvesQR SkewersThe best guarantee (for the life of the rim against spoke failure and anything that could be termed a defect)
The BORG 26 All Weather wheelset provides guaranteed reliability in all conditions. The wheels are built with high mileage riders in mind and therefore are suitable for all types of riders. Those that ride in the foulest of conditions and simply need dependable wheels will love these wheels from BORG. Dependable does not have to heavy though. The BORG 26 have every detail covered. A robust all-weather wheelset for rim brakesStiff yet comfortableTriple butted Sapim spokesShimano8/9/10/11 speed, SRAM AXS 12 speed or Campagnolo 9/10/11/12 speed freehub24mm wide tubeless tyre ready rims (tubed tyre compatible also)26mm deep rimsLife of the rim warrantyWeight from 1760g 32 spoke with Campagnolo hubsBlack hub, rim and spokesMiche Primato HubsThe wheels are hand built in the BORG shop. They are mainly used as an all-weather training wheelset. The rims are not expensive if they need to be replaced which is unlikely and the hubs, well they love the wet. Bearing life is long in all conditions. The rim is 24mm wide and 26mm deep. It weighs 475g. The rear rim has offset drilling for increased NDS spoke tension (this is a good thing for spoke life). The internal width of this rim is 19mm and it has a 2mm thick spoke nipple bed. All tyres will sit wider on this rim than they would on a narrower one. This improves rider comfort due to the increased air volume and due to the different tyre shape handling in the bends particularly over broken road surfaces is improved. These wheels are robust, and the rims are low cost meaning they are perfect training wheels and ideal for wet weather/winter use. They are supplied tubeless ready with tubeless tape and valves. Tubed tyres can of course be fitted and are an easy fit. Even Schwalbe Marathons fit with ease. Please note that the images are for illustration purposes only.
Box One linear brake cable kits are among the most advanced BMX brake cables on the market, starting with custom Concentric housing that includes aramid fiber-wrapped aluminum/steel linear wires for the best combination of strength and low weight. The inner Nano Cable wires are treated with a PTFE coating that reduces friction and boosts braking performance. Our anodized aluminum Kollars™ ferrules further reduce cable drag.
Box Two Threadless Headsets have an aluminum top cap, upper bearing cover, lower race and upper and lower cups. All-aluminum construction results in a lightweight yet durable headset. Each headset is fitted with super-smooth rolling, precision, angular-contact sealed bearings.
Box Two Quick Release Seat Clamps are cold forged and CNC machined from 6061-T6 aluminum alloy. Weighing in at just 27 grams/ 0.95 ounces in the 31.8 size, they are as lightweight as they are tough. The head of the quick release lever and the face of the clamp are given a proprietary low-friction surface treatment that ensures smooth lever action for the life of the clamp, without the need for a bushing. Meets or exceeds ENM standards.
Box Two integrated headsets feature an aluminum top cap, CNC-machined bearing cover, and split crown race with super-smooth rolling, precision bearings. The 1.5" headset is designed solely for tapered frames and forks but also includes an adapter which allows you to run a straight 1-1/8" inch fork in a tapered head tube. It has a 45° x 45° upper bearing and a 36°x45° lower bearing.
Box Two integrated headsets feature an aluminum top cap, CNC-machined bearing cover, and solid crown race with super-smooth rolling, angular contact bearings.
Box Two integrated Headsets feature an aluminum top cap, CNC-machined bearing cover, and split crown race with super smooth rolling, precision 45° x 45° bearings.
Box Two integrated headsets feature an aluminum top cap, CNC-machined bearing cover, and split crown race with super-smooth rolling, precision 45°x45° bearings. Please note: this particular headset is designed to allow the use of 1" forks with frames that have 1-1/8" integrated head tubes.
Box One Alloy Single Speed Cogs are CNC-machined from long-wearing 7075-T6 aluminum alloy and are designed to fit Shimano compatible cassette hubs and have a 5mm wide inner base, giving a more solid connection to the cassette body. The alloy cogs are anodized black with laser-etched graphics.