The profile of VALEGRO's polycarbonate shell has been tested and refined by KASK’s engineers in conjunction with a wind-tunnel to get the best results in terms of thermo-cooling performance. The VALEGRO offers advanced ventilation and an impressive weight of just 180g (size small). This new design offers maximum cooling through 37 ventilation holes with new breathable and quick-dry padding. The 5mm layer of fast-wicking thermoformed tri-dimensional padding is antistatic, bacteriostatic, heat regulating and moisture transferring using Resistex Carbon. Alongside this cutting edge technology, the chin pad with eco-leather strap contributes to a helmet that’s comfortable to wear, all day.
Alé PRS Bullet DWR Cycling JacketWith a windproof and water-resistant Windtex membrane, the Ale PRS Bullet DWR Cycling Jacket lets you cycle comfortably when the weather is inclement. A streamlined fit saves you energy too.Cold. Wet. Windy. Conditions that may put off some from heading out. But with the PRS Bullet DWR Cycling Jacket, you'll enjoy excellent protection when the weather is at its worst. Thanks to its combination of Windtex membrane and a DWR (Durable Water Resistant) surface finish, the jacket is completely impervious to wind and offers a high degree of water resistance,To the inside, a three-dimensional fabric works to trap body heat and also offers excellent breathability. This prevents the build-up of humidity and condensation on the inside, ensuring you're not left cold and damp when you're working hard on the bike. This jacket locks in warmth and delivers unrivalled comfort for when you're building up your winter mileage.Racing FitThe fit of the jersey is tailored to be close to the body and streamlined. The J-Stability System at the waist keeps the fit snug as you get low into the drops.FeaturesMaterials: 100% PolyesterWindproof and water-resistant (10,00mm) WindTex membraneBody MappingSemicircular fleece insert on the back collarZippered back pocketJ-Stability SystemAll logos are reflectiveVentilation openings at the frontRacing fitSuggested temperature range: -3 to 6 degrees CBuy Alé Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
The SAVE Carbon seatpost has been proven in the worlds most challenging bike races. Light comfortable and incredibly functional.Subtle HollowGram and SAVE glossy graphics on matte carbon finish. Ultra-light continuous carbon fiber layup offers just enough compliance to take the edge off without sacrificing power transfer.Easy adjust two bolt head for fine tuning ride position. Offset: 15mmWeight: 27.2mm x 400mm version weighs in at just 202 grams! Compatible with round and oval and both metal and carbon rails. Available sizes: 25.4mm x 350mm25.4mm x 400mm27.2mm x 350mm27.2mm x 400mm
Alé Women's PRS Bridge Cycling JacketMaking use of a host of technical wind and water-resistant textiles and with an inner zipped 'vest' for thermoregulation, the Alé Women's PRS Bridge Cycling Jacket offers comfort for the harshest of winter cycling conditions.With a windproof and waterproof eVent Exagon membrane and insulating inner zipped 'vest' panel, the Women's PRS Bridge Cycling Jacket is adept at dealing with ever-changing winter weather conditions and for the coldest of days on the bike. The jacket has a unique construction. Providing protection against cold and wet conditions is the eVent Exagon membrane. This is paired with an inner insulating Thermo Fleece 'vest' chest panel and areas of highly breathable fabrics where needed most. This combination allows for versatile weather protection and easy control of heat regulation.Unzipping the outer zipper allows you to increase cooling air circulation through the jacket, ideal when you're working hard to crest a hill climb or facing into a headwind. However, with the outer zip open and its separate inner thermal layer zipped up, you'll still keep a chill off your chest while still boosting ventilation.eVent DV Stretch technologyThis laminated water-repellent and windproof membrane give the Storm Combi Cycling Jacket its outstanding all-weather performance, blocking wind and keeping you dry during periods of light rain and sudden showers.Its high degree of breathability also prevents water vapour build-up on the inside when you're pedalling hard or conditions improve. The internal 'Wave' structure also draws sweat off the skin and effective air chambers regulate body temperature.Racing FitThe fit of the jacket is tailored to be close to the body and streamlined. This increases your cycling efficiency, saving precious energy for those last few kilometres of winter base rides.FeaturesMaterials: 86% Polyester, 14% ElastaneeVent Exagon DWR fabric - 10,000mm waterproof ratingSoft Shell Wave DWR + Thermo Fleece DWR for insulating warmth, breathability and water repellencyReflective details for visibilityRacing Fit - optimised for aerodynamics - for a regular fit we recommend going up a sizeSuggested temperature range: -5 to 10 degrees CBuy Alé Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Wolf Tooth Direct Mount Chainring for Cannondale Hollowgram CX and Road Offset is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly with Cannondale Hollowgram CX and Road Offset cranks, this direct mount chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Key Features:This direct mount chainring will replace your existing spider/chainring on Road and CX Cannondale Hollowgram SI & SISL cranks.,These are NOT compatible with Cannondale mountain bike cranksets because the chainline will be too far off from optimal.,For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle),Compatible with all 10-, 11-, and 12-speed chains except Shimano 12-speed chains.,If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).,Chainline 44mm.
With a windproof and waterproof eVent Exagon membrane and insulating inner zipped 'vest' panel, the Women's PRS Bridge Cycling Jacket is adept at dealing with ever-changing winter weather conditions and for the coldest of days on the bike. The jacket has a unique construction. Providing protection against cold and wet conditions is the eVent Exagon membrane. This is paired with an inner insulating Thermo Fleece 'vest' chest panel and areas of highly breathable fabrics where needed most. This combination allows for versatile weather protection and easy control of heat regulation. Unzipping the outer zipper allows you to increase cooling air circulation through the jacket, ideal when you're working hard to crest a hill climb or facing into a headwind. However, with the outer zip open and its separate inner thermal layer zipped up, you'll still keep a chill off your chest while still boosting ventilation. eVent DV Stretch Technology This laminated water-repellent and windproof membrane give the Storm Combi Cycling Jacket its outstanding all-weather performance, blocking wind and keeping you dry during periods of light rain and sudden showers. Its high degree of breathability also prevents water vapour build-up on the inside when you're pedalling hard or conditions improve. The internal 'Wave' structure also draws sweat off the skin and effective air chambers regulate body temperature. Racing Fit The fit of the jacket is tailored to be close to the body and streamlined. This increases your cycling efficiency, saving precious energy for those last few kilometres of winter base rides.
MET Rivale (MIPS) Road HelmetThe Rivale (MIPS) Road Helmet sets a new standard for aero performance, refined levels of comfort and fit, alongside the very best in cutting-edge head-protection technology. Safety FirstThe Rivale (MIPS) Road Helmet is first and foremost, focused on protecting your head should you be unfortunate to find yourself falling off your bike. The first line of defence is the combination of the shock-absorbing EPS (Expanded Polystyrene) inner paired with a tough and durable polycarbonate shell. These are moulded seamlessly together and provide a helmet you can trust should you crash, soaking up impact forces and maintaining the integrity of the helmet. . Safety is then further enhanced via the MIPS-C2® Brain Protection System.MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head.Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head.More Comfort. Improved Fit.This iteration of the Rivale has also seen an improvement to comfort levels. Getting just the right fit every time is made possible by the Safe-T Upsilon Fit System. A twist of the rear dial allows you to get the fit just how you like it. This works in tandem with the 360-degree Head belt, with vertical adjustment, to ensure no pressure points and perfect stability. Air Mesh comfort pads also ensure sweat is quickly wicked away and they're washable too, letting you keep everything fresh on every ride. Aero Efficiency OptimisedThe MET design team have honed the aero performance of the Rivale, making it better than ever, while still maintaining outstanding levels of ventilation. The NACA Vent built-in with a lower and tube-shaped profile makes the Rivale MIPS even more aerodynamic than its predecessor. The front vents are now longer and wider, enhancing airflow into the helmet. Once inside, airflow rushes along internal air channels to give a boost to your comfort and dispel sweat vapour. The front vents can also serve as sunglasses docks.Features:In-mould polycarbonate shell with EPS linerMIPS-C2® Brain Protection SystemSunglasses portsSafe-T Upsilon Fit System360-degree Head belt, Vertical adjustmentHand washable Air Mesh comfort padsAir Lite strapsAdjustable cam dividerReflective rear decals18 Vents - Internal Air ChannelingShop all MIPS helmets - Click hereBuy MET Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
MET Rivale (MIPS) Road HelmetThe Rivale (MIPS) Road Helmet sets a new standard for aero performance, refined levels of comfort and fit, alongside the very best in cutting-edge head-protection technology. Safety FirstThe Rivale (MIPS) Road Helmet is first and foremost, focused on protecting your head should you be unfortunate to find yourself falling off your bike. The first line of defence is the combination of the shock-absorbing EPS (Expanded Polystyrene) inner paired with a tough and durable polycarbonate shell. These are moulded seamlessly together and provide a helmet you can trust should you crash, soaking up impact forces and maintaining the integrity of the helmet. . Safety is then further enhanced via the MIPS-C2® Brain Protection System.MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head.Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head.More Comfort. Improved Fit.This iteration of the Rivale has also seen an improvement to comfort levels. Getting just the right fit every time is made possible by the Safe-T Upsilon Fit System. A twist of the rear dial allows you to get the fit just how you like it. This works in tandem with the 360-degree Head belt, with vertical adjustment, to ensure no pressure points and perfect stability. Air Mesh comfort pads also ensure sweat is quickly wicked away and they're washable too, letting you keep everything fresh on every ride. Aero Efficiency OptimisedThe MET design team have honed the aero performance of the Rivale, making it better than ever, while still maintaining outstanding levels of ventilation. The NACA Vent built-in with a lower and tube-shaped profile makes the Rivale MIPS even more aerodynamic than its predecessor. The front vents are now longer and wider, enhancing airflow into the helmet. Once inside, airflow rushes along internal air channels to give a boost to your comfort and dispel sweat vapour. The front vents can also serve as sunglasses docks.Features:In-mould polycarbonate shell with EPS linerMIPS-C2® Brain Protection SystemSunglasses portsSafe-T Upsilon Fit System360-degree Head belt, Vertical adjustmentHand washable Air Mesh comfort padsAir Lite strapsAdjustable cam dividerReflective rear decals18 Vents - Internal Air ChannelingShop all MIPS helmets - Click hereBuy MET Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
MET Rivale (MIPS) Road HelmetThe Rivale (MIPS) Road Helmet sets a new standard for aero performance, refined levels of comfort and fit, alongside the very best in cutting-edge head-protection technology. Safety FirstThe Rivale (MIPS) Road Helmet is first and foremost, focused on protecting your head should you be unfortunate to find yourself falling off your bike. The first line of defence is the combination of the shock-absorbing EPS (Expanded Polystyrene) inner paired with a tough and durable polycarbonate shell. These are moulded seamlessly together and provide a helmet you can trust should you crash, soaking up impact forces and maintaining the integrity of the helmet. . Safety is then further enhanced via the MIPS-C2® Brain Protection System.MIPS (Multi-directional Impact Protection System) The Mips system is designed to provide added safety for helmets in many accidents. For certain impacts, the Mips system can reduce harmful rotational motion that might otherwise be transferred to the user’s head.Rotational motion is a common cause of concussions in oblique hits to the head. In a crash, the Mips system is designed to move slightly inside the helmet to help redirect forces away from the head.More Comfort. Improved Fit.This iteration of the Rivale has also seen an improvement to comfort levels. Getting just the right fit every time is made possible by the Safe-T Upsilon Fit System. A twist of the rear dial allows you to get the fit just how you like it. This works in tandem with the 360-degree Head belt, with vertical adjustment, to ensure no pressure points and perfect stability. Air Mesh comfort pads also ensure sweat is quickly wicked away and they're washable too, letting you keep everything fresh on every ride. Aero Efficiency OptimisedThe MET design team have honed the aero performance of the Rivale, making it better than ever, while still maintaining outstanding levels of ventilation. The NACA Vent built-in with a lower and tube-shaped profile makes the Rivale MIPS even more aerodynamic than its predecessor. The front vents are now longer and wider, enhancing airflow into the helmet. Once inside, airflow rushes along internal air channels to give a boost to your comfort and dispel sweat vapour. The front vents can also serve as sunglasses docks.Features:In-mould polycarbonate shell with EPS linerMIPS-C2® Brain Protection SystemSunglasses portsSafe-T Upsilon Fit System360-degree Head belt, Vertical adjustmentHand washable Air Mesh comfort padsAir Lite strapsAdjustable cam dividerReflective rear decals18 Vents - Internal Air ChannelingShop all MIPS helmets - Click hereBuy MET Helmets from Chain Reaction Cycles, the World's Largest Online Bike Store.
Here is the eco-friendly PRR jacket! because cycling is passion but also respect for the environment. Made of low environmental impact materials. Suitable for med-winter temperatures. Breathability and elasticity are the most important features of this softshell jacket which, combined with its insulation and protection properties, reduce heat loss and preserve body temperature. Its stretchability allows the jacket to adapt to the body movements just like a second skin. According to the Body Mapping System, open areas in the back and underarm have been designed to thermoregulate the heat generated during the sport activity. The exclusive graphics fully embody the contemporary and technical Alè® look.
Lightweight Trail/Enduro wheel built using a light yet super wide Alex Volar tubeless ready rim, 110x15mm Boost sealed bearing hub and lightweight Mach1 double butted spokesOur new Tubeless ready Trail/Enduro wheels are designed to take anything you can throw at them, but at the same time, offer a low rotational weight.,Built using the Alex Volar 3.0 rim with its massive 30mm internal profile which offers increased air volume and unrivaled traction due to lower pressure possibilities,BOOST Chosen Trail hub Front 110 x 15mm axle, 2 sealed bearings, 32h.,Mach1 double butted black racing spokes. Strong yet light, stainless steel spoke with brass nipples.,29" wheel 1016g.
Lightweight Trail/Enduro wheel built using a light yet super wide Alex Volar tubeless ready rim, 110x15mm Boost sealed bearing hub and lightweight Mach1 double butted spokesOur new Tubeless ready Trail/Enduro wheels are designed to take anything you can throw at them, but at the same time, offer a low rotational weight.,Built using the Alex Volar 3.0 rim with its massive 30mm internal profile which offers increased air volume and unrivaled traction due to lower pressure possibilities,BOOST Chosen Trail hub Front 110 x 15mm axle, 2 sealed bearings, 32h.,Mach1 double butted black racing spokes. Strong yet light, stainless steel spoke with brass nipples.,27.5" wheel 971g / 29" wheel 1016g.