Key Features: A bespoke pair of snap ring or circlip pliers designed to work with the fittings found on suspension and hydraulic systems,Forged for strength and durability and then dipped in Park blue vinyl for comfort and grip,1.3mm bent internal size,Covered by Park Tool's legendary lifetime warranty.
Part of a range of combination Headset wrenches that cover all bicycle requirementsThe Y-head design puts metal where it is needed for strength and durabilityThe laser-cut openings are a precise fit, as this operation takes place after the heat treatment processFeatures a 15 mm pedal wrench, and 32 mm wrench for 1 inch Headsets
The Park Tool 15" SWB-15 is a forged steel breaker bar with a 3/8" square drive head that pivots 180º. Features a long, knurled handle, which is extremely useful when extra leverage is needed to remove stubborn fasteners.Features a long, knurled handle, which is extremely useful when extra leverage is needed to remove stubborn fastenersMade in the USA and covered by Park Tool's legendary limited lifetime warranty
The Park Tool Precision Hex Driver is a professional quality component hex driver precisely machined to exact standards to ensure a perfect fit on compatible component fasteners. Featuring an ergonomic, CNC machined, perfectly balanced 6061 aluminium handle hard anodized to take the rigors of everyday use.Professional quality component hex driver precisely machined to exact standards to ensure a perfect fit on compatible component fastenersFeaturing an ergonomic, CNC machined, perfectly balanced 6061 aluminium handle hard anodized to take the rigours of everyday use
A selection of essential Torx wrenches in a convenient folding packageOne piece composite handle is comfortable lightweight and slip resistant - and 40% stronger than steelWrenches are made from high torque Bondhus Protanium industrial quality tool steel for a long lifeEasy to recognise on the work bench or tool box as this Torx set comes in green rather than the traditional Park blueThe T7 T9 T10 T15 T20 T25 T27 T30 and T40 Torx sizes supplied cover all the requirement of bikes todayTorx wrenches are becoming increasingly popular on Disc brakes and chainring bolts as they make it harder to round off bolts
The Park Tool PP1 Hydraulic Brake Piston Press has a unique shape perfect for compressing the hydraulic piston by pushing the brake pads apart to speed up servicing and pad replacement. Slide the polished, wedge shaped tool between pads to expand the gap and pre-set the pistons into the caliper.
The Park Tool SPA6C uses hardened, replaceable pins. Designed for heavy-duty use, the distance between pins is adjustable, allowing use on virtually any hanger cup.
These Park Tool SD0, SD2, SD3, SD6 Screwdrivers are shop quality screwdrivers designed for comfort and durability. Featuring dual density grips and heat-treated, chrome vanadium tips and shafts.SD-0: No:0 Phillips SD-2: No: 2 PhillipsSD-3: 3mm flat bladeSD-6: 6mm flat blade
The Park Tool CCP-22 uses a long comfortable handle and extra fine thread that provides the needed leverage to remove even the tightest cranks. The unique "floating tip" ensures smooth operation and long life. As with most Park Tool products, it also features a hole specifically designed for hanging on a tool wall.
The Park Tool CCP-44 is specifically designed to remove crank arms from splined Shimano® Octalink and ISIS Drive® bottom bracket spindles that do not use a self-extracting system.
FR-2 Features: Fits older Sun Tour® two notch freewheels Two notches are approximately 25mm across measured outside to outside Always use a skewer or axle nut to hold remover firmly in place FR-4 Features: Fits Atom®, Regina®, splined Zeus®, and some Schwinn®-approved freewheels The FR-4 has 20 splines and is approximately 21.6mm in diameter Center bore for axle clearance is 10mm Always use a skewer or axle nut to hold tool firmly in place during removal FR-6 Features: Removes four-notch BMX / single-speed freewheel from hubs with 1.37 x 24 TPI threads The FR-6 has four notches approximately 32mm across measured inside to inside and 40mm outside to outside Fits over axles up to 16mm thread diameter Always use a skewer or axle nut to hold tool firmly in place during removal
Park Tool Freewheel Remover Tool - FRHeat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts.Fits Suntour 2 Pin (FR-2): Fits older Sun Tour two notch freewheels Two notches are approximately 25mm across measured outside to outside Always use a skewer or axle nut to hold remover firmly in placeFits Atom - Regina -Zeus (FR-4): Fits Atom, Regina, splined Zeus, and some Schwinn Approved freewheels The FR-4 has 20 splines and is approximately 21.6mm in diameter Always use a skewer or axle nut to hold remover firmly in placeFits BMX 4-Pin (FR-6): Removes four-notch BMX / single-speed freewheel from hubs with 1.37 x 24 TPI threads The FR-6 has four notches approximately 32mm across measured inside to inside and 40mm outside to outside Fits over axles up to 16mm thread diameter Always hold the remover secure to the hub using axle nut or quick release skewer.NOTE: The Sun Tour four notch freewheels do not accept the FR-2 remover. Buy Park Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Crank Puller (CCP-22)With its long handle and the finely threaded head, the CCP-22 crank arm removal tool quickly attaches and gives you the advantage you need for removing stubborn crank arms. Park Tool has made it to be compatible with a wide range of models, making it ideal for home mechanics and professional mechanics alike.Features:Fits all cranks using 22mm x 1 threads and square, tapered bottom bracket spindles Also fits "Power Spline" cranks from SRAM using the 8mm thread bolt The strong rotating tip system ensures smooth operation and long lifeNOTE: For cranks using the ISIS Drive or Octalink system, look for the CCP-44 or the CWP-7 models.Buy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Crank Puller (CCP-44)With its long handle and fine thread to engage fully with compatible cranksets, the CCP-44 Crank Puller gives you the grip and control for removing even the most stubborn crank arms. Park Tool has made this easy to use pulling tool compatible with a wide range of Shimano Octalink and FSA ISIS Drive models.Features: Specifically designed to remove crank arms from splined Shimano® Octalink and ISIS Drive® bottom bracket spindles that do not use a "self-extracting" system22 x 1mm fine thread provides leverage needed to remove tight crank armsStrong rotating tip system ensures smooth operation and long life Not suitable for use with square taper type cranksetsBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
What more could you want than pizza after a good day of wrenching or riding? An update of one of the all-time greats the PZT-2 Pizza Tool is bigger (for better hand position) better (super sharp large diameter stainless steel cutting wheel cuts through even the toughest terrain) and stronger! Amaze your friends show off to your in-laws; a bicycle and also a pizza cutter! Covered by Park Tool's legendary limited lifetime warranty
Key Features: The Park tool 768 is a 43.8mm pilot for facing head tubes using the low profile Zero Stack type headset,The 768 is used with the 690-XL facer and the 750 centering cone adapter,Facing the head tube will improve the alignment of the bearings,The 768 pilot fits the Park tool HTR-1 Head tube Reamer and Facer Set.
The CCP-4 Crank Puller is specifically designed to remove crank arms from splined Shimano Octalink and ISIS Drive bottom bracket spindles that do not use a One Key Release systemIt uses a long, comfortable handle and a fine thread for the leverage needed to remove tight crank armsUnique rotating tip design has been updated over the CCP-4 and ensures even smoother operation and longer lifeNote: The CCP-44 will not work on crank arms that fit standard square, tapered bottom bracket spindles
The BBT-19.2 is a heavy duty shop quality tool for installing and removing Shimano SRAM Truvativ Race Face FSA and Campagnolo 16-notch external bottom bracket cups with an outside diameter of 44 mmUpdated to be more accurate and longer lasting the BBT-19.2 can be turned with a 3/8 inch drive torque wrench or ratchet a 1 inch wrench or a Park Tool FRW-1 Freewheel Remover Wrench
A chain tool that is small enough to go anywhere yet which performs like a full size workshop toolFine thread and slide-away T-handle gives plenty of pressure at the pin head to move stubborn chain rivetsIncludes a loosening shelf to release stiff links after assemblyReplaceable driving pin headWorks on most bicycle chains including 10-speedWeighs just 77 grams
The Park Tool Sliding T-Handle Hex Wrench is a professional quality T-Handle hex wrench built for speed, efficiency, leverage and a perfect fit.Carefully selected combination of Chrome Vanadium and S-2 tool steelsUnique anodized aluminium Speed Spinner makes running long bolts in and out quick and effortlessMachined, chamfered tips allow easier insertion into hex fittingsIntegrated Strip-Gripper twisted hex that makes removal of most bolts with stripped or oversized hexes fast and easySliding T-handle creates increased leverage and multiple access positions