As a front lever for your Rival 1 set-up, or paired for single speed adventures, the new Rival brake lever features the same ErgoFit ergonomic design introduced on SRAM Red but delivered in a sleek, forged aluminium.Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone.NB: Compatible with cable brakes - not compatible with hydraulic brakes
Optimised for use with SRAM's latest road groupset, this SRAM Centreline X Steel rotor features a two-piece setup for enhanced rigidity and durability under the most extreme braking pressures and heat. Impressively low-weighted, it guarantees a reliable and sturdy performance when scrubbing and stopping from high speeds.
SRAM MTH 716 on WTB ST i35 TCS TC Front WheelThis high-quality mountain bike (MTB) front wheel combines a WTB ST i35 rim with a SRAM MTH 716 hub for a fantastic balance of strength, durability and performance as you charge from trail to trail.WTB ST i35 RimBoasting a hard-wearing aluminium alloy rim, this front wheel is engineered to handle all of the demands associated with all-day epics on your favourite trails. Thanks to its 35mm inner rim width, it provides smooth and stable rolling performance as you tackle the more demanding of terrain conditions.TCS 2.0 TechnologyBuilt upon WTB's proven Tubeless Compatible System, TCS 2.0 introduces a more robust, easily installed, and dependable tubeless system. A recessed channel along the centre of TCS 2.0 rims allows installation of the all-new Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tyre and rim. Once the Solid Strip is installed, TCS Tape is then applied to provide the airtight seal needed for a reliable tubeless system.SRAM MTH 716 HubComing equipped with a strong aluminium hubshell with machined flanges, this front hub offers an excellent low weight without compromising durability. Designed for use with 15x110mm Boost spaced axle standards, this model ensures maximum stiffness, responsiveness and rotative performance when tackling rough and tumble trails.Features: Rim Material: Aluminium Alloy Axle Size: 15x110mm, Boost Use: Mountain Bike (MTB) Wheel Size: 27.5" ETRTO: 35-584 Inner Rim Width: 35mm Rim Type: WTB ST i35 Hub Type: SRAM MTH 716 Brake Rotor Compatibility: Disc brake only Tubeless Ready: Yes, TCS 2.0 Recommended Tyre Section Width: 47-72mm Spoke Count: 32 End Caps: Torque Caps Single or Pair: Single front wheelManufacturer's Part Number: 46-19364 Black 27.5" Front 15x110mmBuy SRAM Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Centreline X Road 2 Piece SS Disc RotorCreated by SRAM to get the best possible performance from your road bike’s SRAM disc brakes, the Centreline X Road model is lightweight and runs smoothly and quietly. Featuring rounded edges to make it UCI-compliant and an alloy central section to draw heat away from the stainless-steel braking surface, you’ll enjoy fade-free braking power on long descents. The rounded edges also help to speed up wheel changes should you encounter a puncture on your ride.Features: Bolt Material: Braking Surface: Stainless Steel; Central Floating Section: Alloy Mount Type: Standard 6-bolt Brake Compatibility: Compatible with both road and mountain bike SRAM brakes Rotor Type: 2-Piece Lightweight, two-piece design Rounded edges are UCI-compliant and allow for easier wheel installs Sold Individually Includes Steel rotor mounting bolts Manufacturer's Part Number: RT-CLN-X-A2 Weight: 140mm: 128g; 160mm: 154gBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM Force CX1 X-Sync Narrow Wide ChainringGenuine SRAM replacement narrow wide chainring for SRAM CX1 X-Synx cranks. Whether you are looking to up your gearing or just want an easier ride the X-Synx narrow wide chainring is a machined alloy ring built with precision for optimum performance.This is a single-ring, 11-speed complete drivetrain that is lighter, simpler, and tougher while offering a clean look and optimal gear selection for cyclocross. SRAM Force CX1 offers better chain management and smooth shifting no matter the conditions or terrain. It is the only true 1x dedicated cyclocross system.Features:SRAM X-SYNC 1X chainrings provide the highest level of performance and durabilitySRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control, crucial in ‘crossThe sharp and narrow tooth profile as well as rounded chamfer edges help manage a deflected chainMud-clearing recesses for the inner chain links and rollersDesigned by SRAM in Germany, X-SYNC rings are an integral part of the SRAM 1X drivetrainCX1 X-SYNC chainrings are compatible with Quarq brand power metersWeight: 75g (42T)Specifications:Weight: 68g (38T)/ 73g (40T)/ 75g (42T)/ 85g (44T)/ 98g(46T)Material: Machined & Lathed ChainringFinish: Grey AnodizedSize/BCD: 38T-40T-42T-44T-46T/ 110BCDRecommended Group: SRAM Force CX1Technologies:X-SYNC™: - SRAM X-SYNC™ 1X chainrings provide the highest level of performance and durability. The SRAM X-SYNC™ tall square teeth edges engage the chain earlier than traditional triangle shaped teeth. The sharp and narrow tooth profile, as well as rounded chamfer edges, help manage a deflected chain. To provide the best possible performance in muddy conditions, the X-SYNC™ chainrings have been designed with mud-clearing recesses for the inner chain links and rollers. Engineered in Germany, X-SYNC™ rings are an integral part of the SRAM 1X™ drivetrain
SRAM CHAIN PC X01 EAGLE HOLLOWPIN 126 LINKS POWERLOCK 12 SPEED It might look normal from the outside but the engineering inside this incredible new chain design that makes possible a gear range previously found only in 2-chainring drivetrains. And it’s also the biggest contributor to the Eagle™ drivetrain’s ultra-smooth precise durable and quiet performance. The Eagle™ chain’s links have a smooth radius with no sharp edges or chamfers which yield a significant reduction in noise friction and wear on chainrings and cassette cogs. This design also allows for a flatter plate which means more consistent chain riveting and greater overall strength. HARD CHROME™ technology extends the chain’s optimal performance life and a Titanium Nitride coating on the Gold and Black models decreases corrosion and further reduces friction.
SRAM RED eTap Battery is e power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs Up to 1000 kilometers of riding per charge One Battery for either the front or rear derailleur
SRAM PressFit GXP Bottom BracketEnabling you to use SRAM or Truvativ GXP chainsets frames with pressfit bottom bracket shells, this bottom bracket reduces drag to make the most of your pedalling effort. The smooth operation is due to the fully sealed steel cartridge bearings, which has a tungsten finish to increase durability.Reasons to Buy: Reduces drag. Allows you to make the most out of your pedalling effort. Smooth operation. Fully sealed Steel cartridge bearings.Features: Type: PressFit (BB86 or BB92) Suits BB Shell Size: 41x86mm or 41x92mm Bearing Type: Sealed Cartridge Bearings Steel bearings with Tungsten finish Compatible with SRAM and Truvativ GXP chainsets only Weight: 89g (BB92)Manufacturer Reference Codes: 92mm - MTB: 00.6415.033.020; 86mm - Road: 00.6415.033.000Technologies: GXP: Other systems rely on side-loaded bearings to eliminate play, causing bearing wear. GXP captures the left-side bearing between the spindle and the left crankarm and allows the drive-side bearing to float axially on the spindle. There's no need to side-load bearings during adjustment. No excess wear and much simpler installation. Just tighten to the proper specifications and you're ready to roll, worry-free. GXP's two bicycle-specific cartridge bearings and eight seals ensure a smooth, long-lasting ride. SRAM's Gutter seal system takes a two-stage approach in directing contaminates away from the bearings providing longer bearing life. GXP’s Gutter Seal design also reduces friction, 35% less drag than previous versions, improving rider feel and performance. Gutter seal system has deeper installation tool grooves which provide stability and support while applying torque to the adapter cups. SRAM'S design and material choice have dropped 15g out.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
A groundbreaking design introduced last year, now Yaw technology comes to the SRAM Force 22 front derailleur. It uses a modified parallelogram to actually rotate the derailleur cage as you shift. This gives more clearance for the chain in each respective chainring, so eliminating chain rub in any gear combination without the need for trim on the front shifter. The slim spring design gives more clearance for the frame, minimising any interference issues and the integrated (but removable) chain spotter removes any chance of chain damage to your frame. At only 79g (10.2g for the chain spotter), the Force 22 front derailleur is one big difference that doesn't add much.he front derailleur cage rotates to maintain a consistent angular relationship with the chain. Yaw technology eliminates the need for shifter trim. As a result, shifts feel more direct, more precise, and combined with the new Red crankset and chainrings, delivers an unmatched performance advantage in front shifting.
SRAM Disc Brake Hydraulic Hose Kit SRAM Road Black 2000mm (includes caliper banjo & fittings) - Flat Mount Calipers (Special Order)
A genuine RockShox replacement DH Maxle, this 20mm tooled type removes the risk of a lever becoming damaged and making front wheel removal difficult.
SRAM Maxle DH - FrontRockShox Maxle DH - Front Designed for the downhill crowd, this tooled version of the RockShox Maxle Lite is light, stiff and has loads of clearance. A genuine RockShox replacement DH MaxleBuy RockShox Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM X-Sync Direct Mount Boost MTB Chain RingThis SRAM X-Sync DM Chainring is specifically designed for use on "plus" size mountain bikes with their wider "Boost" type rear hubs and helps to ensure you obtain the perfect chainline for optimum performance. It's equipped with SRAM'S X-SYNC technology, which engages with the chain much quicker than standard chainrings and provides reliable chain retention over all terrains and in all conditions.SRAM 1x has been made even better with the simplicity of the new SRAM X-SYNC Direct Mount chainring. Engineered in Germany, the new Direct Mount rings bring lighter weight and greater simplicity to XX1, X01 and X1-1400 cranksets. SRAM’s Direct Mount rings give riders the perfect opportunity for a serious upgrade.Features: Material: Fully CNC'd Aluminium Recommended Group: XX1 and X01. X1 compatible Weight: 66g (28T), 68g (30T), 71g (32T), 76g (34T)Technologies:X-SYNC: SRAM 1X chainrings provide the highest level of performance and durability. Their tall square teeth edges engage the chain earlier than traditional triangle shaped teeth and their sharp and narrow tooth profile, as well as their rounded chamfer edges, help manage a deflected chain. To provide the best possible performance in muddy conditions, the X-Sync chainrings have been designed with mud-clearing recesses for the inner chain links and rollers. Engineered in Germany, X-Sync rings are an integral part of the SRAM 1X drivetrain.Boost: With revolutionary advancements in bicycle componentry, like SRAM's XX1, X01 and X1 drivetrains, mountain bike designers have been given almost limitless freedom to focus solely on the performance of the bike. Each advancement demands that the entire package works flawlessly. Aggressive Trail and Enduro riders have been increasingly enjoying the benefits of larger wheels, but many still view 27.5" and 29" wheels as a possible weak link. This is why SRAM has developed an open standard with Boost compatible components for SRAM drivetrain, hubs and RockShox forks.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM X-Sync Direct Mount Boost MTB Chain RingThis SRAM X-Sync DM Chainring is specifically designed for use on "plus" size mountain bikes with their wider "Boost" type rear hubs and helps to ensure you obtain the perfect chainline for optimum performance. It's equipped with SRAM'S X-SYNC technology, which engages with the chain much quicker than standard chainrings and provides reliable chain retention over all terrains and in all conditions.SRAM 1x has been made even better with the simplicity of the new SRAM X-SYNC Direct Mount chainring. Engineered in Germany, the new Direct Mount rings bring lighter weight and greater simplicity to XX1, X01 and X1-1400 cranksets. SRAM’s Direct Mount rings give riders the perfect opportunity for a serious upgrade.Features: Material: Fully CNC'd Aluminium Recommended Group: XX1 and X01. X1 compatible Weight: 66g (28T), 68g (30T), 71g (32T), 76g (34T)Technologies:X-SYNC: SRAM 1X chainrings provide the highest level of performance and durability. Their tall square teeth edges engage the chain earlier than traditional triangle shaped teeth and their sharp and narrow tooth profile, as well as their rounded chamfer edges, help manage a deflected chain. To provide the best possible performance in muddy conditions, the X-Sync chainrings have been designed with mud-clearing recesses for the inner chain links and rollers. Engineered in Germany, X-Sync rings are an integral part of the SRAM 1X drivetrain.Boost: With revolutionary advancements in bicycle componentry, like SRAM's XX1, X01 and X1 drivetrains, mountain bike designers have been given almost limitless freedom to focus solely on the performance of the bike. Each advancement demands that the entire package works flawlessly. Aggressive Trail and Enduro riders have been increasingly enjoying the benefits of larger wheels, but many still view 27.5" and 29" wheels as a possible weak link. This is why SRAM has developed an open standard with Boost compatible components for SRAM drivetrain, hubs and RockShox forks.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM X-SYNC 11 Speed Argon Grey ChainringsAll set for clocking up the miles, this chainring gives you the highest level of performance and durability on your road bike adventures. It features a hard-wearing aluminium construction, which makes it perfect at handling all the intensity that comes with long days out on the road. SRAM has also put this version through a CNC-machining process which shaves off any excess material. This allows you to benefit from its fantastic strength without adding any unnecessary weight to your ride. Features: Material: CNC-machined 7075-T6 Aluminium Finish: Anodised Use: Road BCD: 130mm Tooth Profile: Narrow Wide Speed: 11 speedTechnologies: SRAM X-SYNC: 1x chain rings provide the highest level of performance and durability. The SRAM X-SYNC tall square teeth edges engage the chain earlier than traditional triangle shaped teeth. The sharp and narrow tooth profile, as well as rounded chamfer edges, help manage a deflected chain. To provide the best possible performance in muddy conditions, the X-SYNC chain rings have been designed with mud-clearing recesses for the inner chain links and rollers. Engineered in Germany, X-SYNC rings are an integral part of the SRAM 1X drivetrain.Buy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
SRAM's new HS2 Rotors are mountain bike specific and designed to improve braking performance, with 7% more power than their Centreline rotors while also reducing noise and heat dissipation.Thicker 2.00mm rotor for improved power and heat managementRecessed spokes with thermal dissipating paint reduce heat build upNew brake track pattern proves 7% more power and reduces noiseCentre Lock rings includedThe HS2 is designed to bring next level braking performance, with the latest technology and design to bring you to a stop quicker and do it for longer. The HS2 is not only thicker than a regular rotor at 2.00mm but it also features a redesigned brake track that improves power by 7% compared to SRAM's Centreline Rotors. The larger surface area is also teamed with recessed spokes coated with thermal dissipating paint to dramatically reduce heat build up; even the longest, steepest descents won't trouble the heat management properties of the HS2. If you want a great value way to get some power and capability from your brakes, check out the SRAM HS2 Rotors!
SRAM'S Super Narrow 10-speed PowerChain features the PowerLock connecting link the only secure tool-less attachment device for a sub 6mm chain in todays market. Closing Link: PowerLockWeight: 257g (114 links)Rivet Type: HollowPinCompatibility: 10-SpeedSRAM PC-1091R series chains also feature HollowPin construction and outer plates with lighting holes for weight savings with no sacrifice of strength. Lightweight, smooth, precise-shifting. A true high-performance product. Compatibility extends to industry-standard 10-speed systems.
Features: Heat-treated steel cogs with aluminum spider Compatible with PC-1170 and PC-1130 chains 11-36 cassette is available in steel or black finish Specifications:Technology Highlight(s): Semi-spidered steel cogs, PowerGlide™Weight: 260g (11-26), 271g (11-28), 310g (11-32), 420g (11-36)Material: Heat-treated steel cogs/ aluminum spider (3 cogs)/ steel lock-ringGear Ratios: 11-26: 11,12,13,14,15,16,17,19,21,23,26, 11-28: 11,12,13,14,15,16,17,19,22,25,28, 11-32: 11,12,13,14,15,17,19,22,25,28,32, 11-36: 11,12,13,15,17,19,22,25,28,32,36Speeds: 11Colors: Blast Silver, Black (11-36 only)Recommended Chain: SRAM PC 1130Lock Ring Material: SteelRecommended Group: SRAM Rival® 1, SRAM Rival® 22Available in: 11-26, 11-28, 11-32, 11-36 (steel or black finish)Compatibility: SRAM Rival® 1, SRAM Rival® 22, SRAM PC 1170, SRAM PC 1130
This stunning 12 speed rear mech is specifically designed for MTB use as it brings you the shifting performance you need to thrive on the trails. Its proven SRAM 1x-specific X-HORIZON design easily facilitates 11-50T and 10-50T cassette capacities for quieter and more consistent gearing. To top it off, it provides you with some of the finest industry-changing technologies at an affordable price. Technologies: Cage Lock: With Cage Lock technology in the rear derailleur, wheel removal and installation, as well as chain installation, becomes faster and simpler. Just push the cage forward to create slack and lock it into place X-Actuation: Developed specifically for SRAM 1x drivetrains, X-Actuation keeps shifting sharp and consistent across the entire cassette. This makes gears easy to index and provides exceptional performance. X-Sync: X-Sync Eagle is the next evolution of SRAM X-Sync technology. The aggressive tooth design provides better chain retention for a smoother, more efficient pedal feel. With a focus on long wear-life, the X-Sync Eagle design reduces friction and the accumulation of mud, grit and grime. X-Horizon: The X-Horizon ‘straight parallelogram' design limits all movement on the horizontal axis, which makes ghost shifting impossible while also reducing shift force. The large upper pulley offset design maintains a constant chain gap across all gears and guarantees faster and more exact shifting.
The SRAM PG-1130 is constructed from steel, which makes it slightly heavier but also cuts down the cost significantly. It retains the same PowerGlide tooth profile as the more expensive SRAM cassettes for fast and accurate shifting. Weight from 260g (11-26T).