The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight.We have a long 1.614 inch (41 mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length. The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride. The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly.Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length.The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head, and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride.The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Very low profile clamps means no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight.We have a long 1.614 inch (41 mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length. The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride. The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly.Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length.The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head, and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride.The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Very low profile clamps means no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight.We have a long 1.614 inch (41 mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length. The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride. The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly.Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
The Masterpiece is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. Masterpiece posts weigh approximately 40g less than the same size Elite post. This weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson accomplishes this weight reduction by machining the seatpost all over, including the oval inner diameter. It is able to hold closer tolerances by machining than by extrusion alone. Machining over an already beautiful design makes the Masterpiece Seatpost a work of art.Machined 7000 series Aluminium41mm seat rail grip lengthTilt adjustment from -5° to +29°Low profile clampsAvailable in 27.2mm, 30.9mm and 31.6mm diametersCertified to: EN 14766 2006 MTBThe tube and head of the Thomson Masterpiece seatpost is integral machined from one piece of high strength 7000 series aluminium. The head is not pressed or bonded in, allowing for superior strength and minimum weight. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inches shorter than our grip length.The Thomson Masterpiece seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts we tested failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson Masterpiece seatpost has a clamp, head, and upper tube strong enough to withstand 325 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 230 foot-lbs of torque. Under severe impact the Thomson Masterpiece seatpost will bend slightly but allow the rider to come to a stop or continue the ride.The Masterpiece seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Very low profile clamps means no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards.
Aluminium drop bars bring the performance and dependability you have come to expect from Thomson. The lineup is available in 3 profiles and varying widths, each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.The road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without “locking out” your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement.The Dirt Drop is available in 44cm, and 46cm, with 25° flare, Drop 130mm, Reach 90mm ready for your next adventure, regardless of the road you choose.Key Features: Available in 44cm and 46cm widths., 130mm Drop., 90mm Reach., 31.8mm Clamp., 25 degree Flare., 7000 series Aluminium..
Aluminium drop bars bring the performance and dependability you have come to expect from Thomson. The lineup is available in 3 profiles and varying widths. Each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.Our road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without “locking out” your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement.The round profile is available in 38mm, 40cm, 42cm, and 44cm, Drop 147mm, Reach 72mm.Key Features: Available in 38cm, 40cm, 42cm, and 44cm widths., 147mm Drop., 72mm Reach., 31.8mm Clamp., Made from 7000 series Aluminium., Wing section small enough not to restrict hand movements..
Our aluminium drop bars bring the performance and dependability you have come to expect from Thomson. The lineup is available in 3 profiles and varying widths. Each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.Our road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without “locking out” your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement.The mild flat profile is available in 40cm, 42cm, and 44cm, Drop 148mm, Reach 89mm.Key Features: Available in 40cm, 42cm, and 44cm widths., 148mm Drop., 89mm Reach., 31.8mm Clamp., Made from 7000 series Aluminium., Wing section small enough not to restrict hand movements..
Thomson s aluminium drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths. Each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.Available in 38cm, 40cm, 42cm, and 44cm widths148mm Drop89mm Reach31.8mm ClampMade from 7000 series AluminiumWing section small enough not to restrict hand movementsThomson s road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement. The mild flat profile is available in 40cm, 42cm, and 44cm, Drop 148mm, Reach 89mm.
Aluminium drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths. Each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.Available in 38cm, 40cm, 42cm, and 44cm widths147mm Drop72mm Reach31.8mm ClampMade from 7000 series AluminiumWing section small enough not to restrict hand movementsThomson s road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement. The round profile is available in 38mm, 40cm, 42cm, and 44cm, Drop 147mm, Reach 72mm.
Aluminium drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths. Each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.Available in 38cm, 40cm, 42cm, and 44cm widths147mm Drop72mm Reach31.8mm ClampMade from 7000 series AluminiumWing section small enough not to restrict hand movementsThomson s road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement. The round profile is available in 38mm, 40cm, 42cm, and 44cm, Drop 147mm, Reach 72mm.
The Dirt Drop Handlebars are Aluminium drop bars that bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths, each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.Available in 44cm and 46cm widths130mm Drop90mm Reach31.8mm Clamp25 degree Flare7000 series AluminiumThe road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement. The Dirt Drop is available in 44cm, and 46cm, with 25° flare, Drop 130mm, Reach 90mm ready for your next adventure, regardless of the road you choose.
Aluminium drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths. Each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.Available in 38cm, 40cm, 42cm, and 44cm widths147mm Drop72mm Reach31.8mm ClampMade from 7000 series AluminiumWing section small enough not to restrict hand movementsThomson s road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement. The round profile is available in 38mm, 40cm, 42cm, and 44cm, Drop 147mm, Reach 72mm.
The Dirt Drop Handlebars are Aluminium drop bars that bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths, each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.Available in 44cm and 46cm widths130mm Drop90mm Reach31.8mm Clamp25 degree Flare7000 series AluminiumThe road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement. The Dirt Drop is available in 44cm, and 46cm, with 25° flare, Drop 130mm, Reach 90mm ready for your next adventure, regardless of the road you choose.
Aluminium drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths. Each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.Available in 38cm, 40cm, 42cm, and 44cm widths147mm Drop72mm Reach31.8mm ClampMade from 7000 series AluminiumWing section small enough not to restrict hand movementsThomson s road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement. The round profile is available in 38mm, 40cm, 42cm, and 44cm, Drop 147mm, Reach 72mm.
Thomson s aluminium drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths. Each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.Available in 38cm, 40cm, 42cm, and 44cm widths148mm Drop89mm Reach31.8mm ClampMade from 7000 series AluminiumWing section small enough not to restrict hand movementsThomson s road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement. The mild flat profile is available in 40cm, 42cm, and 44cm, Drop 148mm, Reach 89mm.
Thomson s aluminium drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths. Each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.Available in 38cm, 40cm, 42cm, and 44cm widths148mm Drop89mm Reach31.8mm ClampMade from 7000 series AluminiumWing section small enough not to restrict hand movementsThomson s road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement. The mild flat profile is available in 40cm, 42cm, and 44cm, Drop 148mm, Reach 89mm.
Thomson s aluminium drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths. Each made from 7000 series aluminium. Borrowing from the proven carbon profiles, the alloy drop bars are available with a mild flat, a round profile, or new to Thomson, the Flared Drop bar.Available in 38cm, 40cm, 42cm, and 44cm widths148mm Drop89mm Reach31.8mm ClampMade from 7000 series AluminiumWing section small enough not to restrict hand movementsThomson s road bar wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement. The mild flat profile is available in 40cm, 42cm, and 44cm, Drop 148mm, Reach 89mm.
Since 1994, Thomson has produced patented bike components, specializing in seatposts, stems, and collars, and shipping over 120,000 parts a year to more than 30 countries. Masterpiece: The Premium. It combines incredibly light weight with the characteristic strength and function of a Thomson. Masterpiece seatposts weigh approximately 40 grams less than an Elite seatpost of the same size, while maintaining high strength and durability. Key Features: The Masterpiece is Thomson's ultimate seatpost. The weight reduction is accomplished while maintaining the strength and durability expected of a Thomson seatpost. Thomson are able to hold closer tolerances by machining than by extrusion alone. Machining all over an already beautiful design makes the Masterpiece Seatpost a work of art. The tube and head of the Thomson Masterpiece seatpost is integral-machined from one single piece of high strength 7000 series aluminium. Thomson accomplishes this weight reduction by machining the seatpost all over; including the oval inner diameter. Every component of the Masterpiece seatpost is 100 percent American made. This includes all fasteners and forgings. Each product is 100 percent inspected Saddle rails from 7 x 7mm up to 7 x 10mm work well with Thomson Masterpiece clamps. Weight limit: 200 pounds (91 Kilos). Colour: Black. Setback: Inline. Weight: 190g 31.6 x 350mm Inline (PBK office scales).