SRAM Rival 22 WiFli Rear Derailleur Medium CageRival 22 features SRAM's WiFli technology for faster gear shifts and a wider gear range to help you overcome any challenge on the hilliest road rides.WiFli™= Wider- faster - lighter. SRAM's WiFli technology is based on the compact double chainring and 11 gears at the rear. It delivers a wider range of gears than your standard triple setup, faster shifts through the double rings, and every gear on the rear cassette with the added bonus of significant weight savings.Exact Actuation EA helps to simplify and stabilise the uneasy act of balancing derailleur hanger design, tight cog spacing, and exact cable tension. The result: the easiest indexing system to set up - and it stays that way too.Aeroglide Pulleys An all-new pulley design with sound damping offers a super efficient and silent ride experience. Specifications Cage: Medium, WiFliSpeed: 11sMax Tooth: 32Weight: 191g
SRAM's new HS2 Rotors are mountain bike specific and designed to improve braking performance, with 7% more power than their Centreline rotors while also reducing noise and heat dissipation.Thicker 2.00mm rotor for improved power and heat managementRecessed spokes with thermal dissipating paint reduce heat build upNew brake track pattern provides 7% more power and reduces noiseRotor Bolts includedThe HS2 is designed to bring next level braking performance, with the latest technology and design to bring you to a stop quicker and do it for longer. The HS2 is not only thicker than a regular rotor at 2.00mm but it also features a redesigned brake track that improves power by 7% compared to SRAM's Centreline Rotors. The larger surface area is also teamed with recessed spokes coated with thermal dissipating paint to dramatically reduce heat build up; even the longest, steepest descents won't trouble the heat management properties of the HS2. If you want a great value way to get some power and capability from your brakes, check out the SRAM HS2 Rotors!
The SRAM Level Hydraulic Disk Brake levels the playing field with power and reliability stuffed into a lightweight package. This is a no-nonsense performer, but don t let its understated disposition fool you Level gives you the art of braking in minimalist form.Stamped aluminium lever construction2-piston caliper designSteel-backed organic padStainless steel hardwareDOT 5.1 fluidTooled reach adjustmentPiggy back reservoirDirectlink / expandable bladder / timing port closure technologiesHose lengths: Front 950mm / Rear - 1800mmRotor / bracket sold separatelyApprox. Weight: 430g (direct mount, 800mm Hose, 160mm CL Rotor)
The SRAM Level Hydraulic Disk Brake levels the playing field with power and reliability stuffed into a lightweight package. This is a no-nonsense performer, but don t let its understated disposition fool you Level gives you the art of braking in minimalist form.Stamped aluminium lever construction2-piston caliper designSteel-backed organic padStainless steel hardwareDOT 5.1 fluidTooled reach adjustmentPiggy back reservoirDirectlink / expandable bladder / timing port closure technologiesHose lengths: Front 950mm / Rear - 1800mmRotor / bracket sold separatelyApprox. Weight: 430g (direct mount, 800mm Hose, 160mm CL Rotor)
With high-quality technology at its heart, this superb component creates the ultimate in stiffness, reliability and performance without sacrificing weight. Featuring SRAM's renowned DUB system, this model reaps the benefits of lightweight bearings and a robust oversized crank spindle. Thanks to its new standard for drivetrain performance, easy adjustability and reliability, you can enjoy the highest levels of performance, without the need to spend hours in your workshop or garage making adjustments.
◌SRAM DUB Road Pressfit Bottom BracketThis pressfit version of the DUB bottom bracket has been completely redesigned to be smoother, simpler and stronger than before. Featuring SRAM's renowned DUB system, this model reaps the benefits of lightweight bearings and a robust oversized crank spindle.Precise Bottom Bracket, Spindle and Bearing EngagementWith high-quality technology at its heart, this superb component creates the ultimate in stiffness, reliability and performance without sacrificing weight. Thanks to its new standard for drivetrain performance, easy adjustability and reliability, you can enjoy the highest levels of performance, without the need to spend hours in your workshop or garage making adjustments.Features: Material: Aluminium Compatible Frame Standard: Black 79mm: PF30 (79-83mm or BBRight); Black 73mm: PF30 (73mm); Black 83mm: PF30 (83mm) Compatible Crankset Standard: SRAM DUB ISO 4210 compliant One oversized spindle to work across every bottom bracket standard Greater bearing durability Easy installation Press Fit cups for lighter weight Integrated adjuster Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
◌SRAM DUB Road Pressfit Bottom BracketThis pressfit version of the DUB bottom bracket has been completely redesigned to be smoother, simpler and stronger than before. Featuring SRAM's renowned DUB system, this model reaps the benefits of lightweight bearings and a robust oversized crank spindle.Precise Bottom Bracket, Spindle and Bearing EngagementWith high-quality technology at its heart, this superb component creates the ultimate in stiffness, reliability and performance without sacrificing weight. Thanks to its new standard for drivetrain performance, easy adjustability and reliability, you can enjoy the highest levels of performance, without the need to spend hours in your workshop or garage making adjustments.Features: Material: Aluminium Compatible Frame Standard: Black 79mm: PF30 (79-83mm or BBRight); Black 73mm: PF30 (73mm); Black 83mm: PF30 (83mm) Compatible Crankset Standard: SRAM DUB ISO 4210 compliant One oversized spindle to work across every bottom bracket standard Greater bearing durability Easy installation Press Fit cups for lighter weight Integrated adjuster Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
◌SRAM DUB Road Pressfit Bottom BracketThis pressfit version of the DUB bottom bracket has been completely redesigned to be smoother, simpler and stronger than before. Featuring SRAM's renowned DUB system, this model reaps the benefits of lightweight bearings and a robust oversized crank spindle.Precise Bottom Bracket, Spindle and Bearing EngagementWith high-quality technology at its heart, this superb component creates the ultimate in stiffness, reliability and performance without sacrificing weight. Thanks to its new standard for drivetrain performance, easy adjustability and reliability, you can enjoy the highest levels of performance, without the need to spend hours in your workshop or garage making adjustments.Features: Material: Aluminium Compatible Frame Standard: Black 79mm: PF30 (79-83mm or BBRight); Black 73mm: PF30 (73mm); Black 83mm: PF30 (83mm) Compatible Crankset Standard: SRAM DUB ISO 4210 compliant One oversized spindle to work across every bottom bracket standard Greater bearing durability Easy installation Press Fit cups for lighter weight Integrated adjuster Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Monoblock Hydraulic Line KitAvailable in a number of compatible options to suit SRAM hydraulic disc brakes, this hydraulic line kit is ideal for refreshing your braking setup or completing your next bike build. Excellent for rebuilds, this kit is designed to make installation quick and easy.eTap Compatible OptionRoad riders are going beyond where we've ever gone before. We're going further and faster. And when the road stops, we keep going. One thing hasn't changed: We want to push those boundaries without any distractions. Exploring new limits has never been easier. eTap AXS—Simply Beyond.Features: Type: Hydraulic line kit Use: Mountain Bike (MTB), Road Hose Length: 2000mm Compatibility: Multiple options available to selectManufacturer's Part Numbers: DBS6168170 Black Level/Code DBS6168180 Black Red/eTapBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
If you're a rider whose performance needs or riding style dictates that you run a 9 speed drivetrain, the PG 970 is your only choice for light weight, strength, and precise shifting.Technology: PowerGlide II.Gear Ratios: 11-34, 11-32.Speeds: 9.Weight: 410 g (11-34) / 330 g (11-32).Material : Steel.
Speeds: 2x10, 3x10, 3x9Compatibility: Sram Exact Actuation Rear DerailleursSram Double (2x) and Triple Front DerailleursTechnology: Exact Actuation(10speed),1:1 Actuation (9 speed)Impulse TechnologyMatchMaker CompatibleMaterial: Aluminum Composite.
The new SRAM DUB™ bottom bracket series has a simple job—connect your crankarms and protect the smooth, long-lasting application of power to your drivetrain. To allow that singular focus, we’ve engineered the DUB™ spindle to be the one true unifying component. One oversized spindle to work across every bottom bracket standard. For better crankarm compatibility. For better protection from the elements. For longer-lasting performance. To be stronger, smoother, simpler. Now, back to the ride.Specifications for DUB™ Bottom BracketsMaterial: Aluminum, Steel (PressFit)Weight: 76g (BSA), 71g (PF92), 82g (BB30), 89g (PF30)Compatibility: DUB™ bottom brackets fit all frame shell standardsThe relationship between bottom bracket spindle and bearing is the core of DUB™ technology. It’s where stiffness meets durability. We took it a step beyond conventional thinking and made everything simpler — and better integrating the relationship between chainring, crank, spindle and bottom bracket. It’s this clear system approach that equals better drivetrain performance.
The new Rival brake lever, with Reach Adjust, features the same ErgoFit ergonomic design introduced on SRAM RED but delivered in a sleek, forged aluminium offer.
Designed to keep you in control over even the most challenging terrain, the SRAM Level T disc brake has a super-tough construction. This consists of stamped alloy levers and stainless steel hardware. The lever is also reach-adjustable so you can set it up to your exact preferences. Also, if you run a SRAM drivetrain, it's MatchMaker™ compatible for combing with compatible gear shifters to help you tidy up your bike’s cockpit. This is a complete disc brake with lever, hose and caliper - it comes fully assembled, pre-bled and ready for use. Technologies: Direct Link: SRAM's DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake. It offers a no-nonsense solution to give you precise control. DOT 5.1: Heat is an enemy of any brake system, so advancements in heat management mean advancements in your ride. SRAM found that in their systems DOT 5.1 takes almost three times longer to boil than DOT 4, thus allowing flawless, fade-free performance in even more extreme conditions. Expandable Bladder: SRAM's new brake lever design includes a reshaped bladder that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it's needed. The result is improved backpressure relief, which produces dependable braking power and consistency. MatchMaker and MMX Compatible: Save weight and clutter on the bar with Matchmaker. It holds Avid levers, SRAM® triggers, and various RockShox® controls, all with one tidy, light, clamp--a dream come true for handlebar component footprint conservationists the world over. PiggyBack™ Reservoir: The brake fluid reservoir on SRAM's latest lever design is optimised for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement. Timing Port Closure: A hydraulic brake's timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurises the system. SRAM's new timing port closure system features durable seals and an ultra-smooth cylinder bore finish, producing dependable braking power and consistency.
Level TLM puts proven SRAM braking performance and consistency at your fingertips, in a sleek, lightweight design optimized specifically for cross-country and light trail use. Power and modulation are delivered via the Level TLM’s alloy lever blade, DirectLink™ actuation, DOT 5.1 fluid and SRAM's new two-piston, monoblock caliper. The design provides superior heat management for consistent, fade-free performance all day long, and BLEEDING EDGE™ technology makes maintenance incredibly simple, so your brakes feel great all day — every day. Please Note: A handlebar clamp is not included with this item. Please Also Note: These levers are can be used as a left hand or a right hand brake as they have an ambidextrous design and a bleed port on both sides. Caliper Design: Incorporates technologies developed on Guide Ultimate’s S4 caliper Moly-coated aluminum pistons for consistent rollback and easy set-up New seals, gland geometry and piston coating for improved rollback, results in easier setup and improved consistency Heat Management: piston insulators and Heat Shield reduce operating temperature and minimize heat transfer to the caliper body Bleeding Edge: new bleeding adapter and porting for quick, mess-free bleeding Two 21mm pistons Monoblock construction. Bleeding Edge Technology: New bleed porting and fluid path make it easier to push fluid through the caliper for quick and easy bleeding. Dedicated bleed adapter for the Level Ultimate/TLM and S4 calipers (Guide Ultimate) plugs into the bleed port and seals the system to minimize air contamination and fluid loss. Timing Port Closure A hydraulic brake’s timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s new timing port closure system, features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. Contact Point Adjust Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It’s a quick and easy way to customize the feel of your brakes without having to move the pads. It’s also a way to balance both brake levers to feel exactly the same. Piggyback Reservoir The brake fluid reservoir on SRAM’s latest lever design is optimized for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement—so you can switch your levers on the handlebar and run them moto without hassle. Direct Link SRAM’s DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake It offers a no-nonsense solution to give you precise control. Reach Adjust Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone. Dead Band This refers to the time between the moment you engage the lever and when the pads contact the rotor. SRAM technologies such as SwingLink balance the dual demands of minimizing deadband and optimizing modulation for braking finesse and control. Expandable Bladder SRAM’s new brake lever design includes a reshaped bladder, that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it’s needed. The result is improved back-pressure relief, which produces dependable braking power and consistency.
Level TLM puts proven SRAM braking performance and consistency at your fingertips, in a sleek, lightweight design optimized specifically for cross-country and light trail use. Power and modulation are delivered via the Level TLM’s alloy lever blade, DirectLink actuation, DOT 5.1 fluid and SRAM's Level two-piston, monoblock caliper. The design provides superior heat management for consistent, fade-free performance all day long, and Bleeding Edge technology makes maintenance incredibly simple, so your brakes feel great all day - every day. Lightweight and Durable Caliper Design Incorporates technologies developed on Guide Ultimate’s S4 caliper Moly-coated aluminium pistons for consistent rollback and easy set-up New seals, gland geometry and piston coating for improved rollback, results in easier setup and improved consistency Heat Management: piston insulators and Heat Shield reduce operating temperature and minimize heat transfer to the caliper body Bleeding Edge: new bleeding adapter and porting for quick, mess-free bleeding Two 21mm pistons Monoblock construction. Bleeding Edge Braking Efficiency New bleed porting and fluid path make it easier to push fluid through the caliper for quick and easy bleeding. A dedicated bleed adapter for the Level Ultimate/TLM and S4 calipers (Guide Ultimate) plugs into the bleed port and seals the system to minimize air contamination and fluid loss. Timing Port Closure A hydraulic brake’s timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s new timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. Contact Point Adjust Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It’s a quick and easy way to customize the feel of your brakes without having to move the pads. It’s also a way to balance both brake levers to feel exactly the same. Piggyback Reservoir The brake fluid reservoir on SRAM’s latest lever design is optimized for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement—so you can switch your levers on the handlebar and run them moto without hassle. Direct Link SRAM’s DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake It offers a no-nonsense solution to give you precise control. Reach Adjust Brake Lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone. Dead Band This refers to the time between the moment you engage the lever and when the pads contact the rotor. SRAM technologies such as SwingLink balance the dual demands of minimizing deadband and optimizing modulation for braking finesse and control. Expandable Bladder SRAM’s Level brake lever design includes a reshaped bladder, that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it’s needed. The result is improved back-pressure relief, which produces dependable braking power and consistency.
Guide RE is SRAM's optimised braking solution for today's exciting category of E-MTBs, capable of handling the higher average speeds, more intense use and increased mass due to the presence of the motor and battery. It combines SRAM's proven Guide R lever assembly with a powerful 4-piston caliper derived from the gravity-focused Code brakes. Guide RE provides real, usable on-trail control-optimal power and modulation mean speed can be controlled in all terrain and in all situations, both uphill and downhill. Please Note: The lever on this brake will need to be connected to the brake hose. The hose and caliper are assembled together and pre-bled. Please Also Note: The lever does not come with a handlebar clamp as it is designed to be combined with your gear shifter mount) Reach Adjust Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone. MatchMaker and MMX Compatible Save weight and clutter on the bar with Matchmaker. It holds Avid levers, SRAM® triggers, and various RockShox® controls, all with one tidy, light, clamp-a dream come true for handlebar component footprint conservationists the world over. Available in two versions: Matchmaker™ X integrates the RockShox®XLoc and is compatible with XX and X0 brakes. Standard Matchmaker™is also available and works with any split-clamp design and RockShox® PushLoc. DirectLink SRAM’s DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake. It offers a no-nonsense solution to give you precise control. PiggyBack Reservoir The brake fluid reservoir on SRAM’s latest lever design is optimised for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement-so you can switch your levers on the handlebar and run them moto style without hassle. TPC Plus (Timing Port Closure) A hydraulic brake’s timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port to pressurise the system. SRAM’s new timing port closure system, called TPC Plus, features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. DOT 5.1 Heat is an enemy of any brake system, so advancements in heat management mean advancements in your ride. SRAM found that DOT 5.1 takes almost three times longer to boil than DOT 4, thus allowing flawless, fade-free performance in even more extreme conditions. Additional Item Top Features: Special Features: Contact Point Adjust, Piggyback Reservoir, MatchMaker X compatible Technology Highlights: TPC Plus, DirectLink, DOT 5.1 Pad/Holder: Top-loading System: Open System Tri-Align Caliper Positioning System: No Tool-Free Pad Replacement: Yes Stainless Hardware: Yes
SRAM Level T Disc BrakeTo ensure this budget-friendly Level T brake gives you the power to tame the trails, SRAM enhanced it with the same World Mountain Bike Championship-winning technologies as seen on its higher-spec Ultimate and Level TLM models. This means you can have a hydraulic disc brake that’s ready for the toughest cross country and all-mountain trails but at a more affordable price point.Features:Lever Material: Stamped AluminiumFinish: Gloss BlackHardware Material: Stainless SteelBrake Type: Hydraulic disc brakeCaliper Design: 2-piston caliperCaliper Mount Type: Post MountPad: Steel-backed organicBrake Fluid Type: DOT 5.1Adjustment: Tooled reach adjustPad/Holder: Top loadingIntended Use: XC, TrailSystem: Open systemBend Zone™: YesAmbidextrous Lever: YesSame proven lever technologies as Guide model - piston, seals, reservoir and bladderCompact lever body with DirectLink™ technologySame power as Level Ultimate, Level TLM and Level TLMatchMaker™ compatible to combine with compatible shifters (connecting mounts sold separately)Two-bolt clampSold IndividuallyManufacturer Reference Codes: Front: 00.5018.105.000; Rear: 00.5018.105.001Weight: 410gTechnologies:Direct Link: SRAM's DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake. It offers a no-nonsense solution to give you precise control.DOT 5.1: Heat is an enemy of any brake system, so advancements in heat management mean advancements in your ride. SRAM found that in their systems DOT 5.1 takes almost three times longer to boil than DOT 4, thus allowing flawless, fade-free performance in even more extreme conditions.Expandable Bladder: SRAM's new brake lever design includes a reshaped bladder that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it's needed. The result is improved backpressure relief, which produces dependable braking power and consistency.MatchMaker and MMX Compatible: Save weight and clutter on the bar with Matchmaker. It holds Avid levers, SRAM® triggers, and various RockShox® controls, all with one tidy, light, clamp--a dream come true for handlebar component footprint conservationists the world over.PiggyBack™ Reservoir: The brake fluid reservoir on SRAM's latest lever design is optimised for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement.Timing Port Closure: A hydraulic brake's timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurises the system. SRAM's new timing port closure system features durable seals and an ultra-smooth cylinder bore finish, producing dependable braking power and consistency.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Level TLM Disc BrakeIt has a championship-winning pedigree, and is ready to take all of the punishment you want to give it. Level TLM puts proven SRAM braking performance and consistency at your fingertips, in a sleek, lightweight design optimised specifically for cross-country and light trail use.Power and modulation are delivered via the Level TLM's alloy lever blade, DirectLink actuation, DOT 5.1 fluid and SRAM's new two-piston, monoblock caliper. The design provides superior heat management for consistent, fade-free performance all day long, and Bleeding Edge technology makes maintenance incredibly simple, so your brakes feel great all day, every day.Please Note: A handlebar clamp is not included with this item.Please Also Note: These levers are can be used as a left hand or a right hand brake as they have an ambidextrous design and a bleed port on both sides.Features: Lever Material: Forged aluminium Caliper Design: Monoblock 2-piston caliper Caliper Style: Post Mount Finish: Dark Grey Pad: Steel-backed organic Fluid: DOT 5.1 Adjustment: Tooled reach adjust Material: Aluminium Pad/Holder: Top loading Intended Use: XC, Trail System: Open system Bend Zone: Yes Ambidextrous: Yes Hardware: Stainless Steel Please Note: A handlebar clamp is not included with this item Weight: 356gTechnologies: Bleeding Edge: New bleed porting and fluid path make it easier to push fluid through the caliper for quick and easy bleeding, dedicated bleed adapter for the S4 caliper plugs into the bleed port and seals the system to minimise air contamination and fluid loss. Direct Link: SRAM's DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake. It offers a no-nonsense solution to give you precise control. DOT 5.1: Heat is an enemy of any brake system, so advancements in heat management mean advancements in your ride. SRAM found that in their systems DOT 5.1 takes almost three times longer to boil than DOT 4, thus allowing flawless, fade-free performance in even more extreme conditions. Expandable Bladder: SRAM's new brake lever design includes a reshaped bladder that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it's needed. The result is improved backpressure relief, which produces dependable braking power and consistency. Heat Shield: The stainless steel heat shields break the thermal connection between the pad and caliper body, reducing caliper fluid temperature by about 20C even in the most extreme testing conditions. MatchMaker and MMX Compatible: Save weight and clutter on the bar with Matchmaker. It holds Avid levers, SRAM triggers, and various RockShox controls, all with one tidy, light, clamp--a dream come true for handlebar component footprint conservationists the world over. PiggyBack Reservoir: The brake fluid reservoir on SRAM's latest lever design is optimised for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement. Timing Port Closure: A hydraulic brake's timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurises the system. SRAM's new timing port closure system features durable seals and an ultra-smooth cylinder bore finish, producing dependable braking power and consistency.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.