DMR V8 Pedals BlackWith an updated design from the classic V8, the latest iteration of this iconic pedal provides better grip and stability than ever before. Tuneable pins adjust the grip and feel to suit personal preference.Key FeaturesLarge Platform area enhances stability and controlUltra-low profileTen tunable pins per sideFully serviceable Dual DU bushing systemTech SpecsWeight: 480g (pair)Axles: Heavy duty 4140 CroMo steelBody: Die-cast aluminiumPlatform: 95x100mmPlease note: Torque settings at the axle to crank for all DMR pedals is up to 40-55Nm.
V12 Mag PedalsOver 18 years of production, the V12 has become the benchmark for flat pedal performance. DMR has redesigned the classic V12 and made it better than ever.Larger Platform AreaThe new DMR V12 Magnesium [Mg] offers 10% more surface area than the classic shape. This means better grip and also support for rougher conditions and bigger hits.Lower ProfileAt just 16mm deep, the V12 is as slim as possible whilst retaining that legendary concave feel.Lighter WeightThere is a 20% weight saving from the last V12, with the standard version weighing under 430g per pair and the Magnesium at just 350g.The V12 runs on fully sealed bearings and a CroMo axle. All pins on the pedal are replaceable and tuneable for the preferred grip and feel.Tech SpecsFully sealed bearingsCro-mo axleReplaceable pins350g per pair95x100mm platformPlease note: The maximum torque setting at the axle to crank for all DMR pedals is 40-55Nm.
DMR V12 Pedals BlackOver 18 years of production, the V12 has become the benchmark for flat pedal performance for mountain bikes. This latest iteration is lighter and features a greater surface for outstanding grip and stability. FeaturesLARGER PLATFORM AREA - The new V12 offers 10% more surface area than the classic shape. This means better grip and also support for rougher conditions and bigger hits.LOWER PROFILE - At just 16mm deep, the V12 is as slim as possible whilst retaining that legendary concave feel.LIGHTER WEIGHT - There is a 20% weight saving from the last V12, with the standard version weighing under 430g per pair.Tech SpecsSealed bearings for improved durabilityCro-Mo axleClassic DMR concave shape offers enhanced sole-to-platform engagement 95x100mm for a more stable basePlease note: Maximum torque setting at the axle to crank for all DMR pedals is 40-55Nm.
Vault PedalsThe DMR Vault pedal is a tuneable flat pedal designed specifically for riders who want a bigger platform. Equally, at home on an all-mountain or downhill setup, the DMR Vault pedal offers great stability and grip for the bumpiest of trails.Tech SpecsLarge Platform: 105mm x 105mmLight: 400g per pairSlim: 17mm concave footbedTough: Extruded 6061 CNC-machined Aluminium bodyReliable: 4140 Cro-mo Steel axles (9/16″)Tuneable: 22 replaceable flip pins to fine-tune the gripServiceable: High load DU bush and cartridge bearing
DMR does performance composite. Presenting the V11 pedal. For those that favour the durability, compliance and affordability of composite pedals, the new benchmark choice from DMR has arrived! The V11 is moulded with the same proven shape as the multi award-winning Vault pedal, providing a huge platform with DMR’s unique concave shape that allows your foot to sit deep into the centre for supreme grip. V11’s durable glass reinforced nylon body features eleven replaceable steel pins each side for rock solid grip. All pins are secured with captive locknuts for ultimate durability. Outer pins are Vault Moto pins that sink deep into your shoe, keeping your foot well and truly planted. V11 is fully rebuildable with the same proven internals as DMR Vault pedals, guaranteeing ride after ride with no-nonsense performance. Features Durable glass reinforced nylon body. Large platform area 105mm x 105mm. Low profile body with concave foot bed. Tuneable pins with outer Moto Pins for serious grip. Strong 4140 Cro-mo black steel axles (9/16 ) with 6mm hex key fitting. Fully serviceable for long life. Weight 450g/pair. Colours: Black, Blue, Green, Orange, Purple, Red, Turquoise, Yellow.
DMR does performance composite. Presenting the V11 pedal. For those that favour the durability, compliance and affordability of composite pedals, the new benchmark choice from DMR has arrived! The V11 is moulded with the same proven shape as the multi award-winning Vault pedal, providing a huge platform with DMR’s unique concave shape that allows your foot to sit deep into the centre for supreme grip. V11’s durable glass reinforced nylon body features eleven replaceable steel pins each side for rock solid grip. All pins are secured with captive locknuts for ultimate durability. Outer pins are Vault Moto pins that sink deep into your shoe, keeping your foot well and truly planted. V11 is fully rebuildable with the same proven internals as DMR Vault pedals, guaranteeing ride after ride with no-nonsense performance. Features Durable glass reinforced nylon body. Large platform area 105mm x 105mm. Low profile body with concave foot bed. Tuneable pins with outer Moto Pins for serious grip. Strong 4140 Cro-mo black steel axles (9/16 ) with 6mm hex key fitting. Fully serviceable for long life. Weight 450g/pair. Colours: Black, Blue, Green, Orange, Purple, Red, Turquoise, Yellow.
The all new DMR Blade chainring is now 12 speed compatible. The DMR Blade chainring is now 10, 11 and 12 speed compatible. The DMR Blade MTB chainring has a Wide/Narrow tooth design for ultimate chain retention and when combined with a clutch mech, no chain device is needed. This DMR chainring is manufactured from stiff 4mm wide 7075-T6 Aluminium maintaining direct power transfer. Superlight: 30T- 63g | 32T- 67g | 34T- 74g | 36T- 85g. Save 100g on your spider, chainring and chainring bolts setup. DMR Blade chainring is compatible with any cranks using the SRAM DM interface. Wide/Narrow tooth design for maximum chain retention. Specification Stiff 4mm wide 7075-T6 Aluminium. This direct mount chainring is compatible with SRAM DM interface. Fits Shimano/KMC/SRAM 10, 11 and 12 speed chains. 6mm offset for standard rings, 3mm offset for Boost.
The all new DMR Blade chainring is now 12 speed compatible. The DMR Blade chainring is now 10, 11 and 12 speed compatible. The DMR Blade MTB chainring has a Wide/Narrow tooth design for ultimate chain retention and when combined with a clutch mech, no chain device is needed. This DMR chainring is manufactured from stiff 4mm wide 7075-T6 Aluminium maintaining direct power transfer. Superlight: 30T- 63g | 32T- 67g | 34T- 74g | 36T- 85g. Save 100g on your spider, chainring and chainring bolts setup. DMR Blade chainring is compatible with any cranks using the SRAM DM interface. Wide/Narrow tooth design for maximum chain retention. Specification Stiff 4mm wide 7075-T6 Aluminium. This direct mount chainring is compatible with SRAM DM interface. Fits Shimano/KMC/SRAM 10, 11 and 12 speed chains. 6mm offset for standard rings, 3mm offset for Boost.
The all new DMR Blade chainring is now 12 speed compatible. The DMR Blade chainring is now 10, 11 and 12 speed compatible. The DMR Blade MTB chainring has a Wide/Narrow tooth design for ultimate chain retention and when combined with a clutch mech, no chain device is needed. This DMR chainring is manufactured from stiff 4mm wide 7075-T6 Aluminium maintaining direct power transfer. Superlight: 30T- 63g | 32T- 67g | 34T- 74g | 36T- 85g. Save 100g on your spider, chainring and chainring bolts setup. DMR Blade chainring is compatible with any cranks using the SRAM DM interface. Wide/Narrow tooth design for maximum chain retention. Specification Stiff 4mm wide 7075-T6 Aluminium. This direct mount chainring is compatible with SRAM DM interface. Fits Shimano/KMC/SRAM 10, 11 and 12 speed chains. 6mm offset for standard rings, 3mm offset for Boost.
DMR does performance composite. Presenting the V11 pedal. For those that favour the durability, compliance and affordability of composite pedals, the new benchmark choice from DMR has arrived! The V11 is moulded with the same proven shape as the multi award-winning Vault pedal, providing a huge platform with DMR’s unique concave shape that allows your foot to sit deep into the centre for supreme grip. V11’s durable glass reinforced nylon body features eleven replaceable steel pins each side for rock solid grip. All pins are secured with captive locknuts for ultimate durability. Outer pins are Vault Moto pins that sink deep into your shoe, keeping your foot well and truly planted. V11 is fully rebuildable with the same proven internals as DMR Vault pedals, guaranteeing ride after ride with no-nonsense performance. Features Durable glass reinforced nylon body. Large platform area 105mm x 105mm. Low profile body with concave foot bed. Tuneable pins with outer Moto Pins for serious grip. Strong 4140 Cro-mo black steel axles (9/16 ) with 6mm hex key fitting. Fully serviceable for long life. Weight 450g/pair. Colours: Black, Blue, Green, Orange, Purple, Red, Turquoise, Yellow.
The DMR DeathGrip Flangeless is the second collaboration between DMR bikes and Brendog. ‘I wanted to make the ultimate grip to go on all my bikes: AM to DH. I combined the following features and the DeathGrip is what we ended up with!’ Brendan Fairclough. Tapered Core for Security. Waffle and Knurl for Grip. Mushroom for comfort. We started with an internally tapered single-lock core grip and wrapped Brendan's design around it in soft Kraton compound for the ultimate mountain bike handlebar grip. These DMR Grips are available in various colours, soft or firm. Tapered Core | No need for outer lock ring Waffle and Knurl for grip Mushroom for comfort Available in Thin (ø29.8) or Thick (ø31.3) Soft durometer of 20A for all colours, apart from Gum which is a harder but longer lasting 25A. 100g per pair
The DMR DeathGrip Race Edition is the second collaboration between DMR bikes and Brendog. ‘I wanted to make the ultimate grip to go on all my bikes: AM to DH. I combined the following features and the DeathGrip is what we ended up with!’ Brendan Fairclough. Tapered Core for Security. Waffle and Knurl for Grip. Mushroom for comfort. We started with an internally tapered single-lock core grip and wrapped Brendan's design around it in super-soft Kraton compound for the ultimate mountain bike handlebar grip. These DMR grips are available in various colours, soft or firm. Super Soft 'RACE DAY' Compound | Secret Super-Tacky Formula Tapered Core | No need for outer lock ring Single Lock Ring | Torque to 2nM Waffle and Knurl for grip Mushroom for comfort Available in Thin (ø29.8) or Thick (ø31.3) 100g per pair
SUPER SOFT 'RACE DAY' COMPOUND The DMR DeathGrip Race Edition is the second collaboration between DMR bikes and Brendog. ‘I wanted to make the ultimate grip to go on all my bikes: AM to DH. I combined the following features and the DeathGrip is what we ended up with!’ Brendan Fairclough. Tapered Core for Security. Waffle and Knurl for Grip. Mushroom for comfort. We started with an internally tapered single-lock core grip and wrapped Brendan's design around it in super-soft Kraton compound for the ultimate mountain bike handlebar grip. These DMR grips are available in various colours, soft or firm.
SUPER SOFT 'RACE DAY' COMPOUND The DMR DeathGrip Race Edition is the second collaboration between DMR bikes and Brendog. ‘I wanted to make the ultimate grip to go on all my bikes: AM to DH. I combined the following features and the DeathGrip is what we ended up with!’ Brendan Fairclough. Tapered Core for Security. Waffle and Knurl for Grip. Mushroom for comfort. We started with an internally tapered single-lock core grip and wrapped Brendan's design around it in super-soft Kraton compound for the ultimate mountain bike handlebar grip. These DMR grips are available in various colours, soft or firm.
The all new DMR Blade chainring is now 12 speed compatible. The DMR Blade chainring is now 10, 11 and 12 speed compatible. The DMR Blade MTB chainring has a Wide/Narrow tooth design for ultimate chain retention and when combined with a clutch mech, no chain device is needed. This DMR chainring is manufactured from stiff 4mm wide 7075-T6 Aluminium maintaining direct power transfer. Superlight: 30T- 63g | 32T- 67g | 34T- 74g | 36T- 85g. Save 100g on your spider, chainring and chainring bolts setup. DMR Blade chainring is compatible with any cranks using the SRAM DM interface. Wide/Narrow tooth design for maximum chain retention. Specification Stiff 4mm wide 7075-T6 Aluminium. This direct mount chainring is compatible with SRAM DM interface. Fits Shimano/KMC/SRAM 10, 11 and 12 speed chains. 6mm offset for standard rings, 3mm offset for Boost.
The DMR DeathGrip Flangeless is the second collaboration between DMR bikes and Brendog. ‘I wanted to make the ultimate grip to go on all my bikes: AM to DH. I combined the following features and the DeathGrip is what we ended up with!’ Brendan Fairclough. Tapered Core for Security. Waffle and Knurl for Grip. Mushroom for comfort. We started with an internally tapered single-lock core grip and wrapped Brendan's design around it in soft Kraton compound for the ultimate mountain bike handlebar grip. These DMR Grips are available in various colours, soft or firm. Tapered Core | No need for outer lock ring Waffle and Knurl for grip Mushroom for comfort Available in Thin (ø29.8) or Thick (ø31.3) Soft durometer of 20A for all colours, apart from Gum which is a harder but longer lasting 25A. 100g per pair
The DMR DeathGrip Flangeless is the second collaboration between DMR bikes and Brendog. ‘I wanted to make the ultimate grip to go on all my bikes: AM to DH. I combined the following features and the DeathGrip is what we ended up with!’ Brendan Fairclough. Tapered Core for Security. Waffle and Knurl for Grip. Mushroom for comfort. We started with an internally tapered single-lock core grip and wrapped Brendan's design around it in soft Kraton compound for the ultimate mountain bike handlebar grip. These DMR Grips are available in various colours, soft or firm. Tapered Core | No need for outer lock ring Waffle and Knurl for grip Mushroom for comfort Available in Thin (ø29.8) or Thick (ø31.3) Soft durometer of 20A for all colours, apart from Gum which is a harder but longer lasting 25A. 100g per pair
The DMR Vault pedal is a tuneable MTB flat pedal designed specifically for riders who want a bigger platform. Equally at home on an all mountain or downhill setups, the DMR Vault pedal offers great stability and grip for the bumpiest of trails 105mm x115mm Platform 430g per pair 17mm concave foot bed Extruded 6061 Aluminium and 4140 Cro-mo Steel axles (9/16 ) 11 pins per pedal. Flip the pins to fine-tune the grip High load DU bush and cartridge bearing Stand out from the crowd with the new special edition Liquid Camo series products from DMR. We’ve taken our much-loved Vault pedals, Defy stem and Wingbar handlebar, and enhanced them with a durable Triple Anodised finish. Opt for the full set and drench your bike in liquified camo style.
The DMR DeathGrip Flangeless is the second collaboration between DMR bikes and Brendog. ‘I wanted to make the ultimate grip to go on all my bikes: AM to DH. I combined the following features and the DeathGrip is what we ended up with!’ Brendan Fairclough. Tapered Core for Security. Waffle and Knurl for Grip. Mushroom for comfort. We started with an internally tapered single-lock core grip and wrapped Brendan's design around it in soft Kraton compound for the ultimate mountain bike handlebar grip. These DMR Grips are available in various colours, soft or firm. Tapered Core | No need for outer lock ring Waffle and Knurl for grip Mushroom for comfort Available in Thin (ø29.8) or Thick (ø31.3) Soft durometer of 20A for all colours, apart from Gum which is a harder but longer lasting 25A. 100g per pair
The DMR DeathGrip Flangeless is the second collaboration between DMR bikes and Brendog. ‘I wanted to make the ultimate grip to go on all my bikes: AM to DH. I combined the following features and the DeathGrip is what we ended up with!’ Brendan Fairclough. Tapered Core for Security. Waffle and Knurl for Grip. Mushroom for comfort. We started with an internally tapered single-lock core grip and wrapped Brendan's design around it in soft Kraton compound for the ultimate mountain bike handlebar grip. These DMR Grips are available in various colours, soft or firm. Tapered Core | No need for outer lock ring Waffle and Knurl for grip Mushroom for comfort Available in Thin (ø29.8) or Thick (ø31.3) Soft durometer of 20A for all colours, apart from Gum which is a harder but longer lasting 25A. 100g per pair