By eliminating unwanted chain movement, X-HORIZON™ shifts faster, reducing shift effort and chain slap. Eact Actuation™ for fast and accurate shifts using SRAM’s 1:1® actuation ratio (shifter cable travel : derailleur movement) X-Sync™ pulley features a 12-tooth design that helps control the chain’s lateral movement Roller Bearing Clutch™ controls chain tension for consistent shifting X-Horizon™ straight parallelogram design limits all movement to the horizontal axis, which makes ghost shifting impossible while also reducing shift force Cage Lock™ technology makes for fast wheel changes or chain installation
SRAM Rival 1 11 Speed Rear DerailleurThe SRAM Rival 1 Rear Mech delivers incredibly smooth, quiet and reliable shifting even in the most demanding conditions. It takes the proven technologies of SRAM's 1x mountain bike derailleur design and applies them to provide exceptional off-road performance for cyclocross use.Quiet and Smooth Shifting PerformanceThe internal clutch design eliminates chain slack, making it almost impossible for the chain to fall of the chainring whilst cycling; a real benefit when riding on rough terrain. It also creates a noticeably smoother, quieter and higher performing drivetrain configuration for your bike.Features: Cage Material: Aluminium Pulley Bearings: Steel sealed cartridge bearings Pulley Wheel Size: 12T Speed: 11-Speed Cable Pull Ratio: Exact Actuation Maximum Sprocket Size: Medium Cage: 36T; Long Cage: 42T Weight: Medium Cage: 432g; Long Cage: 438gTechnologies: Cage Lock: Wheel removal and installation, as well as chain installation, becomes faster and simpler. Just push the cage forward to create slack and lock it into place. X-Sync: The X-Sync pulley features a 12-tooth design that helps control the chain’s lateral movement Roller Bearing Clutch: Maximum drivetrain stability even through the most punishing terrain. With Roller Bearing Clutch technology, derailleur bounce and chain slap are eliminated without sacrificing precision. Exact Actuation: Simplified and stabilised shifting over tight cog spacing found on modern cassettes. By using exact cable tension, the end result is the easiest index shifting system to set up and it stays that way. X-Horizon: The ‘straight parallelogram’ design limits all movement to the horizontal axis, which makes ghost shifting impossible while also reducing shift force. For quicker, more exact shifting, the large upper pulley offset design maintains a constant chain gap across all gears.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Rival 1 11 Speed Rear DerailleurThe SRAM Rival 1 Rear Mech delivers incredibly smooth, quiet and reliable shifting even in the most demanding conditions. It takes the proven technologies of SRAM's 1x mountain bike derailleur design and applies them to provide exceptional off-road performance for cyclocross use.Quiet and Smooth Shifting PerformanceThe internal clutch design eliminates chain slack, making it almost impossible for the chain to fall of the chainring whilst cycling; a real benefit when riding on rough terrain. It also creates a noticeably smoother, quieter and higher performing drivetrain configuration for your bike.Features: Cage Material: Aluminium Pulley Bearings: Steel sealed cartridge bearings Pulley Wheel Size: 12T Speed: 11-Speed Cable Pull Ratio: Exact Actuation Maximum Sprocket Size: Medium Cage: 36T; Long Cage: 42T Weight: Medium Cage: 432g; Long Cage: 438gTechnologies: Cage Lock: Wheel removal and installation, as well as chain installation, becomes faster and simpler. Just push the cage forward to create slack and lock it into place. X-Sync: The X-Sync pulley features a 12-tooth design that helps control the chain’s lateral movement Roller Bearing Clutch: Maximum drivetrain stability even through the most punishing terrain. With Roller Bearing Clutch technology, derailleur bounce and chain slap are eliminated without sacrificing precision. Exact Actuation: Simplified and stabilised shifting over tight cog spacing found on modern cassettes. By using exact cable tension, the end result is the easiest index shifting system to set up and it stays that way. X-Horizon: The ‘straight parallelogram’ design limits all movement to the horizontal axis, which makes ghost shifting impossible while also reducing shift force. For quicker, more exact shifting, the large upper pulley offset design maintains a constant chain gap across all gears.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Guide RE Disc Brake No ClampDesigned for the increased speeds, torque and power that's produced by electric bike (E-bike) motors, this hydraulic disc brake is ready for day-long adventures on your electric mountain bike (E-MTB). It features a hard-wearing aluminium lever blade construction, which makes it tough and dependable as you tackle demanding terrain conditions. SRAM has also equipped this model with a four-piston caliper for powerful and consistent braking performance, wherever your next takes you.E-MTB Hydraulic Disc BrakeGuide RE is SRAM's optimised braking solution for today's exciting category of E-MTBs, capable of handling the higher average speeds, more intense use and increased mass due to the presence of the motor and battery. It combines SRAM's proven Guide R lever assembly with a powerful four-piston caliper derived from the gravity-focused Code brakes. Guide RE provides real, usable on-trail control-optimal power and modulation mean speed can be controlled in all terrain and in all situations, both uphill and downhill.DirectLinkSRAM's DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake. It offers a no-nonsense solution to give you precise control.Piggyback ReservoirThe brake fluid reservoir on SRAM's latest lever design is optimized for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement—so you can switch your levers on the handlebar and run them moto without hassle.Reach AdjustBrake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone.Timing Port ClosureA hydraulic brake's timing port is the connection between the reservoir and the lever cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurises the system. SRAM's timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency.Features: Lever Blade Material: Aluminium - stamped Use: Electric Mountain Bike (E-MTB) Brake Type: Hydraulic disc brake Bracket (Disc Brake): Direct Mount DIR Caliper: Four-piston caliper Pads: Sintered pads Rec MMX Clamp: Not Included Rotor/Clamp Included: No, available separately MatchMaker X compatible, Ambidextrous lever mount, Tool-free reach adjust Single or Pair: Single Weight: 415gManufacturer's Part Number: 00.5019.964.210Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Sram Rival 1 Rear Derailleur Long Cage 11-Speed (For 10-42) T3
Fit for modern times. The updated SRAM Force® brakeset pairs mechanical rim braking with our wireless Force eTap AXS™ group. The dual pivot design also accounts for wider road tires without compromising braking power. Features: Dual pivot design increases braking power and enhances progressive feel Wider clearance for modern tires and wheelsets (up to 28c) Updated finish to match SRAM Force eTap AXS™ Includes SwissStop pads: Platinum Flash Pro pad (carbon rims) or BHP pad (aluminum rims) Specifications: Brake type: Mechanical Pad type: Cartridge Nut length (Rim brake): 10mm, 16mm Reach (RB): Standard Noodle bend (degrees): n/a Stance: n/a Compat - Cable pull: Cantilever/Road Boss spacer (mm): n/a Color (RB): Grey Orientation: Front, Rear Hose length (mm): n/a Hardware Stainless: Steel
The new SRAM GX 1x11 rear derailleur features all of the same technology as the more expensive X1 models with the only difference being the aluminium construction which results in a slightly heavier weight and a more wallet friendly price tag! This SRAM Rear Derailleur is crafted from lightweight, stiff and durable aluminium, resulting in a feather-light weight with bombproof durability. Kitted out with X-Horizon and Roller Bearing Clutch technology, this derailleur produces super-fast exact shifting at all times. This derailleur excels in muddy conditions with mud-shedding capabilities provided by the 12-tooth X-Sync pulley wheels to keep you riding smooth even when the ground isn t.
This versatile 12 speed cassette features a high-quality nickel-chrome plating, which gives it fantastic durability as well as quiet operation on your road or gravel bike. Its main highlight is its X-Range gearing that achieves a wider range and higher jumps, so riders can benefit from smoother and more consistent shifting wherever their ride takes them. 12 Speed Cassette with X-Range Gearing Due to today's drop bar bikes being faster and more capable than ever before, riders want a shifting set-up with wide-range gearing to match their wide range of cycling pursuits. But, as the range is only half of the equation, they also want a drivetrain that offers the right gear for any situation. With more range, tighter jumps, and smoother shifts, this 12 speed cassette makes it easier to get the performance you want from your drivetrain. SRAM is taking X-Range to another level. Its premier gearing technology, which utilises tight jumps between chainrings and a wide range, 10-tooth start cassette, is now available for Rival. This includes cassettes that feature smooth, precise shifting in ranges that cover road, gravel, and everything in between. - X-Range gearing gives you more range and a smoother gear progression, so you’re always in the right gear - Nickel chrome plating for quiet and durability - Full Pin construction for durability and light weight - Designed to work with an XDR driver body
The SRAM Aero SL-500 shift levers deliver high performance at a lower price. The shifting blades are made of lightweight alloy and have an optimized ergonomic shape for comfort and natural handling. Rear shifting is indexed for fast and precise gear changes, while the front shifter is designed for YAW™ chainrings.Specifications for SL-500 Aero Shifter Set 10spWeight : 154g,Speeds : 10,Compatibility : SRAM RED, SRAM Force, SRAM Rival, SRAM Apex,Recommended Group : SRAM Rival,Material : Aluminum Shifter Blade.
SRAM XG 1250 12 Speed CassetteCombining renowned gearing technology with a tough construction, this 12 speed cassette offers dependable performance for road and gravel riding disciplines. It features a high-quality nickel-chrome plating, which gives it fantastic durability as well as quiet operation on your travels. Benefitting from X-Range gearing, it also achieves a wider range and higher jumps, so riders can enjoy smoother and more consistent shifting wherever their ride takes them. 12 Speed Cassette with X-Range GearingDue to today's drop bar bikes being faster and more capable than ever before, riders want a shifting set-up with wide-range gearing to match their wide range of cycling pursuits. But, as the range is only half of the equation, they also want a drivetrain that offers the right gear for any situation. With more range, tighter jumps, and smoother shifts, this 12 speed cassette makes it easier to get the performance you want from your drivetrain.SRAM is taking X-Range to another level. Its premier gearing technology, which utilises tight jumps between chainrings and a wide range, 10-tooth start cassette, is now available for Rival. This includes cassettes that feature smooth, precise shifting in ranges that cover road, gravel, and everything in between.- X-Range gearing gives you more range and a smoother gear progression, so you're always in the right gear- Nickel chrome plating for quiet and durability- Full Pin construction for durability and light weight- Designed to work with an XDR driver bodyFeatures: Finish: Nickel Chrome plating Use: Road, Gravel Speed: 12 speed Driver Body Compatibility: SRAM XDR Gearing: 10-30T Option: (10,11,12,13,14,15,17,19,21,24,27,30); 10-36T Option: (10,11,12,13,15,17,19,21,24,28,32,36)Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM XG 1250 12 Speed CassetteCombining renowned gearing technology with a tough construction, this 12 speed cassette offers dependable performance for road and gravel riding disciplines. It features a high-quality nickel-chrome plating, which gives it fantastic durability as well as quiet operation on your travels. Benefitting from X-Range gearing, it also achieves a wider range and higher jumps, so riders can enjoy smoother and more consistent shifting wherever their ride takes them. 12 Speed Cassette with X-Range GearingDue to today's drop bar bikes being faster and more capable than ever before, riders want a shifting set-up with wide-range gearing to match their wide range of cycling pursuits. But, as the range is only half of the equation, they also want a drivetrain that offers the right gear for any situation. With more range, tighter jumps, and smoother shifts, this 12 speed cassette makes it easier to get the performance you want from your drivetrain.SRAM is taking X-Range to another level. Its premier gearing technology, which utilises tight jumps between chainrings and a wide range, 10-tooth start cassette, is now available for Rival. This includes cassettes that feature smooth, precise shifting in ranges that cover road, gravel, and everything in between.- X-Range gearing gives you more range and a smoother gear progression, so you're always in the right gear- Nickel chrome plating for quiet and durability- Full Pin construction for durability and light weight- Designed to work with an XDR driver bodyFeatures: Finish: Nickel Chrome plating Use: Road, Gravel Speed: 12 speed Driver Body Compatibility: SRAM XDR Gearing: 10-30T Option: (10,11,12,13,14,15,17,19,21,24,27,30); 10-36T Option: (10,11,12,13,15,17,19,21,24,28,32,36)Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Adopting all the technologies that give the fastest, quietest shifting available, the new SRAM Force 22 Rear Derailleur has been designed with our Exact Actuation™ technology for precise, efficient shifting throughout the extended gear range. We have given and even refining tooth geometry of the jockey wheel. The result is that the chain that runs smoother and quieter than ever before. With all the additional technologies we’ve managed to keep the weight the same, at well under 200 grams. Exact Actuation™ shifting gives fast, accurate shifts., More clearance with 28t cassettes thanks to a longer B-knuckle., New silent shifting with optimized Aeroglide Pulleys™., New spring-fixed barrel adjuster., New chain pulley cage adds precise chain management., WiFLi™ option.
SRAM Rival 10 Speed Gear Shift LeverDesigned using the finest of SRAM's DoubleTap® technology, the Rival 10 Speed Gear Shift Lever boasts an exceptional output that'll put you ahead of the rest. This component benefits from one lever for shifting and a separate lever for controlled braking. Alternative cable routing options allow for both brake and shifter cables to run along either side of the handlebar for optimum rider comfort. SRAM Rival also incorporates the popular reach adjust feature, which SRAM invented and allows riders to customise their brake and shift levers. Now every rider has a choice on positioning their DoubleTap® levers.Features: Use: Road, Time Trial, Touring, Cyclocross Material: Carbon Fibre brake lever, Aluminium shift lever Brake Levers/Gear Shifters: SRAM Rival Speed: 10-Speed Cable Pull Ratio: Exact actuation Weight: 320gTechnologies: DoubleTap® shifting - this makes changing gears easier and faster, eliminating the cumbersome and awkward engagement associated with two-lever systems. DoubleTap handles up and downshifts in one short, sweeping motion, with minimal effort and maximum comfort no matter where you are on the bars. With short, rapid taps the transport pawl moves the ratchet wheel and up through the shifting range. Downshifting comes via a longer sweep of the lever (in the same inward direction you upshift, but to an ergonomically maximised 15° angle) with the holding pawl and the transport pawl leapfrogging each other quickly and smoothly. Exact Actuation™: When SRAM launched their road technology from scratch, they reapplied their mountain bike (MTB) proven SRAM 1:1 actuation ratio (shifter cable travel: derailleur movement) for 10 speed rear shifting. EA helps to simplify/stabilise the uneasy act of balancing rear derailleur hanger design, tight cog spacing and exact cable tension. The result: the easiest index shifting system to set up and it stays that way ZeroLoss™: Simply means, well, zero loss—when you push on the lever, for an upshift or down shift, the cable is engaged instantly—zero loss of movement. There is no middle ground where you're waiting for the shift to come. Gear changes are instant and preciseBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Built around Sram’s DoubleTap technology, Sram Rival controls offer a performance advantage that other competition level shifters can’t touch. With Zero Loss shifting front gears are engaged immediately. And, like Sram Red, Sram Rival has its front trim position on the big ring. Added cable routing options allows for both brake and shifter cables to run along either side of the handlebar. Sram Rival also incorporates the popular reach adjust feature, which Sram invented, and allows riders to customize their brake and shift levers. Now every rider has a choice on positioning their DoubleTap levers.Proprietary DoubleTap technology delivers smooth up- and downshifts in one motion.Ergonomic design is comfortable, aerodynamic, and hides all cables, while weighing only 320g.Carbon shift lever is light, strong, and comfortable..Weight320g.Speeds10 rear.Technology Highlight(s)DoubleTap with ZeroLoss on the front.MaterialCarbon Brake Lever, Aluminum Shift Lever.
Fit for modern times. The updated SRAM Force® brakeset pairs mechanical rim braking with our wireless Force eTap AXS™ group. The dual pivot design also accounts for wider road tires without compromising braking power. Features: Dual pivot design increases braking power and enhances progressive feel Wider clearance for modern tires and wheelsets (up to 28c) Updated finish to match SRAM Force eTap AXS™ Includes SwissStop pads: Platinum Flash Pro pad (carbon rims) or BHP pad (aluminum rims) Specifications: Brake type: Mechanical Pad type: Cartridge Nut length (Rim brake): 10mm, 16mm Reach (RB): Standard Noodle bend (degrees): n/a Stance: n/a Compat - Cable pull: Cantilever/Road Boss spacer (mm): n/a Color (RB): Grey Orientation: Front, Rear Hose length (mm): n/a Hardware Stainless: Steel
Maximum aero-efficiency doesn't have to mean minimum comfort. The SRAM 900 Aero Brake Lever's ultra-thin, full-carbon-fiber form is shaped to slice through the air while also allowing for excellent hand fit. The addition of a return spring puts it in a class of its own.
SRAM G2 R Disc BrakeFeaturing a robust cast aluminium lever body and a forged aluminium caliper, this mountain bike (MTB) hydraulic disc brake is capable of handling all the intensity that's associated with all-day epics in the mountains. SRAM has also equipped this version with tool-free reach adjustment, so you can easily tweak the distance between the lever and your handlebar for a more rider-tuned braking feel. Another highlight is its powerful organic brake pads that deliver an exceptional feel and bite as you weave between the trails at speed.The core of brake performance is consistency. Reliability. Trust. And with G2 R, SRAM focused on offering a premium value without compromising the heart of the operation. This brake gives riders the G2s famed “Mini-Code” power and a whole suite of SRAM standard features at an absolutely unbeatable value.Power organic pads give riders both feel and bite.Engineered for easy installation and maintenance.Tools-free reach adjust for quick personalisation.Features: Lever Blade Material: Aluminium Finish Material: Stamped with Anodised Caliper Body Material: Aluminium Piston Material: Phenolic Plastic Pad Type: Steel-backed Organic Use: Mountain Bike (MTB) Brake Type: Hydraulic disc brake Mount: Direct mount DIR Number of Pistons: 4 Caliper Construction: Two-piece Hydraulic Fluid: DOT 4 Recommended Rotor Type: 1-piece CenterLine (available separately) Single or Pair: Single Please Note: Rotor/Bracket sold separatelyTechnologies: DirectLink: SRAM's DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake. It offers a no-nonsense solution to give you precise control. Power Reserve Geometry: Your fingers pull in a straight line, but brake levers move in an arc. Bottom line: Your fingers typically want to slip off the ends of the levers as you pull. We designed all of our brakes with the industry's lowest X Factor (that's the distance from the center of the handlebar to the center of the lever's pivot). That reduces the lever's inward travel, creating an arc that's closer to your fingers' natural motion and more power is delivered to the brake lever. And, the cool part is, every SRAM and Avid brake lever has it. Reach Adjust: Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone. S4 Lightweight 4-Piston Caliper: The all new S4 Caliper features four Machined and Moly-coated aluminum pistons for consistent rollback and easy set-up, Heat shield insulation and Bleeding Edge porting and adapter technology for easy bleeds. Timing Port Closure: A hydraulic brake's timing port is the connection between the reservoir and the lever cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM's timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency.Manufacturer's Part Number: 00.5018.177.001 Black Diffusion Rear LH 2000mm 00.5018.177.000 Black Diffusion Front RH 950mmBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM G2 R Disc BrakeFeaturing a robust cast aluminium lever body and a forged aluminium caliper, this mountain bike (MTB) hydraulic disc brake is capable of handling all the intensity that's associated with all-day epics in the mountains. SRAM has also equipped this version with tool-free reach adjustment, so you can easily tweak the distance between the lever and your handlebar for a more rider-tuned braking feel. Another highlight is its powerful organic brake pads that deliver an exceptional feel and bite as you weave between the trails at speed.The core of brake performance is consistency. Reliability. Trust. And with G2 R, SRAM focused on offering a premium value without compromising the heart of the operation. This brake gives riders the G2s famed “Mini-Code” power and a whole suite of SRAM standard features at an absolutely unbeatable value.Power organic pads give riders both feel and bite.Engineered for easy installation and maintenance.Tools-free reach adjust for quick personalisation.Features: Lever Blade Material: Aluminium Finish Material: Stamped with Anodised Caliper Body Material: Aluminium Piston Material: Phenolic Plastic Pad Type: Steel-backed Organic Use: Mountain Bike (MTB) Brake Type: Hydraulic disc brake Mount: Direct mount DIR Number of Pistons: 4 Caliper Construction: Two-piece Hydraulic Fluid: DOT 4 Recommended Rotor Type: 1-piece CenterLine (available separately) Single or Pair: Single Please Note: Rotor/Bracket sold separatelyTechnologies: DirectLink: SRAM's DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake. It offers a no-nonsense solution to give you precise control. Power Reserve Geometry: Your fingers pull in a straight line, but brake levers move in an arc. Bottom line: Your fingers typically want to slip off the ends of the levers as you pull. We designed all of our brakes with the industry's lowest X Factor (that's the distance from the center of the handlebar to the center of the lever's pivot). That reduces the lever's inward travel, creating an arc that's closer to your fingers' natural motion and more power is delivered to the brake lever. And, the cool part is, every SRAM and Avid brake lever has it. Reach Adjust: Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone. S4 Lightweight 4-Piston Caliper: The all new S4 Caliper features four Machined and Moly-coated aluminum pistons for consistent rollback and easy set-up, Heat shield insulation and Bleeding Edge porting and adapter technology for easy bleeds. Timing Port Closure: A hydraulic brake's timing port is the connection between the reservoir and the lever cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM's timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency.Manufacturer's Part Number: 00.5018.177.001 Black Diffusion Rear LH 2000mm 00.5018.177.000 Black Diffusion Front RH 950mmBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This MTB hydraulic disc brake features a robust cast aluminium lever body and a forged aluminium caliper, which makes it capable of handling all the intensity that's associated with all-day epics in the mountains. SRAM has also equipped this version with tool-free reach adjustment, so you can easily tweak the distance between the lever and your handlebar for a more rider-tuned braking feel. Another highlight is its powerful organic brake pads that deliver an exceptional feel and bite as you weave between the trails at speed. The core of brake performance is consistency. Reliability. Trust. And with G2 R, SRAM focused on offering a premium value without compromising the heart of the operation. This brake gives riders the G2s famed “Mini-Code” power and a whole suite of SRAM standard features at an absolutely unbeatable value. - Power organic pads give riders both feel and bite. - Engineered for easy installation and maintenance. - Tools-free reach adjust for quick personalisation. Technologies: DirectLink: SRAM’s DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake. It offers a no-nonsense solution to give you precise control. Power Reserve Geometry: Your fingers pull in a straight line, but brake levers move in an arc. Bottom line: Your fingers typically want to slip off the ends of the levers as you pull. We designed all of our brakes with the industry's lowest X Factor (that's the distance from the center of the handlebar to the center of the lever's pivot). That reduces the lever's inward travel, creating an arc that's closer to your fingers' natural motion and more power is delivered to the brake lever. And, the cool part is, every SRAM and Avid brake lever has it. Reach Adjust: Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone. S4 Lightweight 4-Piston Caliper: The all new S4 Caliper features four Machined and Moly-coated aluminum pistons for consistent rollback and easy set-up, Heat shield insulation and Bleeding Edge porting and adapter technology for easy bleeds. Timing Port Closure: A hydraulic brake’s timing port is the connection between the reservoir and the lever cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. Manufacturer's Part Number: 00.5018.177.001 Black Diffusion Rear LH 2000mm 00.5018.177.000 Black Diffusion Front RH 950mm
SRAM MTH 746 on WTB ST i25 TCS Rear WheelThis rear wheel combines a WTB ST i25 TCS rim with a SRAM MTH 746 hub for fast and smooth-rolling performance, whether you're racing or exploring. Specifically engineered for the rigours of cross country (XC) and gravel adventure riding.WTB ST i25 TCS RimBenefitting from a rock-solid aluminium alloy construction, this model's rim is tough and durable, making it more than capable of handling all the demands associated with gravel and cross country riding disciplines. WTB has also kitted out this version with a 25mm inner rim width for fast, stable and smooth-rolling performance across mixed terrain conditions.TCS 2.0 TechnologyBuilt upon WTB's proven Tubeless Compatible System, TCS 2.0 introduces a more robust, easily installed, and dependable tubeless system. A recessed channel along the centre of TCS 2.0 rims allows installation of the all-new Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tyre and rim. Once the Solid Strip is installed, TCS Tape is then applied to provide the airtight seal needed for a reliable tubeless system.SRAM MTH 746 HubComing equipped with a strong aluminium hub shell with machined flanges, this rear hub offers an excellent low weight without compromising durability. Designed for use with 12x148mm Boost spaced axle standards, this model ensures maximum stiffness, responsiveness and rotative performance when tackling rough gravel roads, forest paths and light trails.Features: Rim Material: Aluminium Alloy Axle Size: 12x148mm, Boost Use: Cross Country (XC), Gravel Inner Rim Width: 25mm Rim Type: WTB ST i25 Hub Type: SRAM MTH 746 Brake Type: Disc brake only Tubeless Ready: Yes, TCS 2.0 Recommended Tyre Section Width: 35-70mm Type: Clincher Spoke Count: 32 Single or Pair: Single rear wheelBuy SRAM Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.